Kenmore 10657575790 refrigerator Parts

On Kenmore side-by-side refrigerator model 10657575790, the model number is printed on the model and serial number label located on the inside wall of the fresh food (refrigerator) compartment. Open the refrigerator door and look along the side wall for the label.

Where to look (fast checklist)

• Open the refrigerator (fresh food) door, not the freezer door
• Scan the side walls at about eye level
• Check near the crisper drawer area and the meat drawer temperature control area
• Look for a label that lists Model and Serial
• Write the full model number exactly as shown (for this unit it starts with 106.)

What the label typically shows

The label usually includes both the model and serial information. Use the model number when ordering parts like an ice maker assembly, thermostat, or door gasket.

Item on label	What it’s used for	Example for this model
Model number	Matching the correct parts list	10657575790 (often shown as 106.57575790)
Serial number	Identifying production details	Varies by unit

Why it matters

Using the exact model number helps us match the correct Kenmore 106-series parts and diagrams, which prevents ordering the wrong shelf, bin, or ice maker component.

Helpful tip

If you are using the manual to confirm the location, the Parts and Features section shows the model and serial number label on the side wall. See the owner's manual.

Last updated: February 2026

For your Kenmore side-by-side refrigerator model 10657575790, the most reliable way to confirm cubic feet is to check the rating plate inside the refrigerator (or behind the toe grille) for a “total volume” or “cu. ft.” listing; you can also estimate capacity by measuring the interior and converting cubic inches to cubic feet using 1,728.

Fast ways to find the capacity

• Check the rating plate: Look for “cu. ft.”, “total volume”, or similar wording.
• Use the interior measurement method: Measure usable interior height, width, and depth (in inches).
• Convert to cubic feet: Multiply H × W × D, then divide by 1,728.
• Separate compartments if needed: Estimate refrigerator and freezer sections individually, then add them.
• Confirm locations and labels in the owner's manual.

How to calculate cubic feet (simple formula)

1. Empty enough items to measure the usable space (ignore door bins and odd recesses if you want a realistic number).
2. Measure interior:
   • Height (in.)
   • Width (in.)
   • Depth (in.)
3. Compute:

What you measure	Formula	Example (sample numbers)
Interior volume (cubic inches)	H × W × D	60 × 28 × 24 = 40,320
Capacity (cubic feet)	(H × W × D) ÷ 1,728	40,320 ÷ 1,728 = 23.3

Why it matters

Knowing cubic feet helps us match the right refrigerator parts and maintenance needs (like water filter schedules, ice maker expectations, and airflow clearance). It also helps during outages; the manual references freezer space when planning dry ice amounts.

Related tip for this model

If you are estimating freezer capacity for outage planning, the manual guidance uses freezer cubic feet to size dry ice (2 lb per cubic foot of freezer space). See the owner's manual for the full food safety steps.

Last updated: February 2026

Kenmore refrigerators made by Whirlpool typically have model numbers that start with 106 (like Kenmore 10657575790). That prefix is the quickest way to identify Whirlpool-built Kenmore units when you are matching parts, diagrams, and service information for your refrigerator.

How to identify a Whirlpool-made Kenmore refrigerator

Use the model number prefix (the first three digits) as your primary identifier.

• 106: Whirlpool-built Kenmore refrigerators (common for side-by-side models)
• Check the full model tag inside the fresh food section (often on a side wall)
• Match parts by the full model number, not just the prefix
• Use the model’s documentation to confirm features like the ice maker and water filtration system

For your specific refrigerator, we recommend using the 10657575790 owner's manual alongside the parts list to confirm feature locations and component names.

Why the manufacturer matters for parts

Kenmore is a brand label; the actual manufacturer affects which components and designs your refrigerator uses (ice maker style, defrost system, door bins, shelves, and controls). That is why the same-looking Kenmore refrigerators can take different parts.

Examples of Whirlpool-style parts you may see on this model

These are common assemblies on Whirlpool-built side-by-side designs and are available for model 10657575790:

• Ice maker assembly - refrigerator ice maker by whirlpool 4317943
• Refrigerator defrost bi-metal WPW10225581
• Refrigerator heater WP2323198
• Refrigerator thermostat WP2198202

Quick reference table

What you have	What to check	What it helps you do
Kenmore model number starts with 106	Full model number on the ID label	Confidently match Whirlpool-built diagrams and parts
Ice maker or dispenser issues	Ice maker and dispenser parts list	Choose the correct assembly and switches
Cooling or frost issues	Defrost heater, defrost bi-metal, thermostat	Narrow down likely causes and replacement parts

Why it matters

When you confirm the refrigerator is Whirlpool-built (such as the 106 prefix), you reduce wrong-part returns and speed up troubleshooting because the defrost, ice maker, and control layouts follow Whirlpool’s design patterns.

Last updated: February 2026

On Kenmore refrigerator model 10657575790, the SY EF code points to an evaporator fan or evaporator temperature sensing problem that can stop proper airflow and cause warm temperatures. Start by power-cycling the refrigerator, then check for ice buildup and fan operation using the 10657575790 owner's manual.

What to check first (quick troubleshooting)

• Reset the control: unplug for 5 minutes, then restore power.
• Listen for the evaporator fan (freezer side): it should run when the compressor is running and the door switch is closed.
• Look for frost or ice on the freezer back wall; heavy frost often means a defrost system issue.
• Confirm vents are clear: blocked return vents can mimic a fan failure.
• Check door sealing: a leaking gasket can cause frost buildup and airflow problems.

Common causes and the parts that relate

SY EF is most often tied to airflow across the evaporator. These parts commonly affect that airflow on this style of Kenmore side-by-side:

Symptom you notice	Most likely area	Example part on this model page
Freezer cold, fridge warm	Airflow problem in freezer	Refrigerator evaporator fan blade WP2169142
Heavy frost on freezer back wall	Defrost system not clearing ice	Refrigerator defrost bi-metal WPW10225581 or refrigerator heater WP2323198
Temps swing or won’t regulate	Temperature control issue	Refrigerator thermostat WP2198202

Why it matters

The evaporator fan moves cold air through the freezer and into the fresh food section. When airflow drops (fan issue, ice blockage, or a defrost failure), temperatures rise, food spoils faster, and the refrigerator can run longer than normal.

Helpful DIY guidance

For step-by-step diagnostics that match Kenmore 106-series refrigerators, use our Kenmore 106 model refrigerator error codes guide alongside the 10657575790 owner's manual.

Last updated: February 2026

The most common problems we see on Kenmore refrigerators like model 10657575790 are no ice, warm temperatures (poor cooling), water leaks, excess frost, doors not sealing, and unusual noises. Many issues trace back to airflow, dirty condenser coils, or a failing defrost or ice maker system; use the owner's manual for model-specific checks.

Most common symptoms and what usually causes them

• Not cooling or weak cooling: blocked air vents, dirty condenser coils, evaporator fan issues, or a temperature control problem
• Ice maker not making ice: freezer not cold enough, ice maker shutoff arm in OFF position, or water supply valve turned off
• Water leaking: clogged defrost drain, loose water line, or dispenser-related leaks
• Too much frost: defrost system trouble (heater, defrost bi-metal, timer/control) or door gasket leaks
• Noisy operation: normal operating sounds, fan blade interference, or a worn fan motor

Quick checks we recommend first (safe DIY)

1. Confirm door closure: push doors fully shut; check for food packages blocking the door.
2. Clean condenser coils: dirty coils make the compressor run longer and cool poorly.
3. Check control settings: adjust for room conditions and allow time for temperatures to stabilize.
4. Verify ice maker basics: freezer cold enough, shutoff arm down (ON), water valve open.
5. Listen for fan noise: scraping or ticking can point to a fan blade or ice buildup.

Parts that commonly solve these problems on this model

If troubleshooting points to a failed component, these are common replacements available for model 10657575790:

Problem area	Common part to check/replace	Example part on this model
No ice	Ice maker assembly	Ice maker assembly - refrigerator ice maker by whirlpool 4317943
Frost buildup	Defrost bi-metal, defrost heater, defrost timer/control	Refrigerator defrost bi-metal WPW10225581, refrigerator heater WP2323198, refrigerator defrost timer 4388932
Warm temps	Temperature control, condenser fan motor	Refrigerator thermostat WP2198202, condenser motor W10822259
Noise in freezer	Fan blade (and related fan issues)	Refrigerator evaporator fan blade WP2169142

Why it matters

Catching airflow, coil, and door-seal problems early prevents long run times, temperature swings, and frost that can block vents and stop proper cooling. It also helps protect major sealed-system components like the compressor.

Last updated: February 2026