How many years does a LG washing machine last?
LG washing machines typically last 10 to 15 years. For the LG WM3370HRA, lifespan depends most on load size, how often you run cycles, and routine maintenance; the warranty section in the WM3370HRA owner's manual also highlights long-term coverage for key components like the motor and drum.
Typical lifespan and what affects it
Most front-load washers reach the 10 to 15 year range when they are installed correctly, kept level, and not routinely overloaded.
Common factors that shorten washer life:
- Frequent overloading (extra strain on the drive system and suspension)
- Too much detergent (soap buildup, odors, and drainage issues)
- Skipping routine cleaning (pump filter, door boot area, dispenser)
- Hard water scale (can impact valves and heating performance)
- Repeated out-of-balance spinning (wear on shocks and springs)
What “wear-out” looks like on this model
On the WM3370HRA, the most common age-related symptoms usually point to a specific system. These are the areas we check first:
| Symptom | Most likely system | Example part on this model page |
|---|---|---|
| Won’t drain, drains slowly, or hums | Drain pump and hoses | Drain pump motor (4681EA2001T) - washer part by LG electronics 4681EA2001T |
| Won’t fill, fills slowly, or gets fill errors | Water inlet valve | Washer water inlet valve 5221ER1003A |
| Door won’t lock or cycle won’t start | Door lock/strike | LG washer door lock EBF61315802 |
| Excess vibration or banging in spin | Suspension | LG washer shock absorber ACV72909503 |
Maintenance that adds years (practical checklist)
We recommend these habits to keep an LG front-load washer running longer:
- Keep the washer level; re-check if it starts walking or vibrating
- Clean the door boot area and leave the door slightly open between loads
- Use HE detergent and measure carefully (less is usually better)
- Run a monthly tub-clean cycle (or hottest cycle recommended in the manual)
- Check pockets to prevent coins and debris from damaging the drain system
Why it matters
Washer lifespan is mostly about preventing “secondary damage.” A small issue like restricted draining can lead to longer cycle times, odors, and extra strain on the motor and suspension, which shortens the life of the whole machine.
If you’re planning ahead for repairs, you can order WM3370HRA replacement parts from the parts list for this model, or search by model number on Sears PartsDirect.
Last updated: February 2026
How to reset LG washing machine error code?
To clear many error codes on your LG WM3370HRA washer, we reset the control by powering the washer off, then restoring power and restarting the cycle. For model-specific button sequences and error-code meanings, use the WM3370HRA owner's manual.
Quick reset steps (most common)
- Press POWER to turn the washer off.
- Unplug the washer (or switch the breaker off).
- Wait 1 minute.
- Plug the washer back in (or switch the breaker on).
- Press POWER, then press START/PAUSE to try the cycle again.
If the code comes right back
Some codes are telling you the washer still detects the problem. Check these common causes first:
- Door not locking: make sure no clothing is caught in the door opening and close the door firmly.
- Slow or no drain: check for a kinked, pinched, or clogged drain hose; confirm the hose is routed correctly.
- Overload or out-of-balance: reduce the load size and redistribute items.
- Water fill issues: confirm both supply faucets are fully open and inlet hoses are not kinked.
Helpful model-specific resources
If you want the fastest match for the code you see on the display, use these LG washer guides:
Parts that commonly relate to recurring error codes
If troubleshooting points to a failed component, these are common fixes for this model:
| Symptom you notice | Common related part | What it affects |
|---|---|---|
| Won’t drain, drains slowly | Drain pump motor (4681EA2001T) - washer part by LG electronics 4681EA2001T | Pumping water out during drain/spin |
| Won’t fill or fills incorrectly | Washer water inlet valve 5221ER1003A | Water entering the washer |
| Door won’t lock, cycle won’t start | LG washer door lock EBF61315802 | Door lock confirmation and safety interlock |
Why it matters
Resetting clears the control and lets you confirm whether the issue was a temporary glitch or an active problem (like a drain restriction or door-lock fault). If the code returns immediately, fixing the underlying cause prevents repeat shutdowns and incomplete cycles.
Last updated: February 2026
Is LG a good washing machine front loader?
Yes. LG front-load washers like the LG WM3370HRA are a strong choice for efficient cleaning, high-spin water extraction, and quiet operation when they are installed correctly and maintained. For best results, follow the care and troubleshooting steps in the WM3370HRA owner's manual.
What makes LG front-load washers a good choice
Front-load washers are designed to use less water while still cleaning well through tumbling action. In typical household use, you can expect:
- Strong cleaning with lower water use (HE design)
- Faster dry times because high spin removes more water
- Gentler fabric care than many agitator-style washers
- Good capacity for bulky loads when you avoid overfilling
- Lots of cycle options depending on the model
Common issues and the parts that often solve them
A few maintenance items and wear parts drive most front-load washer complaints:
- Musty odor: wipe the door boot, leave the door ajar, run periodic tub-clean cycles
- Not draining: check for a kinked hose and clean the pump filter; a failing pump often points to the drain pump motor (4681EA2001T) - washer part by LG electronics 4681EA2001T
- Door will not lock or start: inspect the latch area; common fixes include the LG washer door lock EBF61315802 or the LG washer door lock strike MFG63099101
- Slow fill or no fill: confirm both faucets are fully open and clean inlet screens; a failing valve can be the washer water inlet valve 5221ER1003A
Quick “good fit” guide
| Priority | Front-load washer is a good fit when... |
|---|---|
| Efficiency | You run multiple loads weekly and use HE detergent correctly |
| Performance | You avoid overstuffing and choose the right cycle/soil level |
| Low hassle | You keep the door boot dry and clean filters periodically |
Why it matters
Front-load washers reward simple habits. Keeping water flow strong and preventing standing moisture helps protect key systems like the inlet valve, drain pump, and door lock, which directly affects reliability and wash results.
You can order WM3370HRA replacement parts from the parts list for this model, or search by model number on Sears PartsDirect.
Last updated: February 2026


