Where is the model number on a Craftsman tiller?
On a Craftsman tiller, the model number is printed on an ID label (a sticker or metal tag) attached to the machine. For Craftsman model 917292400, you will most often find that label on the tine shield/guard area or on or near the fuel tank.
Common places to check first
Look for a rectangular label with numbers and letters; wipe dirt and oil off so you can read it.
- On the tine shield (tine guard) near the front of the tiller
- On or near the gas (fuel) tank
- On the main frame rails near the engine mount
- Near the handle support brackets
- On the front of the unit on some larger frame styles
Quick ID-label checklist
Use this to confirm you are reading the correct tag.
| What you see on the label | What it means | What to do with it |
|---|---|---|
| Model number (example: 917292400) | Identifies the exact tiller version | Use it to match diagrams and parts |
| Serial number | Production identifier | Keep it for service records |
| Engine model/type/code (if shown) | Identifies the engine, not the tiller | Use it for engine parts like carburetor or recoil |
Why it matters
The model number is what we use to match the correct Craftsman parts list for your tiller, including drive components like the husqvarna tiller drive belt 532133035 and hardware that fits the exact frame and tine assembly.
If the label is missing or unreadable
You can still narrow it down using physical features and a few key parts.
- Compare your handle controls and tine engagement setup to the parts diagrams
- Check whether your unit has a forward drive belt and a separate reverse belt
- Inspect the belt cover and pulley layout for a match
- Look for stamped numbers on the frame (sometimes near the tine shield)
- If you are troubleshooting tine movement, follow the steps in tiller wheels and tines won't turn
Last updated: January 2026
What tiller is made in the USA?
Some tillers are made in the USA, but it depends on the brand and the specific model. For example, Mantis states its tillers are designed, engineered, and manufactured in the U.S.A.; for your Craftsman 917292400 front-tine tiller, use the model’s ID plate and parts list to confirm origin and component sourcing.
How to identify where a tiller is made
Check the tiller’s product ID plate (typically on the frame near the engine or handlebar mount). Look for:
- “Made in …” or “Assembled in …” wording
- A manufacturing address or country of origin
- An engine brand and model (engine origin can differ from the tiller’s origin)
- A serial number that can help a manufacturer confirm build location
What “made in the USA” can mean
Country-of-origin labeling varies by product and component. Here’s a practical way to interpret common phrases:
| Label wording | What it usually indicates | What to do next |
|---|---|---|
| Made in USA | Product is represented as U.S.-made | Confirm on the ID plate and packaging |
| Assembled in USA | Final assembly in U.S.; parts may be imported | Ask the manufacturer about major components |
| Made in USA with global materials | U.S. build with some imported parts | Expect mixed sourcing |
Why it matters
Knowing the build origin helps when you are matching replacement parts (belts, pulleys, hardware) and when you are comparing durability, service support, and parts availability across brands.
Parts that commonly affect “what fits” more than country of origin
For the Craftsman 917292400, fit is driven by the exact model and drive system. These parts are often involved in compatibility checks:
- Drive belt and reverse belt routing and length
- Idler pulley and idler arm geometry
- Control lever and clutch cable adjustment
- Transmission sheave alignment
If you are troubleshooting drive or tine engagement, start with how to replace a tiller drive belt.
Last updated: January 2026
How much does it cost to fix a tiller?
For a Craftsman front-tine tiller model 917292400, most common repairs cost under $100 when you replace wear items yourself (belts, pulleys, and small hardware). If you use a small-engine repair shop, total cost is parts plus hourly labor, so diagnosis time is the biggest variable.
Typical repair cost ranges
These ranges cover the most common front-tine tiller fixes.
- Basic tune-up (spark plug, air filter, oil change): lowest-cost service
- Drive issues (belt wear, idler pulley problems, belt tension): common mid-range repair
- Tilling performance (tine wear, depth adjustment): usually parts plus light labor
- Fuel system service (carburetor cleaning, fuel line work): adds labor time
- Transmission/internal damage: highest cost and often not cost-effective
| Repair type | Typical DIY parts cost | Typical shop cost drivers |
|---|---|---|
| Drive belt replacement | $25 to $100 | 0.5 to 2.0 hours labor + parts |
| Tune-up service | $20 to $60 | 0.5 to 1.5 hours labor + parts |
| Control/linkage adjustment | $5 to $75 | Diagnosis time + adjustment |
Parts on model 917292400 that often affect repair cost
If the tiller slips, the tines will not engage, or you smell burning rubber, these parts are common culprits:
- Husqvarna tiller drive belt 532133035 (belt wear, glazing, stretching)
- Idler pulley 532161806 (bearing drag, wobble, belt misalignment)
- Tiller reverse drive belt 599385301 (reverse slipping or not pulling)
- Control lever 584447601 (engagement control not holding tension)
How we estimate your total cost
- Start with the symptom (won’t start, poor tilling, tines won’t turn, won’t move)
- Inspect wear items first (belts, idler pulley, loose fasteners)
- Compare parts cost to labor time (most shops bill 1 to 2 hours for common drive or fuel issues)
Helpful DIY steps and photos are in how to replace a tiller drive belt.
Why it matters
On the Craftsman 917292400, normal wear in the belt and idler system is the most common reason for slipping or no-tine engagement. Catching belt and pulley wear early keeps repairs inexpensive and helps prevent secondary damage.
Last updated: January 2026
