Whirlpool ED25PQXDN01 refrigerator Parts

Whirlpool model numbers identify the product type, series, and feature set; for your refrigerator, ED25PQXDN01 is the exact model you use to match compatible parts and diagrams. The most important step is copying the model number exactly as shown on the rating label before ordering parts.

On most Whirlpool side-by-side units, the model and serial tag is typically located:

• Inside the fresh food compartment on a side wall (often right side)
• Around the crisper drawer area (side wall or ceiling)
• On the cabinet frame near the door opening (not on the removable door)
• Occasionally behind the toe grille or on the back panel (less common)

• Model number: ED25PQXDN01 (use this to match parts)
• Serial number: helps identify production run details for some part variations
• Any suffixes: include every letter and number, in order

Whirlpool model numbers are a structured code. For ED25PQXDN01, here is the useful, customer-facing way to read it.

Using the full model number prevents ordering the wrong ice maker, thermostat, or door gasket. Even one character off can point to a different parts list.

• For ice production issues, match the ice maker to the model: ice maker assembly - refrigerator ice maker by Whirlpool 4317943
• For temperature control symptoms, the correct control part matters: refrigerator thermostat WP2198202
• For water and dispenser-related repairs, model matching helps avoid fitting issues

When you search or order, always use ED25PQXDN01 exactly (including the “01”). You can order parts from the list for this model, or search by model number on Sears PartsDirect.

Last updated: February 2026

For your Whirlpool ED25PQXDN01 side-by-side refrigerator, the most reliable way to get cubic feet is to look up the model’s published capacity; if you need a quick estimate, measure the usable interior space (in inches) and convert to cubic feet by dividing by 1,728.

• Look up the model number (ED25PQXDN01) in our parts listings and product info, then compare to similar Whirlpool side-by-side sizes.
• Measure the refrigerator compartment and freezer compartment separately, then add them together.
• Use usable space only: measure inside wall-to-wall, not including door bins, shelves thickness, or air channels.
• If you are shopping for replacement parts while you check capacity, you can also search by model on Sears PartsDirect.

1. Empty enough items so you can measure accurately.
2. Measure interior width, height, and depth (in inches) for:
   • Fresh food (refrigerator) section
   • Freezer section
3. Multiply each section: width × height × depth to get cubic inches.
4. Add the two sections together.
5. Convert to cubic feet: total cubic inches ÷ 1,728.

Most Whirlpool side-by-side refrigerators like the ED25 series are commonly in the low-to-mid 20 cu. ft. range. Your measured result may come out lower than the published number because shelves, ducts, and built-in features reduce usable space.

Cubic feet helps us match the right refrigerator parts and expectations for storage, airflow, and performance. It is also useful when comparing upgrades like an ice maker, water system components, or door sealing parts.

Last updated: February 2026

The most common Whirlpool refrigerator problem is poor cooling (fresh food too warm, freezer not holding temperature). On a Whirlpool side-by-side like model ED25PQXDN01, this is often tied to airflow restrictions, frost buildup from a defrost issue, or a failed evaporator fan that cannot move cold air through the compartments.

• Refrigerator warm, freezer OK: airflow problem (evaporator fan, blocked vents, frost on evaporator)
• Both sections warm: dirty condenser coils, condenser fan/compressor issue, or control/temperature sensing problem
• Ice maker stops or makes small cubes: water supply restriction or ice maker component failure
• Water under the refrigerator: clogged/iced defrost drain or a water line leak
• Frost on back freezer panel: defrost system problem (heater, defrost bi-metal, or related wiring)

1. Set temps to typical targets: 37°F fresh food, 0°F freezer.
2. Make sure vents are not blocked by food packages.
3. Listen for the freezer evaporator fan; it should run when the compressor is running.
4. Check for heavy frost on the freezer back wall (a strong defrost clue).
5. If you have an ice maker or dispenser issue, confirm the household water supply valve is fully open.

If your symptoms match, these model-compatible parts are common solutions:

• Cooling and temperature control: refrigerator thermostat WP2198202
• Frost buildup/defrost failures: refrigerator defrost bi-metal WPW10225581, refrigerator heater WP2323198
• No ice or intermittent ice: ice maker assembly - refrigerator ice maker by Whirlpool 4317943
• Ice dispensing problems: refrigerator ice auger W10422851

Cooling problems usually get worse over time and can lead to food spoilage. Catching a defrost or airflow issue early also helps prevent ice buildup that can strain the evaporator fan and reduce overall efficiency.

You can order ED25PQXDN01 replacement parts from the parts list for this model, or search by model number on Sears PartsDirect.

Last updated: February 2026

Most Whirlpool refrigerators last 10 to 18 years. For your Whirlpool ED25PQXDN01 side-by-side refrigerator, lifespan depends most on compressor run time, door-seal condition, airflow, and defrost performance; keeping those systems healthy is what typically gets you to the upper end of that range.

• Condenser coil cleanliness (dirty coils make the compressor work harder)
• Door gasket seal (air leaks cause longer run times and frost issues)
• Defrost system health (prevents ice buildup that blocks airflow)
• Evaporator fan airflow (moves cold air through the freezer and fresh-food sections)
• Stable temperatures (freezer near 0°F, fridge near 37°F)

• Vacuum coils and the grille area every 6 to 12 months.
• Confirm doors close on their own and seals grip paper all the way around.
• Keep vents inside the cabinet unblocked by food packages.
• Dump old ice and clean the bin periodically to prevent clumps and jams.
• Replace failed cooling or defrost parts promptly to avoid compressor strain.

These parts are often involved when cooling performance drops or frost builds up:

A refrigerator that runs longer than normal (from dirty coils, air leaks, or frost buildup) puts extra load on the sealed system. Reducing run time is the most reliable way to extend the service life of a Whirlpool side-by-side like the ED25PQXDN01.

You can order replacement parts for your ED25PQXDN01 from the parts list for this model, or search by model number on Sears PartsDirect.

Last updated: February 2026