Kenmore 11073912100 gas dryer Parts

For Kenmore model numbers, we read the first three digits as the manufacturer prefix and the remaining digits as the specific design and feature set. For your Kenmore gas dryer model 11073912100, the 110 prefix indicates it was built by Whirlpool; the rest identifies the exact series and configuration for correct parts matching.

Your dryer’s complete model and serial numbers are printed on the model and serial number plate; using the full number prevents ordering the wrong drum, switch, or gas burner parts. See the location guidance in the owner's manual.

• Check the door opening area (often on the cabinet frame).
• Look for a label or metal plate that lists Model and Serial.
• Write the full model number exactly as shown (all digits).
• Use the full model number when searching diagrams and parts lists.
• Keep the number with your purchase records for future reference.

Kenmore model numbers typically break down into two useful sections:

Even small digit changes can mean different parts (timers, door switches, drum supports) across similar-looking dryers.

• Match the full model number before buying parts.
• Use the model number to confirm the correct version of common wear items.
• If you are diagnosing a symptom (no heat, no start), use model-based troubleshooting steps first.

The model number is the key to accurate exploded-view diagrams and correct replacement parts for your Kenmore 11073912100 gas dryer; it prevents repeat repairs and return hassles.

Last updated: February 2026

Yes. For your Kenmore gas dryer model 11073912100, the most reliable “reset” is a power reset: turn the dryer off, unplug it (or switch the breaker off) for about 1 minute, then restore power and start a cycle normally. See the owner's manual for the correct start and restart steps.

• Turn the Cycle selector (timer) to OFF.
• Unplug the dryer (or turn the circuit breaker OFF).
• Wait 60 seconds.
• Restore power.
• Close the dryer door fully.
• Select a cycle and press the PUSH TO START button firmly.

A “reset” will not fix a no-start condition caused by power, door, or control settings. Check these common items first:

• Confirm the dryer is plugged into a grounded 3-prong outlet.
• Check the house fuse/circuit breaker (reset breaker or replace fuse if needed).
• Make sure the door is closed tightly (opening the door stops the dryer).
• Verify the timer is set to a running/On position, not OFF.
• Press PUSH TO START again (a light press can fail to engage).

This model uses a mechanical timer and start switch, so “resetting” typically means restoring power and re-setting the controls.

A proper reset clears minor control confusion and gets you back to the correct start sequence. If the dryer still will not run, the checks above quickly separate a simple power or door issue from a part failure.

Last updated: February 2026

The exact drum capacity (in cubic feet) for Kenmore gas dryer model 11073912100 is not listed in the installation and safety pages of the owner's manual. Most Kenmore 110-series 27-inch gas dryers are typically in the 6.5 to 7.4 cu. ft. range, which handles large loads like towels and bedding.

We use the model/serial plate and the specifications section in the manual to match the correct capacity.

• Check the model/serial number plate to confirm the full model number is 11073912100.
• Look for a “Specifications” or “Features” section in the manual that lists capacity or drum volume.
• If the manual lists only dimensions, use the model number to match the correct spec listing for this exact unit.
• If you are comparing dryers, focus on drum size, cycle type (timed vs. automatic), and venting requirements.

For 27-inch wide gas dryers like this Kenmore model, capacity usually falls into these buckets:

Capacity affects drying performance and efficiency. A drum that is too full restricts tumbling and airflow, which increases dry time and can contribute to overheating conditions if venting is also restricted.

If you are troubleshooting long dry times or heat issues on this gas dryer, we recommend checking airflow and key safety components such as the dryer thermal fuse WP3390719 and keeping the lint screen and vent path clear.

Last updated: February 2026

Most Kenmore dryers average 10 to 13 years of service life with normal household use. Your Kenmore 11073912100 gas dryer can often last longer when airflow is kept strong (clean lint screen and venting) and the dryer is installed and operated as described in the owner's manual.

A dryer’s life is mostly driven by heat, airflow, and mechanical wear. These factors have the biggest impact:

• Vent restriction (long runs, crushed duct, lint buildup) increases heat stress
• Lint screen care (clean every load) helps airflow and drying performance
• Load size and frequency (heavy, frequent loads wear rollers, belt, and motor faster)
• Room temperature (many dryers perform best when the room is above about 45°F)
• Timely part replacement (fixing small wear items prevents bigger damage)

The manual emphasizes that proper care helps extend life and reduce service calls. Use this routine:

• Clean the lint screen before every load
• Check and clean the exhaust duct periodically so air flows freely
• Keep the area around the dryer clean and free of lint
• Avoid overloading; it strains the drum support system and drive components
• Address new noises early (thumping, squealing, scraping)

A dryer that is venting poorly or running with worn drum support parts runs hotter and works harder. That shortens component life, increases dry times, and can lead to repeat breakdowns.

Last updated: February 2026