Kenmore 1069750614 refrigerator Parts

Yes. You can still get replacement parts for Kenmore refrigerators, including the Kenmore 1069750614 top-mount refrigerator. We list model-specific parts such as defrost components, door gaskets, thermostats, and water system parts so you can match the right part to your exact model.

Use your model number (1069750614) to match parts by fit and function, then confirm the part description before ordering.

• Match the part to the symptom (cooling issue, leak, frost buildup, light not working)
• Compare the part name and part ID to what is installed
• Check whether you need a refrigerator-side or freezer-side part (gaskets differ)
• Replace common wear items first (gaskets, switches, valves)
• If you are troubleshooting, test before replacing sealed-system parts

These are examples of parts available for this model that often solve everyday problems:

Kenmore refrigerators are built with serviceable components, so replacing the correct part can restore proper temperatures, reduce frost and leaks, and prevent food spoilage without replacing the entire refrigerator.

If your model shows an error code or you are diagnosing a cooling problem, use our troubleshooting steps to narrow the cause before ordering parts: Kenmore 106 model refrigerator error codes.

Last updated: February 2026

For Kenmore model 1069750614, the model number is used to match the correct specs and parts, but it typically does not display the exact cubic-foot capacity by itself. The most reliable method is measuring the usable interior space and calculating cubic feet.

Measure the refrigerator and freezer compartments separately, then add them.

• Measure width, height, and depth (in inches) of the open interior box
• Multiply each section: W x H x D to get cubic inches
• Convert: cubic inches ÷ 1728 = cubic feet
• Add refrigerator + freezer totals

Most Kenmore top-mount refrigerators like this are about 18 to 22 cu. ft.; your exact capacity depends on the cabinet and liner design.

Capacity is helpful for comparing storage, but model-accurate identification is what prevents fit issues when ordering parts.

• Door seals must match the door size exactly
• Temperature controls vary by design
• Defrost components can differ by configuration

If you are troubleshooting cooling or warm temperatures while you are checking specs, a common related part is the refrigerator defrost timer W10822278.

Last updated: February 2026

Your Kenmore refrigerator model number is printed on the appliance’s rating label; once you find it, you can match parts and diagrams to the exact unit (for this page, the model is 1069750614). On most top-mount Kenmore refrigerators, the label is inside the fresh food compartment or near the door opening.

Check these common spots first:

• Inside the refrigerator section on the left or right side wall
• On the ceiling of the fresh food compartment (near the light)
• Behind or under the crisper pan area (remove the crisper to look)
• Along the door frame (open the refrigerator door and inspect the perimeter)
• Near the bottom front (kick plate area) on some designs

Record the information exactly as shown on the label:

• Model number (example: 1069750614)
• Serial number (helps identify production run and compatible revisions)
• Any suffix letters/numbers after the model number (they can change part fit)

Kenmore model numbers often look similar, but small differences can change which door gasket, thermostat, or defrost parts fit. Using the exact model number helps us point you to the correct replacement parts and troubleshooting info.

If you are diagnosing a symptom, the model number helps confirm the right component to check or replace:

Use these practical workarounds:

• Look for a duplicate label on the cabinet frame near the hinge side
• Check any purchase paperwork or service receipt that lists the model
• Compare your shelves, crisper pans, and door bins to the parts diagrams for 1069750614 to confirm a match

For Kenmore 106-prefix refrigerators, we also use model-based troubleshooting references like Kenmore 106 model refrigerator error codes when your unit has a display or diagnostic mode.

Last updated: February 2026

Kenmore refrigerators typically last 12 to 15 years on average. With consistent care (clean condenser coils, good door seals, correct temperatures), many units run longer; when major sealed-system parts fail, repair costs often rise quickly.

A Kenmore top-mount like model 1069750614 usually lands in the same 12 to 15 year range, with lifespan driven more by maintenance and operating conditions than by the cabinet style.

• Longer life: clean condenser area, stable room temperature, doors closing tightly
• Shorter life: clogged coils, torn gaskets, frequent door openings, overpacked freezer blocking airflow
• High-impact wear items: door gaskets, thermostats, defrost components, fan motors

Use this list to extend life and reduce breakdowns.

• Vacuum dust from the condenser area regularly
• Keep refrigerator at 37°F and freezer at 0°F (typical targets)
• Confirm doors close on their own and seal all the way around
• Avoid blocking air vents with food packages
• Defrost and drain issues: clear ice buildup and keep the drain path open

If your refrigerator is warm, frosting up, or running constantly, these model-matched parts are common suspects.

Once a refrigerator gets past the 12 to 15 year mark, small efficiency losses (dirty coils, air leaks at the gasket, defrost problems) can add up to higher run time, warmer temps, and more stress on the compressor.

Last updated: February 2026