Kenmore 11026862502 washer Parts

Your Kenmore washer model number is printed on the model and serial number label; for Kenmore model 11026862502, the label is located under the washer lid. Use that exact model number when looking up parts, manuals, and troubleshooting info in the owner's manual.

Where to look on Kenmore washers

For Kenmore washers, the model and serial number label is typically in one of these spots:

• Top-load washers: under the lid (often along the rim of the opening)
• Front-load washers: inside the door opening (around the door frame)
• Some models: on the back panel near the power cord or control console

What the model number looks like

Kenmore washer model numbers commonly:

• Start with 110. (many Kenmore-built-by-Whirlpool designs)
• Include 8 to 11+ digits/characters
• Appear next to a serial number on the same label

Quick check table

What you see on the label	What it means	What to do next
Model number (example: 11026862502)	Identifies the exact washer design	Use it to match parts and diagrams
Serial number	Identifies the production unit	Keep it for service records
Purchase date (your record)	Helps with warranty timing	Write it in your manual

Why it matters

Using the exact model number prevents ordering the wrong parts for common repairs like a no-spin condition (often tied to a worn agitator dog 80040 or a failed washer lid switch assembly WP8318084) and helps you pull the correct wiring diagrams and cycle details.

Last updated: February 2026

A Kenmore washer typically lasts 10 to 15 years. For your Kenmore 11026862502, lifespan depends most on load size, balance, and routine care; following the maintenance and loading guidance in the owner's manual helps the washer run reliably for years.

Typical lifespan and what changes it

Most washers land in the 10 to 15 year range; the biggest differences come from how the machine is used and maintained.

Biggest lifespan drivers:

• Overloading (loads should move freely during washing)
• Unbalanced loads (extra stress on suspension and drive components)
• Detergent and bleach habits (avoid undiluted bleach on fabrics)
• Frequency of use (multiple heavy loads daily shortens life)
• Wear parts (couplers, clutches, pumps, lid switches)

Maintenance habits that extend life

These habits match the care guidance for this washer style and reduce strain on the drive system and tub.

• Keep loads balanced; mix large and small items
• Avoid overfilling; the load should tumble and circulate freely
• Use the right amount of detergent; too much can cause residue and extra rinsing
• Add bleach correctly; never pour undiluted bleach directly on the load
• Check pockets and tie strings or sashes to prevent tangling and tearing

Parts that commonly affect “end of life” decisions

When a washer stops agitating, spinning, or draining, these parts are frequent culprits on many Kenmore top-load designs.

Symptom	Common suspect	Example part for this model
Won’t agitate well	Worn agitator dogs	Agitator dog 80040
Won’t spin or agitates poorly	Drive coupling issue	Washer motor coupling 285753A
Won’t drain	Pump problem or blockage	Washer drain pump WP3363394
Won’t run with lid closed	Lid switch failure	Washer lid switch assembly WP8318084

Why it matters

Knowing the 10 to 15 year average helps you decide whether to maintain, repair, or replace. If your 11026862502 is within that window, fixing a single wear part (like a drain pump or motor coupling) often restores normal washing and spinning.

Last updated: February 2026

Yes, repairing a Kenmore washer is usually worth it when the problem is a common wear item (like a lid switch, drain pump, or motor coupling) and the machine is otherwise in good shape; for Kenmore model 11026862502, many repairs are straightforward and cost far less than replacement.

Quick way to decide (repair vs. replace)

Use these practical checkpoints before you buy parts or schedule service:

• Repair makes sense when the washer still fills, drains, and spins sometimes, and the issue is intermittent.
• Repair makes sense when the fix is a single part such as a lid switch, pump, or agitator components.
• Consider replacing when the tub or basket is severely damaged, the washer has repeated major failures, or multiple expensive parts are needed at once.
• Consider replacing when the washer has chronic leaks plus poor agitation or weak spin (often more than one system involved).
• Always check your warranty paperwork if the washer is within coverage; the manual for this model includes warranty terms.

Common, cost-effective repairs for model 11026862502

These are frequent fixes on direct-drive Kenmore top-load washers and are often worth doing:

• No spin or no drain due to a failed pump: washer drain pump WP3363394
• Won’t spin or won’t run because the lid safety circuit is open: washer lid switch assembly WP8318084
• Motor runs but washer will not agitate or spin (broken coupler): washer motor coupling 285753A
• Agitator “ratchets” or won’t move clothes well: agitator dog 80040

What the manual suggests checking first

Before deciding it is “not worth it,” rule out load and usage issues that mimic a mechanical failure:

• Avoid overloading; loads should move freely.
• Keep the load balanced to prevent strain and poor performance.
• Follow fabric care labels and use bleach correctly to prevent damage.

For model-specific operating guidance, use the owner's manual.

Cost and value comparison

Situation	Typical outcome	Usually worth repairing?
Single failed wear part (lid switch, pump, coupler)	One-part fix restores operation	Yes
Agitation problems only	Often agitator dogs or agitator parts	Yes
Multiple major symptoms (leak + no spin + loud grinding)	More than one repair likely	Sometimes
Major drivetrain or tub/basket damage	Higher parts and labor	Often no

Why it matters

A targeted repair keeps a solid Kenmore washer running for years and avoids the cost and hassle of replacement. Using the correct parts for 11026862502 also prevents repeat failures caused by mismatched components.

Last updated: February 2026