Get free shipping on your order, with any water filter subscription. Find my filter

Open Hamburger Menu
Sears Parts Direct
Tips to find your model number
Maytag MHWZ400TQ02 washer

Maytag MHWZ400TQ02 washer Parts

Here are the diagrams and repair parts for Maytag MHWZ400TQ02 washer, as well as links to manuals and error code tables, if available.

By Schematic
By Part
SELECT DIAGRAM
?

This is the number corresponding to the part on the diagram / schematic

Browse Parts for MHWZ400TQ02 Washer

  • Washer Leveling Leg Lock Nut for Maytag MHWZ400TQ02 - Part WP3359452

    Top and cabinet parts diagram

    Washer Leveling Leg Locking Nut

    Part #3359452

    Replaced by #WP3359452

    Info Icon
    Manufacturer substitution
    This part replaces 3359452. Substitute parts can look different from the original.
    This item is not returnable
    In Stock
    $4.60
    18% OFF Phone Price : $5.60Info Icon
    Minus Item
    Qty
    Plus Item
  • Washer Motor Control Board for Maytag MHWZ400TQ02 - Part WPW10384843

    Top and cabinet parts diagram

    Washer Electronic Control Board

    Part #W10205342

    Replaced by #WPW10384843

    Info Icon
    Manufacturer substitution
    This part replaces W10205342. Substitute parts can look different from the original.
    In Stock
    $274.68
    $12.00 OFF Phone Price : $286.68Info Icon
    Minus Item
    Qty
    Plus Item
  • Washer Drain Hose Extension, 4-ft for Maytag MHWZ400TQ02 - Part 285863

    Tub and basket parts, optional parts (not included) diagram

    Washer Drain Hose Extension, 4-ft

    Part #285863
    This item is not returnable
    In Stock
    $26.16
    19% OFF Phone Price : $32.16Info Icon
    Minus Item
    Qty
    Plus Item
  • Washer Noise Filter for Maytag MHWZ400TQ02 - Part WPW10367632

    Top and cabinet parts diagram

    Filter

    Part #8540230

    Replaced by #WPW10367632

    Info Icon
    Manufacturer substitution
    This part replaces 8540230. Substitute parts can look different from the original.
    In Stock
    $55.14
    10% OFF Phone Price : $61.14Info Icon
    Minus Item
    Qty
    Plus Item
  • Washer Hose Clamp for Maytag MHWZ400TQ02 - Part WP696392

    Pump and motor parts diagram

    Clamp

    Part #8540008

    Replaced by #WP696392

    Info Icon
    Manufacturer substitution
    This part replaces 8540008. Substitute parts can look different from the original.
    This item is not returnable
    In Stock
    $7.00
    13% OFF Phone Price : $8.00Info Icon
    Minus Item
    Qty
    Plus Item
  • Washer Dispenser Connection Lever for Maytag MHWZ400TQ02 - Part WP8540395

    Dispenser parts diagram

    Washer Dispenser Connection Lever

    Part #8540395

    Replaced by #WP8540395

    Info Icon
    Manufacturer substitution
    This part replaces 8540395. Substitute parts can look different from the original.
    This item is not returnable
    In Stock
    $7.21
    12% OFF Phone Price : $8.21Info Icon
    Minus Item
    Qty
    Plus Item
  • Washer Suspension Spring Set for Maytag MHWZ400TQ02 - Part 280159

    Tub and basket parts, optional parts (not included) diagram

    Spring

    Part #W10010360

    Replaced by #280159

    Info Icon
    Manufacturer substitution
    This part replaces W10010360. Substitute parts can look different from the original.
    In Stock
    $50.60
    11% OFF Phone Price : $56.60Info Icon
    Minus Item
    Qty
    Plus Item
  • Washer Thermistor Gasket for Maytag MHWZ400TQ02 - Part WP8540766

    Tub and basket parts, optional parts (not included) diagram

    Washer Thermistor Gasket

    Part #8540766

    Replaced by #WP8540766

    Info Icon
    Manufacturer substitution
    This part replaces 8540766. Substitute parts can look different from the original.
    This item is not returnable
    In Stock
    $20.49
    23% OFF Phone Price : $26.49Info Icon
    Minus Item
    Qty
    Plus Item
  • Washer Water Distribution Lever for Maytag MHWZ400TQ02 - Part WP8540394

    Dispenser parts diagram

    Washer Water Distribution Lever

    Part #8540394

    Replaced by #WP8540394

    Info Icon
    Manufacturer substitution
    This part replaces 8540394. Substitute parts can look different from the original.
    This item is not returnable
    In Stock
    $7.21
    12% OFF Phone Price : $8.21Info Icon
    Minus Item
    Qty
    Plus Item
  • Washer Dispenser Actuator Cam for Maytag MHWZ400TQ02 - Part WP8540393

    Dispenser parts diagram

    Cam

    Part #8540393

    Replaced by #WP8540393

    Info Icon
    Manufacturer substitution
    This part replaces 8540393. Substitute parts can look different from the original.
    This item is not returnable
    In Stock
    $7.21
    12% OFF Phone Price : $8.21Info Icon
    Minus Item
    Qty
    Plus Item

Maytag Washer MHWZ400TQ02 FAQs

Maytag washers typically last 10 to 13 years in normal household use. For your Maytag MHWZ400TQ02 washer, lifespan depends most on load size, cycle frequency, and routine care outlined in the MHWZ400TQ02 owner's manual.

Typical lifespan and what affects it

Most washer failures that end a machine’s service life come from wear items (drain system, door seal, bearings, controls) rather than the cabinet itself.

  • Usage level: multiple loads per day shortens life faster than a few loads per week
  • Overloading: strains the drive system and tub support
  • Water quality: hard water increases detergent residue and buildup
  • Drain habits: coins, hair pins, and lint stress the pump and trap
  • Maintenance: cleaning and leaving the door ajar reduces odor and seal damage

What “end of life” usually looks like

Here are common symptoms that show a washer is nearing the end of its practical life, plus the parts that often solve them first:

Symptom Common cause Example part for MHWZ400TQ02
Won’t drain or drains slowly Pump worn or clogged Washer drain pump assembly WPW10730972
Leaks at the door Door boot torn or clamp loose Washer door boot WPW10111435
Door won’t latch/lock Strike worn or lock failing Washer door strike WP8540221

How to extend the life of your MHWZ400TQ02

These steps prevent the most common wear and odor issues in front-load washers:

  • Use HE detergent and avoid over-dosing
  • Run a monthly cleaning cycle (or hot cycle) to reduce residue
  • Check pockets to keep debris out of the drain system
  • Keep the door slightly open between loads to dry the boot
  • Inspect hoses periodically; replace if bulging, cracking, or leaking

Why it matters

A washer that is maintained and repaired early (especially leaks and draining problems) typically avoids secondary damage to the motor, control board, and tub components, which are the higher-cost repairs.

Last updated: February 2026

Yes. For the Maytag MHWZ400TQ02 washer, replacement parts are straightforward to get because you can match parts by model number and order common repairs (like a drain pump or door boot) directly from the parts list, then follow the MHWZ400TQ02 owner's manual for correct use and maintenance.

What makes parts “easy to get” for this washer

We consider parts easy to get when you can quickly identify the correct part and it is commonly stocked.

  • Use the exact model number MHWZ400TQ02 when searching parts
  • Match by symptom (won’t drain, leaking at door, won’t lock) to narrow the part
  • Choose factory-specified replacements for best fit and performance
  • Keep your model and serial number handy when confirming compatibility
  • Order from the parts list on this page, or search by model on Sears PartsDirect

Common MHWZ400TQ02 parts customers replace

These are frequent wear items on front-load washers and are available for this model.

Symptom Likely part Example part on this model
Washer won’t drain or leaves water in tub Drain pump Washer drain pump assembly WPW10730972
Water leaking around the door Door boot (bellow) or clamp Washer door boot WPW10111435
Door won’t latch or won’t start Door strike or door lock Washer door strike WP8540221
Slow fill or dripping at connections Fill hose Washer fill hose WP89503

Tips to order the right part the first time

  • Confirm the symptom and when it happens (fill, wash, drain, spin)
  • Compare your original part’s markings to the listing (part name and ID)
  • If you are replacing a door boot, inspect clamps for rust or loss of tension
  • If you are replacing a drain pump, check the trap area for coins, pins, and debris first

Why it matters

Using the correct, factory-specified part helps your Maytag washer fit right, seal right, and run reliably; it also reduces repeat repairs caused by mismatched components.

Last updated: February 2026

Yes, it’s worth fixing a Maytag washer when the repair is a common, contained failure (drain, door seal, latch) and the total repair cost stays well below the price of a comparable replacement. For your Maytag MHWZ400TQ02, parts support like a drain pump and door boot makes many repairs practical.

A simple repair vs replace checklist

  • Age: If the washer is under 8 years old, repairs usually make sense; over 8 years, compare costs more aggressively.
  • Repair cost: Proceed when the repair is under 50% of replacement cost.
  • Failure type: Drain, leak, and door-lock issues are typically straightforward; tub and bearing-related failures are typically expensive.
  • History: If you have had multiple repairs in the last 12 to 18 months, replacement is usually the better value.
  • Parts availability: If the key part is in stock, downtime stays low.

Common MHWZ400TQ02 repairs that are usually worth it

These are the types of issues we see most often on front-load washers where repair is cost-effective:

Quick cost guide (rule-of-thumb)

Repair type Typical effort Usually worth it?
Drain pump, door lock, door boot Low to medium Yes
Control board or motor Medium to high Depends on total cost
Outer tub, bearings, major tub leak High Usually no

Why it matters

A front-load washer like the Maytag MHWZ400TQ02 can run many more years after a targeted repair, but high-labor jobs (especially tub-related) can quickly exceed the value of the machine. Using a clear cost threshold prevents sinking money into repeat breakdowns.

What we recommend before you decide

Last updated: February 2026

For the Maytag MHWZ400TQ02 washer, the most common issues we see are drain and spin problems, leaks around the door area, and vibration or unusual noises. These often trace back to a kinked drain hose, excessive suds, a clogged pump path, or a door boot that is worn or not sealing.

Most common problems (and what to check first)

  • Won’t drain or shows a drain-related error: check for a kinked drain hose and clear the pump path.
  • Not filling or fills slowly: confirm both water faucets are fully open and inlet screens are not clogged.
  • Excess suds: use HE detergent and reduce the amount; the washer can run a suds routine when it detects too many suds.
  • Leaks at the front/door: inspect the door boot for tears, debris, or a clamp that has slipped.
  • Noisy or vibrating: level the washer so all four feet are firmly on the floor.

For model-specific operating and troubleshooting steps, follow the error-code and setup guidance in the MHWZ400TQ02 owner's manual.

Quick symptom-to-part guide (common fixes)

Symptom Most likely area Part on this model that often helps
Won’t drain, long drain time Drain pump or blockage Washer drain pump assembly WPW10730972
Water on floor at front Door seal not sealing Washer door boot WPW10111435
Boot loose at front lip Retaining spring clamp Washer door boot spring clamp WP8540108
Door won’t latch consistently Door strike or lock system Washer door strike WP8540221

Why it matters

Drain, leak, and balance problems can stop a cycle mid-wash, trigger error codes, and lead to repeat issues like odors, poor rinsing, or water damage. Fixing the root cause early also helps protect the control board, motor, and tub components.

Good habits that prevent repeat problems

  • Keep the washer level and stable to reduce vibration.
  • Use HE detergent and avoid overdosing to prevent suds-related drain issues.
  • Check pockets for coins and small items that can lodge in the drain path.
  • Wipe the door boot and remove debris that can compromise the seal.
  • Order the correct replacement parts by model number from this page or search by model at Sears PartsDirect.

Last updated: February 2026

Most common symptoms to help you fix your washers

Choose a symptom to see related washer repairs.

Main causes: clogged drain hose, house drain clogged, bad drain pump, water-level pressure switch failure, bad control b…

Main causes: broken lid switch or lid lock, bad pressure switch, broken shifter assembly, faulty control system…

Main causes: worn agitator dogs, bad clutch, broken motor coupler, shifter assembly failure, broken door lock, suspensio…

Main causes: water heater failure, bad water temperature switch, faulty control board, bad water valve, faulty water tem…

Main causes: lack of electrical power, wiring failure, bad power cord, electronic control board failure, bad user interf…

Main causes: no water supply, bad water valves, water-level pressure switch failure, control system failure, bad door lo…

Main causes: unbalanced load, loose spanner nut, worn drive block, broken shock absorber or suspension spring, debris in…

Main causes: leaky water inlet valve, faulty water-level pressure switch, bad electronic control board…

Main causes: bad lid switch or door lock, bad timer or electronic control board, wiring failure, bad water inlet valve a…

Repair guides for gas ranges

How to replace an oven temperature sensor on a gas range

How to replace an oven temperature sensor on a gas range

See how to replace an oven temperature sensor on a gas range.…

Repair time and Difficulty

 15 minutes or less
How to replace a range spark igniter electrode

How to replace a range spark igniter electrode

Learn how to replace the spark igniter electrode for the surface burners on a gas range or dual-fuel range.…

Repair time and Difficulty

 45 minutes or less
How to replace a gas range oven control board

How to replace a gas range oven control board

These step-by-step instructions explain how to replace an oven control board on a gas range…

Repair time and Difficulty

 15 minutes or less

Effective articles & videos to help repair your washers

Use the advice and tips in these articles and videos to get the most out of your washer.

How auto-load sensing washers work (and when they don't)

How auto-load sensing washers work (and when they don't)

Your washer barely fills or seems stuck in sensing mode? Find out how auto-load sensing and Precise Fill features work, …

How to remove the main control board and user interface from a Maytag Epic Z front-load washer

How to remove the main control board and user interface from a Maytag Epic Z front-load washer

Get step-by-step instructions for removing the main electronic control board and the control panel from a Maytage Epic Z…

Using a wiring schematic to trace a current video

Using a wiring schematic to trace a current video

Find out what’s wrong with your appliance by following a circuit.…

Parts & More

Bottom-Mount Refrigerator
Dishwasher
Engine & Drivetrain
Front-Engine Lawn Tractor
Home Theater System
Parts
Range Hood
Washer