Kenmore 10656242400 side-by-side refrigerator Parts

For Kenmore side-by-side refrigerator model 10656242400, the correct filter is identified in the replacement parts section of the 10656242400 owner's manual. That manual calls out Part #9020 for the base grille water filter cartridge; on Sears PartsDirect, the matching orderable filter is genuine Kenmore refrigerator water filter EDR3RXD1.

Fast ways to confirm you are buying the right filter

• Match your refrigerator model number exactly: 10656242400.
• Check the filter location; this model uses a base grille style cartridge.
• Use the manual’s replacement filter reference: 9020.
• Cross-reference to the orderable part ID used online: EDR3RXD1.
• Replace the cartridge if dispenser flow slows; a clogged filter restricts water and ice output.

What to match: manual number vs. orderable part ID

Where you check	What you will see	What it’s used for	What to buy for 10656242400
10656242400 owner's manual	9020	Kenmore replacement filter reference	Filter referenced as 9020
Parts listing	EDR3RXD1	Ordering part ID	EDR3RXD1

Why it matters

Using the correct cartridge keeps filtration performance consistent and helps prevent weak dispensing, slow ice production, and leaks caused by an incorrect fit.

If you want a step-by-step replacement walkthrough

Use the instructions in the 10656242400 owner's manual, or follow the general guide how to replace the water filter in a Kenmore refrigerator.

Last updated: February 2026

Kenmore model numbers tell us who built the appliance and which design family it belongs to. On your Kenmore side-by-side refrigerator model 10656242400, the first three digits (106) identify the manufacturer group, and the remaining digits narrow down the exact series and configuration; we use the full model number to match the correct parts and manual.

Where to find the model number on a refrigerator

Most Kenmore side-by-side refrigerators list the model and serial on a rating label. Common locations include:

• Inside the fresh food compartment on a side wall
• On the ceiling of the fresh food compartment near the light
• Behind the crisper drawers
• Along the door frame (hinge side)
• On the back of the cabinet near the lower area

For diagrams and label locations specific to this unit, use the 10656242400 owner's manual.

How to interpret the digits (quick guide)

Kenmore model numbers are typically structured like this:

Section	Example	What it tells us
Prefix (first 3 digits)	106	Manufacturer group code used for parts lookup
Base model digits	562424	Design family and feature set
Suffix digits	00	Revision, color, or production variation

Why the full model number matters for parts

Even small digit changes can mean different shelves, door bins, ice maker styles, or water filter housings. When ordering, we match parts to the complete model number to avoid fit issues.

• Water filter style and cap design can vary by series
• Ice maker assemblies can differ by wiring and mounting
• Door cams and gaskets can change by revision
• Shelves and pans can change by interior layout

If you are replacing the filter on this model, the manual calls out the base grille water filter cartridge as part #9020; a current replacement option is the genuine Kenmore refrigerator water filter EDR3RXD1.

Why it matters

Reading the model number correctly is the fastest way to get the right Kenmore 10656242400 refrigerator parts the first time, especially for water system and door hardware components.

Last updated: February 2026

Most Kenmore side-by-side refrigerators are about 33 to 36 inches wide; your Kenmore 10656242400 is in that common size range. For the exact cabinet width and required clearance for door swing, we recommend checking the dimensions section in the 10656242400 owner's manual.

Typical width and what to plan for

When you are measuring for a replacement or a tight kitchen opening, we plan for both the cabinet width and the extra space needed for ventilation and door swing.

• Typical side-by-side cabinet width: 33 to 36 in.
• Typical height: 65 to 71 in. (varies by style and hinge design)
• Typical depth: 30 to 34 in. without handles (counter-depth models are shallower)
• Add clearance for airflow: about 1/2 in. on each side and at the top
• Add clearance for door swing near a wall: at least 2 in. on the wall side (model-dependent)

Quick measuring checklist (best results)

Measure in three places because walls and cabinets are rarely perfectly square.

• Opening width at the top, middle, and bottom
• Depth from the back wall to the front of cabinets, then compare to fridge depth plus handles
• Height from floor to the lowest cabinet/soffit
• Clearance for the water line behind the unit if it has an ice maker

Clearance planning table

What you are measuring	What to use	Why
Cabinet width	33 to 36 in. typical	Confirms the refrigerator will physically fit
Side/top ventilation	About 1/2 in. each side and top	Helps cooling performance and efficiency
Wall-side door swing	At least 2 in. minimum	Prevents doors from hitting the wall and improves access

Why it matters

If the opening is too tight, doors may not open fully, bins can hit walls, and airflow can be restricted. That can lead to warmer temps, longer run times, and more wear on the sealed system.

Last updated: February 2026

Kenmore side-by-side refrigerator model 10656242400 has a total capacity of 21.9 cu. ft. That number is the combined interior volume of the fresh food and freezer sections; your usable storage space varies with shelves, bins, and the ice maker setup.

What “21.9 cu. ft.” means in real use

Capacity is a standardized volume measurement, but the space you actually use depends on how the refrigerator is equipped.

• An installed ice maker and ice bin reduce freezer shelf space
• Door bins and crisper drawers change how bulky items fit
• Adjustable shelves affect tall-item storage
• Airflow clearance around vents reduces “pack it full” space
• Food packaging shapes can waste space even in a large cavity

Quick capacity reference

Spec	What it represents	What changes day to day
Total capacity (cu. ft.)	Combined interior volume	Does not change
Usable storage	Practical space for food	Shelves, bins, ice maker, organization
Freezer vs fresh food split	How the total is divided	Drawer and bin configuration

Where to confirm specs and features for your exact configuration

Your 10656242400 owner's manual is the best place to match capacity with your specific features (ice maker, shelf layout, and storage options) and to see any model-specific notes.

Related tip for dispenser models

If your refrigerator uses a base grille water filter, keeping it current helps maintain water flow and ice production. A common replacement for this model family is the refrigerator water filter EDR3RXD1.

Why it matters

Knowing the cubic-foot capacity helps you compare replacement refrigerators accurately and set expectations for how much food you can store once drawers, door bins, and the ice maker are in place.

Last updated: February 2026

Most Kenmore refrigerators average 10 to 15 years of service life. For a Kenmore 10656242400 side-by-side refrigerator, you can reach the high end of that range by keeping airflow strong (clean condenser coils), maintaining tight door seals, and fixing cooling or defrost issues quickly using the 10656242400 owner's manual.

Typical lifespan ranges (what we see most often)

These ranges reflect normal household use, proper installation, and routine maintenance.

• 10 to 15 years: typical Kenmore refrigerator lifespan
• 15 to 20 years: common when coils are kept clean and door gaskets seal well
• Under 10 years: more likely when coils are clogged, doors do not seal, or the unit runs hot in a tight enclosure

Condition	What it usually leads to	What to do
Clean coils, good ventilation	Longer compressor life	Vacuum coils and keep rear clearance
Doors sealing tightly	Stable temps, less run time	Clean and inspect gaskets
Frost buildup on evaporator cover	Warm fridge, heavy run time	Check defrost system components
Frequent dispenser/ice issues	Leaks, clogs, low ice	Replace filter and verify water supply

Maintenance that extends life the most

• Clean condenser coils and the toe grille area regularly (dust makes the compressor work harder).
• Keep door gaskets clean so doors close easily and seal fully (sticky gaskets can make doors hard to open and can also leak air).
• Set temperatures to normal targets: 37°F fresh food and 0°F freezer.
• Replace the water filter on schedule to protect water flow and reduce dispenser strain.
• Address unusual noises, warming, or heavy frost early to prevent sealed-system overwork.

Parts that commonly affect longevity

If performance drops, these are frequent culprits on side-by-side designs:

• Water filtration: genuine Kenmore refrigerator water filter EDR3RXD1
• Defrost protection: refrigerator defrost bi-metal WPW10225581
• Ice production: refrigerator ice maker WPW10190961

Why it matters

A refrigerator that runs longer than it should (from dirty coils, air leaks, or frost blockage) puts extra load on the compressor and sealed refrigeration system. Reducing run time is the most direct way to extend overall lifespan.

Last updated: February 2026

On Kenmore side-by-side refrigerator model 10656242400, the model number is printed on the model and serial number label located on the inside wall of the refrigerator (fresh food) compartment. Use that label to record both the model number and serial number for parts and service.

How to find it quickly

• Open the refrigerator (fresh food) door, not the freezer door
• Look along the inside walls of the fresh food compartment
• Check near the crisper area and side walls where labels are commonly placed
• Use a flashlight; labels can be easy to miss in low light
• Write down both the model number and serial number exactly as shown

What you will see on the label

The label typically includes both identifiers you need for ordering Kenmore refrigerator parts.

Item on label	What it’s used for	Example format
Model number	Matching parts to your exact refrigerator	10656242400
Serial number	Identifying production details for service	Letters and numbers

Why it matters

We use the model number to ensure parts like a refrigerator water filter, ice maker, or door bin match your exact Kenmore configuration. Even small model variations can change which parts fit.

Helpful next step

If you’re ordering a filter for this model, confirm the filter type listed for your refrigerator in the 10656242400 owner’s manual.

Last updated: February 2026

Kenmore model 10656242400 is a Kenmore-branded side-by-side refrigerator that was manufactured for Sears by a major appliance OEM; the 106 model prefix is commonly associated with Whirlpool-built Kenmore refrigerators. For model-specific identification details, we use the information in the 10656242400 owner's manual.

How to confirm who built your exact unit

Use these quick checks on your refrigerator:

• Look for the model and serial label inside the fresh food compartment (typically on an inside wall).
• Match the full model number exactly: 10656242400.
• Note the serial number; it can help date the unit and confirm production details.
• Compare the label information to the documentation in the 10656242400 owner's manual.
• If you are ordering maintenance items, match parts by model (for example, the water filter cartridge listed for this model).

What the “106” prefix usually means

Kenmore model numbers often use a prefix that points to the original manufacturer.

What you see	What it typically indicates	Why it helps
Kenmore model starts with 106	Whirlpool-built platform	Parts, layouts, and service procedures often align with Whirlpool designs
Kenmore branding on the door	Sold and supported under Kenmore	Use Kenmore model number for parts lookup

Parts clue that supports the platform

This model’s manual calls out a base grille water filter cartridge order number 9020, which aligns with the replacement filter we list as genuine Kenmore refrigerator water filter EDR3RXD1. Using the correct filter and cap fitment helps protect the water system and ice maker.

Why it matters

Knowing the build platform helps you choose the right repair approach and compatible parts (water filter, ice maker, inlet valve, door hardware). For ordering and troubleshooting, the model number and serial label are the most reliable identifiers.

Last updated: February 2026

If the ice maker on your Kenmore 10656242400 side-by-side refrigerator isn’t making ice, the most common causes are the ice maker being turned OFF, the freezer not being cold enough yet, or a water supply issue (shutoff valve closed, kinked line, or a clogged filter). Use the steps below to pinpoint the failure quickly using the 10656242400 owner's manual.

Quick checks that fix most “no ice” complaints

• Wait long enough after setup: allow 24 hours for the first ice after hookup, and up to 72 hours for full production.
• Confirm the ice maker is ON: lower the wire shutoff arm (arm down) or switch the ice maker to ON (model dependent).
• Verify freezer temperature: ice production drops fast if the freezer is too warm; recheck after 24 hours of stable settings.
• Make sure the water valve is ON: confirm the household shutoff valve feeding the refrigerator is fully open.
• Check for a jam: remove any cube stuck in the ejector area using a plastic utensil.
• Inspect the water filter: a clogged or incorrectly installed filter can stop water flow; replace if overdue.

Water supply and filter: what to look for

A weak or blocked water supply is a top cause of ice maker failure. If the dispenser water flow is slow, the ice maker usually suffers too.

Symptom	Most likely cause	What we do next
No ice, mold is dry	Water supply shut off or restricted	Open shutoff valve; check for kinks; confirm pressure
Small cubes or slow production	Filter restriction	Replace the filter and purge air
Ice maker cycles but no fill	Inlet valve not opening	Test/replace the inlet valve

If you suspect the filter is the restriction, replace it with the correct cartridge for this model, then flush several glasses of water and discard the first batches of ice. A compatible option is the genuine Kenmore refrigerator water filter EDR3RXD1.

Why it matters

The ice maker depends on two things: cold enough freezer temps and steady water flow. If either one is marginal, you’ll see no ice, slow ice production, hollow cubes, or frequent jams.

Helpful DIY guidance

For step-by-step filter selection and replacement tips, we recommend how to replace the water filter in a Kenmore refrigerator.

Last updated: February 2026