Kenmore Elite 79032643314 gas range Parts

A Kenmore gas range like model 79032643314 typically lasts about 15 years with normal household use. Regular cleaning, correct burner flame, and prompt repair of ignition or temperature issues help you reach that lifespan; see the 79032643314 use and care guide for model-specific care steps.

Typical lifespan and what affects it

Most ranges reach their full service life when heat, gas flow, and ignition stay consistent.

• Cooking frequency (daily use shortens life compared to occasional use)
• Cleaning habits (grease and spills accelerate wear)
• Ventilation (good airflow reduces heat stress on controls)
• Gas quality and flame (steady blue flame is ideal)
• Timely part replacement (small failures can cascade into bigger ones)

Quick maintenance checklist (high impact)

Use these habits to reduce common failures in burners, oven temperature control, and electronics.

• Keep burner caps seated and ports clear; clean and dry after boilovers
• Wipe the control panel and knobs with non-abrasive cleaner
• Avoid letting liquids run under the cooktop
• If the range has been in cold storage, let it sit above 32°F for 3+ hours before powering on (protects the electronic control)
• Use a properly rated range hood; avoid “air curtain” style hoods unless specifically approved for use with a gas range

Parts that commonly impact performance over time

If cooking results change, these parts are frequent culprits on gas ranges.

Symptom	Common cause	Example part for this model
Oven bakes unevenly or temperature swings	Sensor drifting out of spec	Range oven temperature sensor 5304504897
Burners click but don’t light reliably	Weak spark output	Range spark module 5304508269
Oven won’t heat or heats inconsistently	Gas flow issue at oven	Frigidaire range oven gas valve 316031501

Why it matters

A 15-year lifespan is realistic when the oven temperature stays accurate and the surface burners ignite cleanly. Addressing early symptoms (slow ignition, erratic baking, orange flames that do not clear) helps prevent repeated overheating and premature control or valve failures.

Last updated: February 2026

If you can’t find a part for your Kenmore Elite gas range model 79032643314, the fastest path is to confirm the model number, then use the parts diagrams and manual to match the exact part name and number before ordering. Start with the 79032643314 owner's manual for model-specific identification details.

Quick checks that solve most “missing part” searches

• Recheck the full model number and any suffix characters on the rating plate.
• Search by the part number (if you have it) instead of the part name.
• Try a simpler keyword (example: “igniter” instead of “spark igniter and holder”).
• Use the exploded-view diagrams to match the part by location and shape.
• Confirm you are shopping the correct appliance type (range vs. wall oven).

Common reasons a part doesn’t show up

What you see	What it usually means	What to do next
No results by name	Name varies by diagram/brand wording	Search by function or part number
Similar parts appear	Multiple versions by burner size/finish	Match BTU, color, and position
Part looks right but won’t fit	Model number mismatch	Verify model/serial from the appliance tag

If you need a “known match” example

For ignition problems, many customers start by identifying the ignition system components in the diagrams, then matching to a listed part such as the range spark module 5304508269 (when symptoms point to weak or inconsistent sparking across burners).

Why it matters

Ranges often use multiple similar-looking parts (burner caps, burner heads, orifices, igniters) that differ by BTU rating or location. Matching the exact model 79032643314 and the diagram callout prevents ordering a part that installs correctly but performs poorly.

Last updated: February 2026

For Kenmore Elite model 79032643314, the model and serial number are on the serial plate located on the left side of the oven frame. Open the oven door and look along the left front frame area for the rating label; it lists both the model and serial.

Where to look on the range

Check these common label locations first:

• Open the oven door and inspect the left side of the oven frame (most common for 79032643314)
• Look along the front frame near the door opening (eye-level with the door open)
• If you have a storage drawer, pull it out and look at the frame edges around the opening
• Use a flashlight; the label can be low-contrast or partially hidden by the door gasket

For a diagram-style reference and other label locations used across this model family, use the 79032643314 owner's manual.

What the label looks like (and what to write down)

The serial plate is a printed rating label. Record these items exactly as shown:

• Model number (example format: 790.3263* or 790.3264* family, your full model is 79032643314)
• Serial number
• Date of purchase (if you are documenting service history)

Quick checklist

Item	Why you need it
Model number	Ensures you get the correct Kenmore Elite gas range parts
Serial number	Helps match production run details for certain components
Gas type (NG/LP)	Important for burner/orifice and conversion-related parts

Why it matters

Using the exact model number prevents ordering the wrong parts for your Kenmore Elite range, especially for components that vary by version, such as burner caps, igniters, and the oven temperature sensor.

Last updated: February 2026

Kenmore Elite gas ranges (including model 79032643314) are sold under the Kenmore brand, but they are built by different original equipment manufacturers (OEMs) depending on the model and production run. For the most accurate manufacturer and service details tied to your exact unit, we recommend checking the identification information in the 79032643314 owner's manual.

How Kenmore manufacturing works

Kenmore is a brand; it does not operate a single dedicated factory for all Kenmore Elite ranges. Instead, Kenmore sources appliances from multiple OEMs, so the maker can vary even within the same product type.

Common OEMs you may see associated with Kenmore appliances include:

• Whirlpool
• LG
• Panasonic
• Daewoo Electronics
• Other OEM partners used for specific model families

How to identify the OEM for your specific range

The most reliable way to identify who built your Kenmore Elite 79032643314 is to match the model and identification details on the appliance to the documentation.

Use these checks:

• Confirm the full model number is 79032643314 (not a partial number)
• Locate the rating plate label (often on the oven frame behind the door, or on a side frame)
• Compare the label information to the model coverage shown in the 79032643314 owner's manual
• Use the parts list for your model to confirm component families (ignition, gas valve, regulator)

What “790” usually indicates (helpful context)

Many Kenmore model numbers use a prefix that aligns with a manufacturing source. The 790 prefix is commonly associated with Frigidaire-built Kenmore ranges. That said, the sure match is always the model and identification label on your unit.

What you check	What it tells you	Why it helps
Model number (79032643314)	Exact product identity	Ensures correct parts and service info
Rating plate details	Factory and certification data	Helps confirm build source
Parts used (gas valve, regulator, spark system)	Component platform	Helps match the correct replacement parts

Why it matters

Knowing the OEM helps you get the right repair approach and the right replacement parts (for example, ignition components like a range spark module 5304508269 or gas components like a regulator 316091711). It also helps when you are comparing manuals, wiring schematics, and troubleshooting steps.

Last updated: February 2026

If your Kenmore Elite gas range 79032643314 is not working, the most common causes are a power supply issue (controls and igniters need electricity), a gas supply problem, or a failed ignition component. Start with basic checks, then focus on the burner ignition system and oven temperature sensing.

Quick checks first (fastest fixes)

• Confirm the range has power; the display, oven light, and igniters all depend on it.
• Make sure the gas shutoff valve is fully open.
• If the cooktop clicks but will not light, clean and dry the burner cap and burner head.
• If the oven will not heat, watch for ignition; a weak ignition system can prevent the gas from lighting.
• Review the troubleshooting section in the 79032643314 use and care manual for model-specific operating checks and “Before you call” guidance.

What to check based on the symptom

Symptom	Most likely causes	What we recommend
Nothing works (no display, no lights)	No power, tripped breaker, loose cord	Reset breaker, verify outlet power
Cooktop won’t spark/click	Ignition circuit issue	Check wiring and ignition components
Cooktop clicks but won’t light	Dirty/wet burner parts, misaligned cap	Clean, dry, reseat cap and head
Oven won’t heat or heats inconsistently	Sensor or gas/ignition issue	Check sensor and ignition performance

Parts that commonly solve “not working” complaints

These are model-matched parts we often see involved when ignition or heating is the problem:

• Range spark module 5304508269 (if multiple burners stop sparking)
• Range oven temperature sensor 5304504897 (if oven temperature is erratic or baking is unreliable)
• Frigidaire range oven gas valve 316031501 (if gas is not being delivered to the oven burner)

Why it matters

A gas range can fail in two different ways: it can lose power (controls and igniters stop) or lose gas/ignition (gas is present but won’t light). Separating the symptom helps you avoid replacing the wrong part and gets you back to safe, consistent cooking faster.

Last updated: February 2026