Kenmore 11016512692 washer Parts

To identify your Kenmore washer model, we look for the model number tag on the machine itself. For Kenmore model 11016512692, the tag is typically under the lid on top-load washers or on the back panel near the power cord or control console.

Where to find the model number tag

Check these common locations first (use a flashlight and wipe dust off the label):

• Under the lid: along the rim of the tub opening or underside of the lid (common on top-loaders)
• Back of the washer: near the power cord entry or rear panel edge
• Behind the control panel: sometimes on the cabinet frame behind the console
• Inside the cabinet opening: around the top frame where the lid closes

What the model number looks like (Kenmore)

Many Kenmore washers use a model format that starts with 110 followed by additional digits. Your full model number should match exactly, including all digits.

What to capture	Example for this washer	Why it matters
Model number	11016512692	Ensures diagrams and parts match your exact build
Serial number	(varies)	Helps confirm production run when parts changed
Type	Top-load washer	Narrows troubleshooting and part style

Tips to avoid ordering the wrong part

Once you find the tag, match the model number exactly before choosing parts like a lid switch, drain pump, or motor coupling.

• Write the model number down exactly as printed
• Take a clear photo of the label for reference
• Match every digit; one digit off can change the correct part
• Use the model number when selecting common repairs such as a washer lid switch WP3949238

Why it matters

Kenmore washers often have multiple versions that look similar, but use different drive systems, switches, and pumps. Using the exact model number (like 11016512692) helps us point you to the correct Kenmore washer parts the first time.

Last updated: February 2026

Yes, repairing a Kenmore washer is worth it when the machine is otherwise in good shape and the fix targets a common wear part; for Kenmore model 11016512692, many repairs (like a lid switch, drain pump, or motor coupling) restore reliable washing for far less than replacing the washer.

A practical way to decide

Use this quick checklist before you spend money:

• Compare cost: if parts plus labor are well under the price of a comparable new washer, repair makes sense.
• Match the symptom to a likely part: no spin, no drain, or no agitation often points to a specific component.
• Check for leaks or rust: heavy cabinet rust or a badly leaking tub usually pushes the decision toward replacement.
• Consider downtime: if you need a fast fix, choose the most likely failure first.
• Think long-term: replacing a wear part is usually a long-lasting fix; replacing multiple major drive components at once can add up.

Common repairs on this style of Kenmore top-load washer

These are frequent, cost-effective fixes on direct-drive Kenmore 110-style washers:

Symptom	Common cause	Example part for model 11016512692
Won’t spin or start	Lid switch not closing circuit	Washer lid switch WP3949238
Won’t drain	Pump jammed or worn	Washer drain pump WP3363394
Agitates poorly or “slips”	Worn drive coupling	Coupling 285753A
Agitator “ratchets” or won’t move clothes well	Worn agitator dogs	Agitator dog 80040

Why it matters

A targeted repair keeps a proven Kenmore design running, avoids the learning curve of a new machine, and often solves the exact complaint (no drain, no spin, weak agitation) with one part instead of replacing the whole washer.

Last updated: February 2026

A Kenmore washer typically lasts 10 to 15 years with normal household use; for the Kenmore 11016512692 washer, staying within that range depends most on load size, proper draining, and keeping the drive system and lid safety circuit working correctly.

What affects washer lifespan the most

• Overloading (stresses the drive motor, clutch, and gear case)
• Poor draining (standing water accelerates corrosion and odor issues)
• Out-of-balance loads (wears suspension and can damage the tub system)
• Lid switch problems (can stop spin cycles and lead to repeated restarts)
• Leaks (can damage bearings, seals, and nearby electrical components)

Quick maintenance habits that add years

• Keep loads evenly distributed; wash bulky items in smaller batches.
• Use the right detergent amount; excess suds can cause longer run times and strain.
• Check hoses and the tub area for small leaks and address them early.
• If the washer hesitates to spin, test the lid switch circuit and replace the safety switch if needed.
• If draining slows, inspect the pump and hoses for lint, coins, or small socks.

Common wear items and what they usually cause

Symptom	Common cause in this style of Kenmore washer	Example part to check
Won’t spin or stops mid-cycle	Lid safety circuit not closing	Washer lid switch WP3949238
Won’t drain or drains slowly	Pump jammed or worn	Washer drain pump WP3363394
Agitator slips or “ratchets”	Worn agitator dogs/cam	Agitator dog 80040
Loud grinding or poor agitation/spin	Drive coupling or gear case wear	Coupling 285753A

Why it matters

A washer that is maintained and repaired early usually reaches the upper end of the 10 to 15 year range because small issues (like a weak drain pump or worn coupling) do not get the chance to cascade into bigger failures such as gear case damage or seal leaks.

Last updated: February 2026