Kenmore 10652264100 side-by-side refrigerator Parts

For Kenmore side-by-side refrigerator model 10652264100, we clean the condenser coils by unplugging the refrigerator, accessing the coil area (often behind the base grille), then gently brushing and vacuuming dust off the coils and nearby fan area so the unit can release heat efficiently. See the 10652264100 owner's manual for your model’s cleaning and safety guidance.

Steps to clean the condenser coils

• Unplug the refrigerator (or disconnect power at the breaker).
• Pull the refrigerator out carefully to avoid kinking the water line.
• Remove the base grille if your coils are behind it.
• Use a coil brush to loosen dust and pet hair from the coils.
• Vacuum debris from the coils and the floor area around them.
• Reinstall the base grille, then restore power.

What to use (and what to avoid)

Item	Recommended	Why
Coil brush	Yes	Reaches between coil fins without bending them
Vacuum with crevice tool	Yes	Removes loosened dust quickly
Mild detergent and warm water	Yes (for exterior surfaces only)	Safe for general cleaning
Abrasive cleaners or harsh sprays	No	Can damage finishes and plastic surfaces

If the refrigerator is running a lot or seems warm

Dirty condenser coils reduce heat transfer and make the compressor run longer. In the troubleshooting guidance for this model, dirty condenser coils are specifically called out as a cause of longer run times; cleaning the coils is a primary fix.

Why it matters

Clean coils help your Kenmore 10652264100 maintain proper temperatures, reduce run time, and support efficient ice production by keeping the sealed system from working harder than necessary.

Last updated: February 2026

The most common problems we see on Kenmore refrigerators like model 10652264100 are cooling issues (poor airflow, dirty coils, defrost frost buildup), water leaks (clogged defrost drain or loose water connections), ice maker or dispenser trouble, and unusual noises from fans. Many fixes start with cleaning, checking seals, and verifying control settings in the 10652264100 owner's manual.

Quick checks that solve a lot of calls

• Confirm the refrigerator and freezer controls are set correctly (a bumped control can mimic a failure).
• Clean condenser coils and make sure airflow around the cabinet is not blocked.
• Listen for fan noise changes; a failing evaporator or condenser fan often gets louder before it quits.
• Inspect door gaskets for dirt or stickiness; clean them so doors seal and open smoothly.
• If ice tastes bad or looks gray, discard the first batches after new plumbing work and clean the bin.
• If water or ice slows down, check the filter for clogging or incorrect installation.

Common symptoms and the parts that are often involved

Symptom	Most common cause	Parts you may end up checking
Not cooling or warm spots	Restricted airflow, frost buildup, fan problem	Evaporator fan area, defrost system, condenser fan
Water under fridge or in fresh food section	Defrost drain issue, water line seep	Drain path, inlet valve, reservoir
Ice maker not making ice	Filter restriction, water supply issue, ice maker issue	Water filter housing, inlet valve, ice mold
Doors hard to open or not sealing	Dirty/sticky gasket, misalignment	Door gaskets, door cam

Model-specific tips from the manual

• For ice maker output problems, the manual points to checking control settings and allowing up to 24 hours after heavy ice use for production to recover.
• For slow water or ice issues, the manual notes a clogged or incorrectly installed filter can restrict flow; correct installation and a fresh filter restore performance.
• For doors that are difficult to open, the manual recommends cleaning dirty or sticky gaskets as part of routine care.

Why it matters

Most “major” refrigerator complaints trace back to airflow, sealing, or water flow. Fixing those early helps protect food temperatures, reduces compressor run time, and prevents repeat ice maker and leak problems.

Helpful DIY reading

If your refrigerator displays a code or you suspect an electronic issue, use Kenmore 106 model refrigerator error codes to narrow the problem before replacing parts.

Last updated: February 2026

Most Kenmore refrigerators last 10 to 15 years. For a Kenmore 10652264100 side-by-side refrigerator, lifespan depends most on routine care (cleaning, good door sealing, and steady temperatures) and fixing small issues early so they do not strain the sealed refrigeration system.

Typical lifespan and what affects it

A refrigerator’s life is mainly driven by compressor run time, airflow, and how well the doors seal.

• Condenser coil cleanliness (dirty coils make the compressor work harder)
• Door gasket condition (air leaks cause long run times and frost)
• Room temperature and ventilation around the cabinet
• Ice maker and water system health (leaks and restrictions create repeat problems)
• Defrost system performance (heavy frost reduces cooling and airflow)

Quick maintenance checklist (best payoff)

Use the schedule in your 10652264100 owner's manual to match the recommended cleaning and care steps.

Task	How often	Why it matters
Clean condenser coils	Every 6 to 12 months	Reduces compressor stress and heat buildup
Clean door gaskets	Every 1 to 3 months	Prevents air leaks and frost
Verify temps (fresh food and freezer)	Monthly	Catches cooling drift early
Replace water filter (if equipped)	About every 6 months	Protects flow to dispenser and ice maker

When a “simple part” helps extend life

If you are troubleshooting frost buildup, warm temps, or long run times, a failed defrost safety device is a common wear item on many side-by-side designs. For this model, the refrigerator defrost bi-metal WPW10225581 is one example of a part that can affect defrost reliability.

Why it matters

A refrigerator that runs longer than it should uses more energy and wears the compressor faster. Basic care (especially coils and door sealing) is the most reliable way to keep a Kenmore side-by-side refrigerator in the 10 to 15 year range.

Last updated: February 2026

For Kenmore model 10652264100, the most reliable way to get the exact cubic-foot capacity is to read the model and serial label inside the fresh food compartment and then confirm the listed capacity in the 10652264100 owner's manual. This avoids guessing based on similar 106-series refrigerators.

Where to find the capacity for model 10652264100

Check these spots in order:

• Model and serial label on the inside wall of the refrigerator compartment (fresh food section)
• The specifications/features section in the 10652264100 owner's manual
• Product literature that came with the refrigerator (often lists “capacity” or “total volume”)

Quick ways to estimate (when you just need a ballpark)

If you need an approximate size for planning (not for ordering parts), most Kenmore 106 side-by-side refrigerators are commonly in the 20 to 26 cu. ft. range.

Method	What you get	Best for
Rating plate + manual	Exact capacity	Accurate specs, comparisons
Measure interior and calculate	Rough estimate	Space planning only
Model-family comparison	Rough estimate	Quick reference only

Why it matters

Capacity affects how you compare refrigerators and how you set expectations for storage space, but it usually does not change which replacement parts fit. For parts selection, we use the full model number 10652264100 and the correct part ID.

Related parts and sections you may use often

These are common areas customers check while looking up specs and features:

• Controls and temperature settings
• Water and ice dispenser features
• Water filtration system details
• Storage features such as crisper and meat drawers (for example, the refrigerator crisper pan WP2188656)

Last updated: February 2026

On Kenmore side-by-side refrigerator model 10652264100, a “not cooling” problem is usually caused by lost airflow (blocked vents), control settings needing a reset, or a failed cooling component such as a fan or compressor. Start with airflow and control checks before replacing parts.

Quick checks we recommend first

• Confirm the refrigerator has power and the interior lights come on.
• Make sure the temperature controls are set correctly for the room conditions.
• Clear packages away from the air vents in both compartments (blocked vents stop cold air movement).
• Limit door openings and let temperatures stabilize for several hours after loading warm groceries.
• For digital controls, turn the unit OFF then ON to reset (per the 10652264100 owner's manual).

Most common causes (from easiest to more involved)

What you notice	Likely cause	What to do next
Freezer cold but fresh food warm	Air vents blocked or diffuser issue	Clear vents; check for frost or obstructions near the top vent return path
Both sections warm	Control needs reset or cooling system not running	Reset controls; listen for fans and compressor operation
Warm temps plus unusual fan noise or no airflow	Evaporator fan problem	Inspect fan area; replace damaged parts like the refrigerator evaporator fan blade WP2169142 if broken
Runs a lot but still warm	Sealed system or compressor issue	Check condenser area airflow; service may be needed for compressor or refrigerant issues

Why airflow matters on this model

This refrigerator relies on air circulation between the freezer and refrigerator sections. Cold air enters the refrigerator through the top vent and returns to the freezer; when vents are blocked by food (soda boxes, cereal, bread), airflow stops and temperatures rise even if the unit is running.

When a part is more likely the issue

If vents are clear and a control reset does not help, we focus on the cooling system components that move air and remove heat:

• Evaporator fan (moves cold air through compartments)
• Condenser fan (moves air over the condenser)
• Defrost system problems that cause heavy frost and block airflow
• Compressor and start components

For model-specific operating details and control reset steps, use the 10652264100 owner's manual.

Last updated: February 2026

For Kenmore appliances, the model number tells us the product family and who manufactured it. On Kenmore side-by-side refrigerator model 10652264100, the first three digits (106) identify the manufacturer series, and the remaining digits narrow down the exact design and features.

Where to find the model number on this refrigerator

For Kenmore 10652264100, we look on the model and serial number label inside the refrigerator compartment (typically on an inside wall). Confirm the full model number before ordering parts or using troubleshooting steps in the 10652264100 owner's manual.

• Open the fresh food (refrigerator) door
• Check the inside side walls near the crisper area
• Look near the top interior liner if you do not see it low
• Write down both the model and serial number
• Keep the purchase date with your records

How to interpret the number (quick breakdown)

Kenmore model numbers are usually read left to right.

Section	Example from 10652264100	What it means	Why you care
Prefix	106	Manufacturer series identifier	Helps match the correct parts diagrams and service info
Base model	522641	Core design family	Points to the right shelves, bins, and internal layout
Suffix/variation	00	Version or revision	Helps avoid ordering a similar-looking but wrong part

Why it matters when ordering parts

Using the complete model number prevents common fit issues, especially on items that vary by revision.

• Door bins and pans can change by production run
• Water system parts can differ by filter style and tubing routing
• Ice and dispenser components can vary by trim and control setup
• Door hardware (cams, gaskets) must match the exact door design

If you are replacing a storage component, match it to the diagram for 10652264100. For example, common fit-sensitive items include the refrigerator door cam (black) WP2182179 and the refrigerator door bin WP2156022.

Related help for Kenmore 106 refrigerators

If your refrigerator displays an error or you are troubleshooting electronics, use the model-family resource Kenmore 106 model refrigerator error codes to narrow down the issue before replacing parts.

Last updated: February 2026

On Kenmore side-by-side refrigerator model 10652264100, the model number is printed on the model and serial number label located on the inside wall of the refrigerator compartment (fresh food section). Use that label any time you order parts or schedule service.

Where to look (fast checklist)

• Open the refrigerator (fresh food) door, not the freezer door
• Look along the inside side wall of the refrigerator compartment
• Check near the upper side wall first, then scan downward
• Look for a label that lists Model and Serial together
• Write the full model number exactly as shown (for example, 10652264100)

What you should see on the label

The label typically includes both identifiers. Use this quick guide:

Item on label	What it’s used for	Example format
Model number	Matching parts and diagrams	10652264100
Serial number	Dating and service identification	Letters plus numbers

Why it matters

We use the model number to match the correct Kenmore parts for your exact configuration (shelves, bins, ice maker and water system variations). Even small model differences can change which parts fit.

Helpful next steps

• Confirm the full model number in the 10652264100 owner’s manual
• If you’re troubleshooting a display or diagnostic issue, use the Kenmore 106 model refrigerator error codes reference to interpret common code patterns
• When ordering water system parts, match by model first, then by the part ID (for example, refrigerator water filter housing WP2186443 if your unit uses that housing)

Last updated: February 2026