Craftsman 917376653 lawn mower Parts

For a Craftsman lawn mower model 917376653, it’s cheaper to repair when the problem is a normal wear item (blade, belt, spark plug, air filter). Replacement makes more sense when a major system fails (engine or self-propel transmission) or when the repair total approaches about half the cost of a comparable new mower.

• Repair if the mower starts and runs well, and the issue is cutting quality, vibration, or routine maintenance
• Repair if the fix is a common wear part and you can do it safely at home
• Replace if the engine has low compression, heavy smoking, or repeated no-start after tune-up
• Replace if the self-propel drive is slipping even after belt and wheel-drive checks
• Replace if the deck is cracked or severely rusted through

These are common “repair first” items for model 917376653:

• Lawn mower 22-in deck mulching blade 532406713 for poor cut or uneven mowing
• Belt 532157769 when the self-propel drive slips or won’t engage
• Lawn mower transmission assembly 532415226 when internal drive components fail (higher-cost repair)

A well-maintained mower typically needs periodic service (spark plug, air filter, blade checks) to run correctly and protect the warranty coverage expectations. Our maintenance schedule and safety guidance for servicing sharp blades and inspecting fasteners is outlined in the 917376653 owner’s manual.

Last updated: January 2026

The model number for this Craftsman walk-behind lawn mower is 917.376653 (often written without the dot as 917376653). You’ll find it printed on the mower’s model label and it also appears on the cover of the 917376653 owner’s manual.

Check these common locations on Craftsman walk-behind mowers:

• On the rear of the deck near the bagger opening
• On the side of the deck near the discharge chute
• Near the engine mounting area on the deck
• On the handle bracket area (varies by production run)

The same mower can show the model number in two formats.

We use the exact model number to match the correct Craftsman parts diagrams and ensure you get the right replacement parts (for example, the correct blade, drive belt, or control cable). Using a close model number can lead to parts that do not fit.

• Blade and blade mounting hardware
• Drive system parts (belt, transmission components)
• Handle and control parts (control bar, engine zone control cable)

Last updated: January 2026

On the Craftsman walk-behind mower model 917376653, the mower’s model number is printed in the owner documentation and is also typically found on a model/serial tag on the mower deck or rear housing area. For the exact tag location and identification details, use the 917376653 owner's manual.

Check these common spots first (clean off grass and dirt so the tag is readable):

• Top of the mower deck near the engine mounting area
• Rear of the deck near the bagger door or discharge opening
• Side of the deck near a rear wheel height adjuster
• Handle support/bracket area near the lower handle mounts
• Under the rear flap or near the grass bag frame attachment points

Many owners find an engine model number and assume it is the mower model. They are different identifiers.

Using the correct model number keeps you from ordering the wrong blade, belt, or drive parts. For example, this model uses a 22-inch deck blade such as the lawn mower 22-in deck mulching blade 532406713, and the correct match depends on the mower model and deck configuration.

• Write down the full model number exactly as shown (including dots or dashes if present)
• Take a clear photo of the tag before it wears further
• If the tag is damaged, compare your mower’s handle/deck style to the diagrams in the manual

Last updated: January 2026