Kenmore Elite 11024952301 washer Parts

Your Kenmore Elite washer model 11024952301 is a top-load, “KING SIZE” capacity design; that label indicates a large tub, which typically falls in the about 3.5 to 4.5 cu. ft. range for washers of this style. For the exact capacity spec, check the 11024952301 owner's manual.

How to confirm capacity for model 11024952301

We recommend using the manual spec first, then verifying by measuring only if you need to match a replacement washer size.

• Look for “capacity” or “cubic feet” in the specifications section of the manual.
• Check the model and serial plate location (often under the lid) to confirm you are reading the correct model.
• If you are comparing washers, focus on tub capacity (cu. ft.), not just “king size” wording.
• When replacing the washer, also confirm hose reach and drain standpipe height so the new unit fits your laundry setup.

If you need to estimate by measuring (quick method)

If you cannot find the capacity line quickly, you can estimate tub volume by measuring the inside of the basket.

• Measure the inside diameter of the basket (inches).
• Measure the usable depth to the normal fill line (inches).
• Use the cylinder estimate: cu. ft. ≈ (π × (D/2)^2 × depth) / 1728.

Method	What you get	Best for
Manual specification	Exact rated capacity	Buying a replacement washer
Basket measurement	Close estimate	Comparing similar top-load models

Why it matters

Capacity affects how much laundry you can wash per load and how well the washer balances and spins. Overloading a large-capacity top-load washer can also increase vibration and wear on drive components.

If you are shopping for repair parts while you compare sizes, we stock common wear items for this model such as the agitator dog 80040 and the washer drain pump WP3363394. You can also search by model number on Sears PartsDirect.

Last updated: February 2026

Yes. Kenmore Elite is Kenmore’s higher-end line, and your Kenmore Elite washer model 11024952301 fits that premium tier with features aimed at stronger cleaning performance, better fabric care, and quieter operation (see the 11024952301 owner's manual).

What “high end” means for Kenmore Elite washers

Kenmore Elite models typically add capacity, cycle options, and comfort features compared to standard Kenmore washers.

Common “Elite” upgrades include:

• Larger capacity designs (often marketed as “King Size” capacity)
• More cycle and speed selections for fabric care
• Added rinse/soak options (such as 2nd rinse and auto soak)
• Noise and vibration reduction features
• More refined controls and finishes

Features called out for model 11024952301

Based on the manual content for this washer, the Elite positioning shows up in the feature set.

Highlights include:

• Multiple water level settings to help manage water use
• Multiple water temperature selections with automatic temperature control
• Options for rinse and soak settings
• Multiple speed settings for fabric care
• “Quiet Pak” style sound insulation and a unified balance system

Quick comparison: standard vs Elite (typical)

Feature area	Standard Kenmore (typical)	Kenmore Elite (typical)
Cycles and options	Basic set	Expanded set (more options)
Noise control	Basic	Enhanced insulation/balance
Capacity	Standard	Larger capacity offerings
Fabric care	Basic speeds/temps	More speed/temp combinations

Why it matters

A higher-end washer line usually means more ways to match water level, temperature, and spin/agitation to the load. That helps cleaning results, reduces wear on fabrics, and can cut down on noise and out-of-balance issues.

Keeping an Elite washer performing like one

If performance starts to slip (poor agitation, not spinning, not draining), these are common wear items we see on this design:

• Agitator dog 80040 (helps the agitator “grab” and move clothes)
• Washer motor coupling 285753A (connects motor to drive system)
• Washer drain pump WP3363394 (moves water out during drain/spin)

You can order replacement parts for model 11024952301 from the parts list for this washer, or search by model number on Sears PartsDirect.

Last updated: February 2026

To hard reset your Kenmore Elite washer model 11024952301, unplug it (or turn off the breaker) for about 1 minute to clear the control, then restore power and start a new cycle. This reset clears temporary glitches but does not change your cycle knob settings.

Hard reset steps (power reset)

• Turn the washer OFF.
• Unplug the power cord (or switch the laundry breaker OFF).
• Wait 60 seconds.
• Plug back in (or switch breaker ON).
• Lift and close the lid once, then select a cycle and press Start.

For control and cycle details specific to this washer, use the owner's manual.

If the washer still will not start after a reset

These checks solve the most common “dead” or “won’t run” symptoms on this style of Kenmore top-load washer:

• Confirm the outlet has power (test with a lamp).
• Make sure the lid is fully closed; the washer will not run if it does not sense a closed lid.
• If you hear no click when closing the lid, inspect the washer lid switch assembly WP8318084.
• If the motor hums but the basket does not move, inspect the washer motor coupling 285753A.
• If it drains slowly or not at all, check for a clog and inspect the washer drain pump WP3363394.

What a hard reset does (and does not do)

Action	What it affects	What it does not affect
Unplugging for 1 minute	Clears a stuck control state, cancels a paused cycle	Does not fix broken parts or wiring
Starting a fresh cycle	Re-initializes the timer sequence	Does not recalibrate water level or balance

Why it matters

A hard reset is the fastest way to clear a temporary control glitch after a power flicker or an interrupted cycle. If the problem returns, a lid switch, drain pump, or motor coupling issue is usually the next place we look on model 11024952301.

If you need to order replacement parts for your washer, use the parts list for model 11024952301 or search by model on Sears PartsDirect.

Last updated: February 2026

To unclog the drain hose on your Kenmore Elite washer model 11024952301, we recommend draining any standing water first, then clearing blockages from the external drain hose and the drain pump path. Most clogs are lint, coins, or small clothing items lodged at the pump inlet or hose bends.

Step-by-step: unclog the drain hose safely

• Unplug the washer (and turn off both water supply valves).
• Bail out water from the tub, or use a wet/dry shop vacuum on the standpipe or drain hose to pull water out.
• Pull the washer forward and inspect the drain hose for kinks, crushing, or a tight bend behind the cabinet.
• Remove the drain hose from the standpipe or laundry tub; flush it with hot water and push a small drain snake through to clear lint buildup.
• If the hose is clear but the washer still will not drain, check the drain pump for debris; the pump inlet is a common choke point.
• Reinstall the hose with a smooth, gradual curve and run a short rinse and spin cycle to confirm strong flow.

Where clogs usually hide (and what to check)

Location	What you might find	What to do
Standpipe or laundry tub drain	Slow household drain	Clear the home drain first so the washer can discharge properly
External drain hose bend	Lint mat, sock, small item	Straighten hose, flush, snake gently
Pump inlet/housing	Coins, hair pins, fabric	Remove obstruction; verify impeller turns freely
Tub-to-pump hose	Heavy lint, small garments	Clear blockage; check for internal collapse

Parts that commonly relate to “won’t drain” symptoms

If you find the pump is jammed, leaking, or noisy after clearing debris, replacement is often the fix. For this model, we stock the washer drain pump WP3363394. If the washer will not drain because it will not spin (lid switch issue), the washer lid switch assembly WP8318084 is also a common repair.

Why it matters

A restricted drain hose or pump makes the washer drain slowly or not at all, which can prevent spin, leave clothes soaking wet, and strain the motor coupling and drive system over time.

Helpful references and ordering

For model-specific access steps and operating details, use the owner's manual. You can order replacement parts for model 11024952301 from the parts list for this washer, or search by model on Sears PartsDirect.

Last updated: February 2026

Yes, repairing a Kenmore washer is worth it when the fix restores reliable washing and spinning for significantly less than replacing the machine. For Kenmore Elite model 11024952301, many common failures are caused by serviceable parts (pump, lid switch, coupling) that are straightforward to replace using the owner's manual.

When repair is the smart choice

We recommend repairing when the washer’s core structure is solid and the problem matches a common wear item.

• The washer fills and drains but will not spin or agitate (often a drive or coupling issue)
• The washer will not drain (commonly a pump or blockage)
• The washer will not start or stops when the lid opens (lid switch circuit)
• The tub is banging or walking (suspension components)
• You want to extend the life of a KING SIZE capacity top-load washer you already know and like

Quick cost-to-value guide (typical)

Use this as a practical rule: if the repair is a long-lasting fix and totals less than about half the cost of a comparable new washer, repair usually makes sense.

What you’re seeing	Common repair path	Parts cost range (typical)
Won’t drain	Replace drain pump, clear hoses	Low to moderate
Won’t spin/agitate	Replace motor coupling, clutch-related parts	Low to moderate
Won’t run with lid closed	Replace lid switch assembly	Low
Loud banging/out of balance	Replace suspension spring/pads, level washer	Low
Oil leak or grinding drive	Gear case related repair	High

Model 11024952301 parts that often make a repair worthwhile

These are common, high-impact fixes for top-load Kenmore designs like this one:

• Washer drain pump WP3363394 for no-drain or slow-drain symptoms
• Washer lid switch assembly WP8318084 for no-start or intermittent operation
• Washer motor coupling 285753A for no-agitate/no-spin with motor running
• Agitator dog 80040 for weak or slipping agitation

For ordering, use the parts list for model 11024952301, or search by model number on Sears PartsDirect.

Why it matters

A targeted repair restores cleaning performance, prevents repeat breakdowns (like overheating a motor when it cannot spin), and keeps a proven Kenmore platform running without the learning curve and fit changes of a new washer.

Last updated: February 2026