Kenmore 79094243310 electric range Parts

On Kenmore electric range model 79094243310, the model and serial information is on the serial plate located on the left side of the warmer drawer frame; open the warmer drawer to view it clearly. This location is shown in the 79094243310 owner's manual.

Check these common label locations in this order:

• Open the warmer drawer and look on the left side of the warmer drawer frame (serial plate location for this model)
• Look along the oven door frame/door jamb area (some ranges place the label here)
• Check the back panel near the upper venting area (common on some installations)
• If your range has a storage drawer instead of a warmer drawer, check the frame behind the drawer front

1. Pull the warmer drawer fully open.
2. Use a flashlight and look on the left vertical frame.
3. Record both the model number and serial number exactly as printed.

We use the model number to match the correct Kenmore range parts (like a bake element, oven temperature sensor, or control board) and to ensure troubleshooting steps and wiring information align with your exact configuration.

Last updated: January 2026

The Kenmore 79094243310 is part of the Kenmore 790.9420/9424/9624* electric range family, but the excerpts we have for this model family do not list the oven cavity size (in cubic feet) or the exterior dimensions. For exact measurements, use the specs section in the 79094243310 owner's manual.

When customers ask for oven “size,” it typically refers to one of these:

• Oven capacity (cubic feet): how much fits inside the oven
• Exterior dimensions (width, height, depth): whether it fits your space
• Cutout/clearance needs: required spacing to cabinets and walls
• Rack positions and usable width: practical cooking space

For the Kenmore 79094243310, the most reliable way to confirm all of the above is to match the model number on the appliance rating plate to the specifications listed in the manual.

Use these sources in this order:

1. Specifications section in the 79094243310 owner's manual
2. Installation clearances and electrical requirements in the 79094243310 installation guide
3. The rating plate on the range (commonly behind the storage drawer or on the oven frame) to confirm the model number matches

These are common ranges for many 30-inch freestanding electric ranges (use the manual for the exact numbers for 79094243310):

Getting the correct oven size prevents installation surprises (clearances, depth, and electrical hookup location) and helps you choose correctly sized bakeware, oven racks, and replacement parts.

Last updated: January 2026

Kenmore model 79094243310 is made for Kenmore by Frigidaire (Electrolux/Frigidaire platform). The key clue is the 790 model prefix, which identifies the manufacturing source for many Kenmore ranges; you can confirm the exact model family details in the 79094243310 owner's manual.

We recommend checking the model and serial tag on the range to verify the full model number and prefix.

• Look for the identification tag on the oven frame area (often visible when you open the oven door).
• Confirm the model number is 79094243310 (not a close variation).
• Note the 790 prefix; that prefix is the manufacturer identifier used for many Kenmore ranges.
• Match the model family shown in the manual (the Use & Care Guide covers model families such as 790.9420 / 9424 / 9624).

Knowing the manufacturer platform helps you choose compatible parts and follow the right diagnostic steps for heating, error codes, and control issues.

• Parts catalogs and diagrams are organized by the exact model platform.
• Common service parts (like an oven temperature sensor or control board) are often shared across the same platform.
• Error code definitions and reset steps can vary by platform.

If your display is showing an F-code or other fault, use a Kenmore range error code reference that matches the 790 platform: Kenmore 790 self-cleaning range error codes.

Using the correct manufacturer platform prevents ordering the wrong surface element switch, oven sensor, or control board, and it speeds up troubleshooting.

Last updated: January 2026

To reset your Kenmore electric range model 79094243310, we recommend doing a control reset first (factory default reset), then a power reset if needed. The factory reset restores common user settings like clock mode, tones, and any oven temperature offset back to default.

Use this when the display settings changed, the oven temperature offset seems wrong, or the control is acting oddly.

• Press and hold 7 on the numeric keypad until you hear an acceptance tone (about 6 seconds).
• Press START to complete the reset.
• Re-enter any preferences you want (clock format, tones, temperature units).

For the exact button sequence and what settings get restored, use the 79094243310 owner's manual.

Use this when the control is frozen, the keypad is unresponsive, or the range is stuck in an error state.

• Turn OFF the range circuit breaker for 1 minute.
• Turn the breaker ON.
• Set the clock and test Bake.

If the breaker trips again or you smell burning, leave power off and have the wiring checked.

A reset clears settings, but it does not repair failed parts. These checks narrow down what is actually failing.

• If the oven heats unevenly or won’t hold temperature, test the sensor circuit and consider the frigidaire range oven temperature sensor 316490000.
• If you see an error code after resetting, look it up by symptom using Kenmore 790 self-cleaning range error codes.
• If the display works but heating functions fail, inspect heating components (bake element, broil element) and wiring connections.
• If the control is dead or randomly resets, check the power supply and terminal block connections.

On model 79094243310, a factory reset also clears any oven temperature adjustment (offset) back to 0, which can immediately fix “my oven runs hot/cold” complaints caused by an accidental setting change.

Last updated: January 2026