What are the dimensions of a Kenmore Elite refrigerator?
Kenmore Elite refrigerator dimensions vary by model and style; for the Kenmore 10656932600 side-by-side refrigerator, the exact cabinet dimensions are listed in the installation guide. If you are comparing “Kenmore Elite” models, use the model number and measure your opening so the refrigerator fits with proper door swing and ventilation.
How to get the right dimensions for your space
Use these checks before you buy, move, or replace a refrigerator:
- Find the full model number on the rating label and match it to the documentation.
- Measure the opening width, height, and depth in at least 3 spots (floors and walls are rarely perfectly square).
- Plan for door swing and drawer clearance, especially next to a fixed wall.
- Confirm you have room behind the unit for the water line if you have an ice maker.
- Leave ventilation clearance around the cabinet (see the guide for your model).
Typical clearances you should plan for (side-by-side)
Our Kenmore 10656932600 documentation calls out ventilation spacing guidelines that are common for this style.
| Clearance area | Typical minimum | Why it matters |
|---|---|---|
| Each side and top | 1/2 inch | Helps airflow and cooling efficiency |
| Next to a fixed wall | 2 inches | Helps the doors open fully |
| Back (with ice maker) | Extra space | Allows room for water line connections |
Why it matters
If the refrigerator is too tight in the opening, you can end up with doors that do not open fully, restricted airflow that hurts cooling performance, and pinched water lines that cause slow water dispensing or ice maker issues.
Related parts that affect fit and function
If you are troubleshooting door closing or dispenser fit issues while you are checking clearances, these model-matched parts are commonly involved:
- Refrigerator door closer cam WPW10329686 (helps the door close and align)
- Refrigerator water filter cap (black) WP2260518B (cap fit can affect filter seating)
Last updated: February 2026
How much does a Kenmore side-by-side refrigerator weigh?
Most Kenmore side-by-side refrigerators weigh about 250 to 320 lb empty. For your Kenmore 10656932600, the exact shipping and net weight are typically listed in the specifications section of the owner's manual.
Typical weight ranges (what to expect)
Side-by-side refrigerator weight varies mainly by cabinet size, dispenser/ice maker hardware, and insulation.
- Counter-depth models often weigh less than full-depth models
- In-door ice and water adds weight (ice maker, auger, dispenser parts)
- Glass shelves and bins add weight compared to wire shelving
- Compressor and sealed system weight is similar across many models
| Refrigerator type | Typical empty weight |
|---|---|
| Compact/top freezer (for comparison) | 100 to 200 lb |
| Side-by-side (most homes) | 250 to 320 lb |
| Large built-in style | 350 lb and up |
Why the exact weight matters
Knowing the weight helps us plan safe moving, flooring protection, and door removal.
- Confirms whether 2 people can move it safely or if 3+ are needed
- Helps choose the right appliance dolly rating
- Reduces risk of floor damage and door frame damage
Moving and handling tips for model 10656932600
We recommend these steps before moving a side-by-side refrigerator:
- Empty food and ice, and remove loose bins and shelves (crisper, meat pan, door bins)
- Shut off the water supply and disconnect the water line if equipped
- Protect floors with hardboard or sliders
- Keep the refrigerator upright during transport
- After moving, let it stand upright 4 to 24 hours before plugging in (longer if it was tilted)
Clearance reminder during moves
When reinstalling, allow ventilation space around the cabinet; the installation guide covers placement clearances and door swing space.
Last updated: February 2026
What is the code Sy Ef on a Kenmore refrigerator?
The SY EF code on a Kenmore refrigerator indicates a communication problem between the main control and the evaporator (freezer) fan circuit, most often the evaporator fan motor feedback or its wiring. On Kenmore model 10656932600, this typically shows up when airflow through the freezer is reduced and temperatures start drifting. See the 10656932600 owner's manual for display and operating details.
What to check first (quick triage)
- Power reset: Unplug the refrigerator (or switch off the breaker) for 5 minutes, then restore power.
- Airflow blockage: Make sure packages are not blocking freezer vents or the return air path.
- Frost buildup: Heavy frost on the freezer back panel points to a defrost problem that can stop the fan.
- Door sealing: A leaking door gasket can cause excess frost and fan issues.
- Listen for the fan: With the freezer door closed (door switch held), you should typically hear the evaporator fan running.
Common causes and related parts
SY EF is usually tied to the evaporator fan system or conditions that prevent it from moving air.
| Likely cause | What you may notice | What to do next |
|---|---|---|
| Evaporator fan not running | Warm freezer or fresh food section, weak airflow | Check for ice obstruction; inspect wiring and fan area |
| Defrost system issue | Frost blanket on freezer panel, fan noise changes | Inspect defrost components; address frost source |
| Control or wiring problem | Code returns quickly after reset | Inspect harness connections; consider control diagnosis |
If you find heavy frost, a failed defrost safety thermostat can be involved; the refrigerator defrost bi-metal WPW10225581 is one model-matched part that’s commonly replaced in defrost-related failures.
Why it matters
The evaporator fan is what moves cold air from the freezer evaporator to both compartments. When the fan circuit is interrupted (or the fan is iced in), the refrigerator can still run but cooling becomes uneven, food can soften, and frost can worsen.
Helpful DIY guidance
For step-by-step troubleshooting of airflow and fan symptoms, use our how to fix your evaporator cooling fan guide.
Last updated: February 2026
What is the cubic foot of my Kenmore Elite refrigerator model 10656932600?
The total capacity for Kenmore model 10656932600 is listed in the specifications or product data section of the 10656932600 owner's manual. Capacity is shown as total cubic feet (fresh food plus freezer) and is the best number to use when comparing storage space.
Where to find the cubic-foot rating
Check these common places for the exact “cu. ft.” value:
- The specifications or product data pages in the 10656932600 owner's manual
- The model and serial tag inside the fresh food compartment (often on a side wall)
- The product data sheet section (sometimes near warranty and accessory information)
Quick reference: capacity terms you may see
| Term | What it means | What to use it for |
|---|---|---|
| Total capacity | Refrigerator + freezer volume | Comparing models and overall storage |
| Fresh food capacity | Refrigerator section only | Planning shelf and bin space |
| Freezer capacity | Freezer section only | Planning frozen storage |
Why it matters
Knowing the correct cubic-foot capacity helps you plan food storage, compare side-by-side refrigerator sizes, and choose organization parts that fit your layout.
Related parts that support storage and water/ice performance
If you are maintaining your 10656932600, these commonly replaced parts are available:
- Refrigerator crisper pan WP2188656 (fresh food storage bin)
- Refrigerator ice maker WPW10190965 (ice production)
- Refrigerator water filter EDR3RXD1 (water and ice filtration)
Last updated: February 2026





