Installation guide
Owner’s manual
Error Codes
Where can I find my Frigidaire dryer model number?
On your Frigidaire electric dryer model FAQE7077KW0, the model number is printed on the dryer serial plate located at the top of the door opening. We recommend writing down both the model and serial number before ordering parts or scheduling service; see the FAQE7077KW0 owner's manual.
How to locate the model number quickly
- Open the dryer door fully.
- Look along the top edge of the door opening (the front frame area).
- Find the serial plate (a label with model and serial information).
- Record the model number and serial number exactly as shown.
- Keep the information with your purchase records for future reference.
What you will see on the serial plate
Most Frigidaire dryer serial plates include these fields:
| Label item | What it’s used for |
|---|---|
| Model number | Matching the correct parts diagrams and replacement parts |
| Serial number | Identifying the production series for service and compatibility |
| Purchase date (your record) | Warranty and maintenance tracking |
Why it matters
Using the exact model number helps us match the right Frigidaire parts for your dryer, such as a drum belt, door switch, thermal limiter, or terminal block. Even small model variations can change which components fit.
Last updated: February 2026
Can I look up Frigidaire parts by model number?
Yes. For your Frigidaire electric dryer model FAQE7077KW0, looking up parts by the full model number is the most accurate way to match compatible replacement parts because it ties the search to your exact configuration and parts list.
Where to find the model number on the dryer
On FAQE7077KW0, the model and serial numbers are on the serial plate at the top of the door opening. Confirm the full model number before ordering.
- Open the dryer door and look along the top edge of the opening
- Write down the model number and serial number exactly as shown
- Use the full model number (not a partial) when searching
- Keep the information with your paperwork for future repairs
How we recommend searching for parts
Once you have FAQE7077KW0, use it to narrow results to the correct diagrams and part listings, then match by part name and part ID.
| What you have | What it helps you do | Best for |
|---|---|---|
| Model number (FAQE7077KW0) | Filters to the correct parts breakdown | Compatibility |
| Part name | Confirms the function of the part | Avoiding wrong items |
| Part ID / part number | Identifies the exact replacement | Ordering |
Common examples for this model
If you are troubleshooting noise, no tumble, or door issues, these are examples of model-matched parts you may see listed for FAQE7077KW0:
- White-westinghouse dryer drum belt 134719300 (drum not turning, squeal, belt damage)
- Dryer drum support roller 5304523152 (thumping, rumbling, worn roller)
- Drive drum switch 134813601 (door switch symptoms, dryer will not run)
Why it matters
Dryers often have multiple versions that look similar but use different belts, thermostats, switches, or wiring. Using the exact model number from the door opening helps prevent ordering a part that does not fit or connect correctly.
For model-specific identification details and safe-use guidance, reference the FAQE7077KW0 owner’s manual.
Last updated: February 2026
How much does it cost to replace a heating element in a Frigidaire dryer?
For a Frigidaire electric dryer like model FAQE7077KW0, the total cost to replace a heating element is usually $200 to $450: roughly $120 to $250 for the part plus $80 to $200 for labor. If you DIY, you typically pay for the part only.
What changes the price the most
- Service call minimums (often 30 to 60 minutes billed even for a quick repair)
- Whether the heater is sold as an assembly (more common) vs. element-only
- Vent restriction damage (a clogged vent can overheat and take out thermostats or a thermal limiter)
- Access time (stacked install, tight closet, long vent run)
- Extra parts needed (thermal limiter, high-limit thermostat, wiring terminals)
Quick checks before you buy parts
A dryer can tumble but not heat for reasons other than a bad element. We recommend these checks first:
- Confirm the dryer has full 240V power (many electric dryers run on one leg but will not heat)
- Check the lint screen and venting for blockage (overheating can trip a limiter)
- Look for a tripped thermal limiter (common after airflow problems)
- Review the no-heat troubleshooting steps in the FAQE7077KW0 owner's manual
Common “no heat” parts on this model
If your diagnosis points away from the element, these model-related parts are often involved:
| Symptom | Common cause | Example part to check |
|---|---|---|
| Tumbles, no heat | Thermal limiter open | Dryer inlet thermal limiter 137032600 |
| Overheats, shuts heat off | High-limit thermostat open | Dryer high-limit thermostat 3204267 |
| Erratic temps, long dry times | Temperature sensor issue | Dryer thermistor 134587700 |
Why it matters
Replacing the heating element without fixing airflow can lead to repeat failures. A clean lint path and properly installed venting help the heater, thermostats, and thermal limiter last longer; see the installation guide for venting and safety requirements.
Last updated: February 2026
Why is my Frigidaire dryer not drying clothes?
On the Frigidaire FAQE7077KW0 electric dryer, the most common reason clothes stay damp is restricted airflow from the lint screen, exhaust duct, or outside vent hood. A crushed or incorrect vent (plastic or foil) can dramatically increase drying time even when the lint filter looks clean.
Quick checks that fix most “not drying” complaints
- Clean the lint screen before or after every load (wash off fabric-softener residue if present).
- Inspect the vent hose behind the dryer; straighten kinks and replace any crushed sections.
- Confirm you are using 4-inch rigid or flexible metal ducting (not plastic or foil). See the installation guide.
- Go outside and verify the vent hood damper opens fully while the dryer runs; clear lint around the opening.
- Avoid blocking airflow at the front or back of the dryer (do not stack rugs or laundry against it).
Airflow and venting requirements (what “good” looks like)
Your dryer is designed to vent outdoors; poor venting causes long dry times and overheating.
| Item to check | What you want | What causes slow drying |
|---|---|---|
| Duct type | 4-inch metal duct | Plastic or foil ducting, crushed flex duct |
| Outside hood | Damper swings open | Damper stuck, lint buildup, blocked hood |
| Clearance | Hood at least 12 inches above ground/obstructions | Hood too close to ground, snow, mulch, debris |
When airflow is good but drying is still poor
If the drum turns normally and airflow is strong, a heating or temperature-sensing issue is likely. Common suspects include:
- High-limit thermostat (overheating protection)
- Inlet thermal limiter (one-time safety device)
- Thermistor (temperature sensor)
For model-matched parts, we commonly see fixes using the dryer inlet thermal limiter 137032600 or the dryer thermistor 134587700 when symptoms point to heat control problems.
Why it matters
Restricted venting does not just slow drying; it can overheat the dryer and create unsafe operating conditions. Keeping the lint screen, exhaust duct, and outdoor hood clear restores performance and helps protect internal components.
Last updated: February 2026
