Kenmore Elite 40141003011 refrigerator Parts

For Kenmore Elite model 40141003011, the capacity is 24.1 cu. ft.; it’s listed in the specifications chart in the owner's manual. If you’re checking a different Kenmore model, the same spec chart method is the fastest way to get the exact cubic feet.

The most reliable ways to find cubic feet

We use these methods in order, starting with the most accurate:

• Check the specifications chart in the owner's manual.
• Look at the model and serial label inside the fresh food section; some labels list capacity.
• Use the manual’s model group table if it lists multiple related models together.
• Estimate capacity by measuring usable interior space only when you cannot access the spec chart.

Specs shown for this model family

The manual’s spec table lists the capacity and key exterior dimensions:

Item	Spec
Capacity	24.1 cu. ft.
Overall width	35 13/16 in.
Overall height	70 in.
Overall depth	30 in.

If you want to calculate an estimate from measurements

Use this formula for an estimate based on interior measurements:

• Cubic feet = (height × width × depth in inches) ÷ 1728

Measurement tips:

• Measure the refrigerator and freezer compartments separately, then add them.
• Measure usable space (ignore door bins and fixed trim that reduce storage volume).
• Take measurements in multiple spots; interior walls are not always perfectly square.

Why it matters

Knowing cubic feet helps you compare side-by-side refrigerator sizes and plan storage. It also helps when you’re matching accessories and features such as shelves, door bins, and the ice bucket layout.

Last updated: February 2026

The most common problems we see with the Kenmore Elite 40141003011 side-by-side refrigerator involve ice and water dispensing, temperature control, and defrost-related cooling issues. Many of these symptoms trace back to a few serviceable parts and basic airflow or water-supply checks in the 40141003011 owner's manual.

Common symptoms and what usually causes them

• Ice maker not making ice or small cubes: restricted water supply, a failing inlet valve, or an ice maker issue
• Water dispenser slow or not dispensing: clogged filter, low house water pressure, or a valve problem
• Fridge warm but freezer cold (or vice versa): airflow blockage, evaporator fan issue, or sensor/control problem
• Frost buildup on the back wall or noisy fan: defrost system problem or iced-over evaporator cover
• Water leaking inside or under the unit: clogged/iced drain path or drain grommet issue
• Lights out or display acting up: LED board or control board concerns

Quick checks we recommend first

1. Confirm temperature settings and allow 24 hours after changes.
2. Make sure vents are not blocked by food packages.
3. Check the door seals for gaps and confirm doors close fully.
4. Verify the water shutoff valve is fully open and the supply line is not kinked.
5. Replace the water filter on schedule.

Parts that commonly solve these issues

Symptom	Part to check	What it does
No water or no ice	Refrigerator water inlet valve DA97-08587A	Opens to send water to the dispenser and ice maker
Slow water, bad taste	Samsung refrigerator water filter HAFCU1	Filters incoming water for dispensing and ice
Frost buildup, warm temps	Refrigerator defrost thermal fuse DA47-00301F	Protects the defrost circuit from overheating
Warm temps, poor airflow	Refrigerator evaporator fan motor DA31-00211B	Circulates cold air through compartments
Leaking water	Refrigerator drain tube grommet DA63-00951C	Helps route defrost water through the drain

Why it matters

Catching these issues early helps protect food temperatures, reduces compressor run time, and prevents secondary damage like ice buildup, leaks, and dispenser failures.

Last updated: March 2026

Kenmore refrigerators typically last 12 to 15 years. With consistent care (good airflow, clean condenser area, tight door seals, and stable temperatures), many units reach the upper end of that range; heavy use and poor ventilation shorten life. For your Kenmore Elite 40141003011, follow the care guidance in the owner's manual.

Typical lifespan and what affects it

Most refrigerator life comes down to heat management, door sealing, and how hard the sealed system has to work.

• 12 to 15 years is the normal expectation for a full-size refrigerator
• Dirty condenser area and restricted airflow increase run time and wear
• Worn or leaking door gaskets cause temperature swings and frost
• Frequent door opening and overpacking reduce airflow across shelves and vents
• Water and ice features add components that can need service over time

Quick maintenance checklist (high impact)

Use these habits to extend life and reduce common cooling and ice maker complaints.

• Keep vents inside the fresh food and freezer sections unblocked
• Clean spills and wipe surfaces with mild detergent; avoid harsh cleaners (per the manual)
• Confirm doors close fully and stay aligned; tighten loose handles if needed (per the manual)
• Maintain steady settings; avoid frequent temperature changes
• If you have a dispenser, replace the water filter on schedule; see how to replace the water filter in a Kenmore refrigerator

Common “age-related” repairs and what they mean

These are typical service items as a refrigerator gets older.

Symptom	Common cause	Typical fix
Warm refrigerator, freezer OK	Airflow issue or evaporator frost	Clear vents; check for frost buildup; service defrost system if needed
No ice or slow ice	Water supply pressure/valve/filter	Replace filter; verify water pressure; diagnose inlet valve
Clicking, won’t start cooling	Compressor start components	Test/replace overload/relay components
Water under fridge	Drain restriction	Clear/repair drain path

Why it matters

A refrigerator that runs longer to maintain temperature uses more energy and wears out key components faster. Simple airflow and cleaning habits reduce compressor run time and help your Kenmore Elite 40141003011 reach its full service life.

Last updated: February 2026