Kenmore 11021182012 washer Parts

The exact cubic-foot capacity for Kenmore washer model 11021182012 is listed in the product specifications in your Use and Care literature; use the 11021182012 owner's manual to confirm the official capacity for your specific washer.

How to find the capacity quickly

Use these spots in the documentation first; they are where Kenmore typically publishes basket volume.

• Look for “Capacity”, “Washer capacity”, or “Basket volume” in the specifications section
• Check the model identification page to confirm you are reading the correct document for 11021182012
• If the manual is organized by topic, check the “Features and benefits” or “Washer use” section for a capacity callout
• For space planning (not capacity), use the 11021182012 installation guide for cabinet dimensions and clearances

Typical capacity range for this style of Kenmore washer

Most Kenmore top-load washers in this design family fall into a standard-to-large capacity range. Use this as a practical guide for load planning while you confirm the exact spec in the manual.

Capacity range (cu. ft.)	Common label	What it comfortably handles
3.0 to 3.6	Standard	Daily mixed loads, towels, smaller bedding
3.7 to 4.3	Large	Bulkier loads, fewer loads per week
4.4 to 5.0	Extra-large	Large households, bigger bedding loads

Why it matters

Capacity affects cleaning and spin performance. Overloading reduces turnover and can increase vibration, which accelerates wear on drive and suspension components.

If you are seeing slipping, weak spin, or shaking with heavier loads, common related parts for this model include the washer drive belt WPW10006384 and suspension W10780048.

Last updated: February 2026

To identify your Kenmore washer model, we look for the model and serial number label on the washer and copy the full model number exactly as shown. For your washer, the model number format looks like 110.XXXXXXXX (example: 11021182012); write every digit clearly.

Where to find the model number label

Most Kenmore top-load washers like model 11021182012 have the model/serial tag in one of these spots:

• Under the lid, along the top rim of the washer opening
• On the underside of the lid
• On the back of the control console (rear of the top panel)
• On the rear panel of the washer cabinet

If you are installing or moving the washer, the paperwork section in the installation guide is also a good place to record the model and serial number for future parts ordering.

How to write the model number correctly

Small character mix-ups are the most common reason parts do not match. Use these checks:

• Write the entire number with no spaces (example: 11021182012)
• Double-check 0 (zero) vs O (letter O)
• Double-check 1 vs I
• Take a clear photo of the label before ordering parts
• Keep the serial number too; it can help confirm production details

Quick examples (what to copy and what not to)

On the label	What we use for parts lookup	Common mistake
11021182012	11021182012	Missing digits (11021182)
110.21182012	11021182012	Including punctuation incorrectly
11021182012	11021182012	Swapping 0 and O

Why it matters

Kenmore washers share similar designs across many 110-prefix models, but parts like the lid lock, drive belt, and actuator can vary by revision. Using the exact model number helps match the correct replacement part the first time.

Last updated: February 2026

Yes, repairing a Kenmore washer is usually worth it when the fix restores reliable washing and spinning for significantly less than replacing the machine. For Kenmore model 11021182012, common wear items like the drive system, lid lock, and suspension are repairable, and the owner's manual helps you confirm symptoms and safe operating checks.

A practical “repair vs replace” checklist

We use these quick checks to decide if a repair makes sense:

• The washer fills, drains, and powers on normally (no burning smell or repeated breaker trips).
• The problem is isolated to a common failure area (spin, agitation, draining, lid locking, excessive vibration).
• The tub and cabinet are in good shape (no severe rust-through or major structural damage).
• The repair cost is well below the cost of a comparable new washer.
• You plan to keep the washer at least 1 to 2 more years.

Repairs that are commonly worth doing on model 11021182012

These issues often have a clear part-based fix:

• Won’t spin or weak agitation: check the washer drive pulley and splutch assembly W10721967 and washer drive belt WPW10006384.
• Lid won’t lock or won’t start: the washer lid lock assembly W10404050 is a frequent cause.
• Won’t drain or leaves water in the tub: the washer drain pump assembly WPW10276397 is a common suspect.
• Banging, walking, or off-balance behavior: worn suspension can point to the suspension W10780048.

Quick cost-to-benefit guide

Use this as a simple way to frame the decision.

Situation	Typical recommendation	Why
One clear failed part (belt, lid lock, pump)	Repair	High success rate, limited labor
Multiple drive or spin components worn	Repair if overall condition is good	Still often cheaper than replacement
Major structural damage (basket/tub/cabinet)	Replace	Parts and labor add up quickly

Why it matters

A washer that cannot lock the lid, drain, or transfer power through the drive system will often stop mid-cycle, leave clothes soaked, or become noisy and unstable. Fixing the root cause protects the gear case, motor, and basket from secondary damage.

Safety notes before you decide

From the installation and safety guidance for this washer type:

• Use two or more people to move the washer to prevent injury.
• Plug into a grounded 3-prong outlet; do not use an adapter or extension cord.
• Keep the washer level; leveling reduces vibration and premature wear.

Last updated: February 2026

Most Kenmore washers, including model 11021182012, last 10 to 15 years with normal household use. How long yours actually runs depends most on load size, how often you wash, and whether the washer stays level and drains properly.

What affects washer lifespan the most

• Overloading (extra strain on the drive system, belt, and gear case)
• Out-of-balance loads (increases vibration and suspension wear)
• Poor leveling (causes shaking and premature component wear)
• Drain issues (standing water stresses the pump and can lead to odors)
• Water quality and detergent use (buildup can affect performance over time)

Practical ways to help your 11021182012 reach the high end of the range

Use these habits to reduce wear on common moving parts like the drive belt, splutch, and suspension:

• Keep loads evenly distributed; wash bulky items in smaller loads
• Avoid consistently washing very heavy loads
• Use the correct cycle and water level for the load
• Periodically check that the washer is level and stable
• Make sure the drain hose is installed correctly and not kinked

Leveling matters (and it is easy to overlook)

The installation instructions for this washer call out leveling feet adjustment and tightening the jam nuts after the washer is level. Following those steps helps reduce vibration that can shorten the life of the suspension and drive components. See the installation guide.

Signs it may be nearing end of life (or needs a key repair)

Symptom	Common cause	Parts often involved on this model
Loud banging or excessive shaking	Worn or weak suspension	Suspension kit
Won’t spin or has weak agitation	Worn drive components	Belt, splutch, actuator
Won’t drain or leaves water in tub	Pump issue or blockage	Drain pump, drain hose
Lid won’t lock or cycle won’t start	Lid lock failure	Lid lock assembly

Why it matters

A washer that is kept level, not overloaded, and draining correctly typically avoids the most expensive wear patterns (drive system strain, vibration damage, and pump failures). That is what most often separates a 10-year washer from a 15-year washer.

Last updated: February 2026