Kenmore 23353345590 range hood Parts

For the Kenmore 23353345590 range hood, the most common problems are a fan that will not run or is noisy, weak airflow, and lights that do not work. These issues usually trace to the fan motor or blade, a failing switch, or a loose/dirty filter and vent path; use the owner's manual for model-specific access and cleaning steps.

Most common symptoms and likely causes

• Fan does not run: failed fan switch, failed fan motor, loose wiring at the harness
• Fan runs but airflow is weak: clogged filter, blocked duct/damper, greasy blower wheel or blade
• Fan is loud or rattles: bent blade, loose mounting, worn motor, debris in blower housing
• Lights do not work: bad bulb, loose lens/socket connection, switch issue
• Fan turns on by itself or acts erratic: sticking switch contacts or wiring connection problem

Parts that commonly fix these issues

If your symptoms match, these model-specific parts are common replacements:

• Range hood fan motor S97011220
• Blade S99020287
• Fan blade S99020272
• Switch S97016970
• Switch wht S97016971

Symptom	What to check first	Common fix
Fan will not run	Power to hood, switch action	Replace switch or motor
Loud fan	Blade tightness, debris	Replace blade or motor
Weak suction	Filter and ducting	Clean filter, clear damper/duct
Lights out	Bulb and lens fit	Reseat lens, replace bulb, check switch

Quick checks we recommend before replacing parts

• Turn off power at the breaker; confirm the hood has power.
• Remove and clean the filter; heavy grease buildup reduces airflow fast.
• Check the vent damper for sticking; make sure ducting is not crushed or blocked.
• Spin the fan by hand (power off); rubbing or wobble points to a blade or motor issue.
• If the fan only works on some speeds, the switch is the first part to suspect.

Why it matters

A range hood that is noisy, weak, or intermittent does not clear smoke and grease effectively; that can leave odors, residue on cabinets, and extra heat over the cooktop.

Last updated: March 2026

On the Kenmore range hood model 23353345590, the main parts are the hood body (canopy), the venting path (damper and ducting), the blower and motor that move air, the filters that trap grease or odors, and the light and switches that control operation. See the 23353345590 owner's manual for the exact component names used for your hood.

Common range hood parts and what they do

• Hood canopy (housing): the metal body that captures smoke and steam
• Grease filter(s): removable aluminum filters that catch grease (typically dishwasher-safe)
• Ventless (charcoal) filter (if equipped): used for recirculating setups; replaced periodically
• Blower and fan blade: moves air through the hood
• Fan motor: drives the blower
• Damper and vent cover: helps direct airflow and reduce backdrafts
• Lights and lens: illuminates the cooktop
• Control switches: rocker switches for fan speed and light

Parts you can replace on model 23353345590

These are examples of replaceable components we commonly see on this model:

Part name	What it affects	Example symptom when it fails
Range hood blower assembly S97012248	Air movement	Fan runs weak, rattles, or will not spin
Range hood fan motor S97011220	Fan power	Fan hums, stalls, or will not start
Range hood light lens S99110437	Light cover	Lens cracked, missing, or discolored
Switch S97016970	Fan/light control	Fan speeds or light will not turn on

How to identify the right part name when ordering

Use the naming from the label and manual so you match the correct diagram and part listing.

• Find the model label inside the hood
• Write down the model number 23353345590
• Note the part description (for example: blower assembly, switch, light lens)
• Compare what you see to the exploded-view style names in the manual

Why it matters

Using the correct part name helps you avoid ordering the wrong blower, motor, or switch, and it speeds up troubleshooting when the fan is noisy, the hood does not vent well, or the lights will not work.

Last updated: February 2026

On Kenmore range hood model 23353345590, a fan that will not run is usually caused by a failed fan switch, a loose or burned wire connection, or a problem in the blower assembly or fan motor. Start with power and switch checks, then inspect the blower wiring and motor.

Quick checks first (fastest fixes)

• Confirm the hood has power (reset the breaker or GFCI if tripped).
• Set the rocker fan switch to HIGH and LOW; on this model OFF is the middle position.
• If the fan runs intermittently, stop using any external speed controller; this hood is not designed for solid-state speed controls.
• Remove and clean the filters; heavy grease buildup can restrict airflow and make the fan seem weak.
• If the fan hums but will not spin, the blade may be stuck with grease or the motor may be failing.

What to inspect inside the hood (power off)

Always disconnect electricity before servicing; then follow the removal and wiring guidance in the 23353345590 owner's manual.

• Check the fan switch for heat damage or loose terminals.
• Inspect the blower plug connection; reseat it firmly.
• Look for pinched, cut, or overheated wires near the motor bracket.
• Spin the fan blade by hand; it should turn freely without scraping.

Common parts that fix a no-fan problem

Symptom	Most likely cause	Part to consider (if applicable)
No response on any speed	Failed fan switch	Switch S97016970
Switch works but motor is dead/hums	Failed motor	Range hood fan motor S97011220
Motor runs but airflow is poor/noisy	Grease buildup, damaged wheel/blade, loose mounting	(Clean first; then inspect blade and bracket)

Why it matters

A working range hood fan helps remove heat, smoke, and grease; keeping the fan, filters, and grease-laden surfaces clean also reduces grease-fire risk and improves ventilation performance.

Last updated: February 2026