Whirlpool WRF560SEYB00 refrigerator Parts

For your Whirlpool WRF560SEYB00 bottom-mount refrigerator, do not remove the cardboard (or fiberboard) panel on the bottom or rear lower area. That panel is a protective cover and airflow guide for the condenser area; removing it can reduce cooling performance and expose components.

What cardboard should stay in place vs. what to remove

Keep the bottom or rear lower cover installed; remove only shipping materials that are clearly temporary.

• Keep installed: the flat cardboard or fiberboard panel attached with screws or clips (often under the unit or across the lower back)
• Remove: exterior tape, corner blocks, foam spacers, and plastic wrap used for shipping
• Remove: any cardboard placed loosely inside the fresh food or freezer compartments
• Remove: any packing holding shelves, bins, or the ice maker arm in place
• Keep installed: any metal or plastic service cover that protects wiring and the compressor area

Quick checks before you decide

Use these checks to confirm you are looking at a protective cover, not packaging.

What you see	Usually means	What to do
Panel is screwed/clipped on and spans the lower back or bottom	Protective condenser cover/airflow baffle	Leave it installed
Loose cardboard sheet under the unit with no fasteners	Shipping spacer	Remove it
Cardboard inside the cabinet or taped to shelves	Shipping protection	Remove it
Panel blocks access to the compressor and wiring	Safety and airflow protection	Leave it installed

Why it matters

That lower cover helps direct air across the condenser coils and protects the compressor area from dust, pets, and accidental contact. Keeping it in place helps your refrigerator cool efficiently and run more reliably.

Where to confirm for your exact configuration

We recommend checking the cabinet and rear access panel diagrams and any setup notes in the owner's manual.

Last updated: February 2026

A bottom-freezer refrigerator (like Whirlpool model WRF560SEYB00) is usually the better everyday choice because the fresh-food section sits at eye level, so you access the most-used items with less bending. A top-freezer design can be more efficient and simpler, but it is less convenient for daily use.

Quick comparison

Feature	Bottom freezer	Top freezer
Everyday convenience	Better (fresh food at eye level)	Lower (fresh food requires bending)
Typical efficiency	Good	Often very good
Typical repair complexity	Moderate (more features)	Often simpler
Best for	Frequent fresh-food access	Budget, simplicity, fewer features

What we recommend for most homes

If you use the refrigerator section far more than the freezer (most households do), a bottom-freezer layout is the better fit.

• Keeps produce, drinks, and leftovers at a comfortable reach
• Reduces door-open time while you search for fresh-food items
• Works well for families that cook often and store lots of refrigerated food
• Pairs well with common convenience features (ice maker, water filter, air filter)

When a top-freezer can be the better choice

A top-freezer refrigerator can be the better pick when you want maximum simplicity.

• You want a typically lower purchase cost
• You prefer a simpler design with fewer features to maintain
• You use the freezer more often than the refrigerator
• You want a layout that is easy to place in tighter kitchens

Why it matters

The “better” freezer position is mostly about how you live day to day. Bottom-freezer models prioritize ergonomics and fresh-food access; top-freezer models prioritize simplicity and often strong efficiency.

For model-specific use and care details (including temperature settings and feature operation), follow the owner's manual.

Last updated: February 2026

Bottom-freezer refrigerators like the Whirlpool WRF560SEYB00 keep fresh food at eye level, but the tradeoff is more bending and heavier freezer access. They also tend to cost more than basic top-freezer models, and the freezer drawer hardware can wear faster if it is frequently overloaded.

Common disadvantages you may notice

• You have to bend or squat to reach frozen foods in the lower drawer.
• Freezer drawers can feel heavy when fully loaded (more strain on slides, rollers, and door alignment).
• Freezer organization can be harder; items stack and get buried without bins.
• Ice maker and water system issues can be more noticeable if you rely on them daily (clogs, air in lines, slow fill).
• Some kitchens have tighter clearance for pulling the freezer drawer fully open.

What to check on your WRF560SEYB00 to reduce the downsides

Use your WRF560SEYB00 owner's manual to confirm the correct loading, door closing, and temperature settings. These steps help prevent the most common bottom-freezer complaints:

• Keep heavier items low and centered in the freezer drawer to reduce rail wear.
• Make sure the doors seal evenly; poor sealing increases frost and makes drawers harder to open.
• Replace filters on schedule to keep dispenser flow strong and reduce ice maker problems.
• Level the refrigerator so the doors close smoothly and stay aligned.

Parts that commonly help when symptoms show up

If the “disadvantage” you are feeling is really a performance issue, these model-matched parts are often involved:

Symptom you notice	Common cause	Part to consider
Slow water, bad taste, cloudy ice	Clogged water filter	Refrigerator filter EDR1RXD1
Odors in fresh food section	Saturated air filter	Refrigerator air filter W10311524
Ice maker not filling or weak dispenser flow	Water supply control problem	Refrigerator water inlet valve WPW10238100

Why it matters

Most bottom-freezer “cons” come down to ergonomics and wear: frequent heavy drawer use, door sealing, and water filtration. Keeping seals tight and filters fresh helps your Whirlpool refrigerator run colder, waste less energy, and avoid nuisance issues.

Last updated: February 2026