DeWalt DW734 TYPE 1 12-1/2" planer Parts

The Dewalt DW734 12-1/2" planer uses a three-knife cutter head, so it has 3 blades. Each blade has two sharpened edges, so you can rotate a blade once before replacing it (see the owner's manual).

A three-knife cutter head means three separate planer knives are installed in the cutter head at the same time.

• Blade count: 3 knives installed
• Edges per blade: 2 (reversible)
• Service option: rotate the knife to the second edge, then replace

Dull or nicked knives can cause poor planing results and performance issues.

• Feeding problems (slow feed or no feed)
• Motor overloading or frequent breaker trips
• Excessive tearout on the wood surface
• Nicks from knots or debris in the board

Keeping all three knives sharp and at the same height helps the DW734 cut smoothly, reduces snipe and tearout, and prevents extra strain on the motor and feed system.

Last updated: February 2026

The Dewalt DW734 12-1/2 inch portable thickness planer is used to plane rough lumber to a consistent thickness and create a smoother, more uniform surface on boards. It is designed for woodworking tasks like flattening stock and reducing board thickness in controlled passes (see the owner's manual).

• Reduce a board to a target thickness (for example, to match existing trim or panels)
• Clean up rough-sawn lumber by removing saw marks and minor surface defects
• Improve surface finish before sanding and final assembly
• Make multiple boards the same thickness for glue-ups and joinery
• Run repeatable passes for consistent results across a project

The DW734 is built for common shop lumber and hardwoods when you take appropriate depth-of-cut passes.

• Use proper eye and respiratory protection
• Keep hands clear of the cutterhead and feed area
• Unplug the planer before adjustments, cleaning, or changing accessories
• Avoid using the tool in damp locations

A thickness planer like the Dewalt DW734 helps you control final board thickness and improve surface quality, which directly affects fit, glue joints, and the finished look of your woodworking project.

Last updated: February 2026

The Dewalt DW734 is a 12-1/2 inch portable thickness planer built for jobsite-style use; it runs on 120V and draws 15A, with a 10,000 RPM no-load cutterhead speed. Its biggest strengths are portability and straightforward maintenance; its main tradeoffs are noise, chip control without a dust hood, and the limits of a smaller, portable planer.

• Portable size: Easier to move and store than stationary planers.
• Solid cutting performance for its class: 12-1/2 inch capacity fits many common boards.
• Standard household power: Runs on 120V AC and 15A, so it fits typical shop circuits.
• Serviceable wear items: Motor brushes are accessible for inspection and replacement.
• Accessory support: The manual lists a compatible dust hood, disposable reversible knives, and a mobile stand.

• Dust and chips: Without a dust hood and good collection, chips can build up fast.
• Noise and PPE needs: Planers are loud; eye and respiratory protection are important.
• Portable-planer limits: Narrower capacity and lighter mass than larger shop planers can mean more sensitivity to feed technique and setup.
• Maintenance expectations: Periodic cleaning and lubrication help keep the gear case and feed system working smoothly.

• Confirm your circuit is 120V, 15A and not heavily shared
• Use dust collection if possible (especially on resinous woods)
• Inspect/replace knives when you see tearout or ridges
• Check motor brushes if power seems inconsistent
• Follow the cleaning and lubrication guidance in the owner's manual

Most “pros vs. cons” on the DW734 come down to matching the tool to your workflow: portable thickness planers excel at convenience and solid results on typical stock, but they demand good chip control, sharp knives, and consistent setup to stay smooth and accurate.

Last updated: February 2026