Whirlpool WFE510S0AW0 30" electric freestanding range Parts

Your Whirlpool electric range model number is printed on the model/serial rating plate. On the Whirlpool WFE510S0AW0, you can typically find that plate on the frame behind a top corner of the oven door or on either side of the storage or warming drawer.

Where to look on model WFE510S0AW0

Check these common spots in this order:

• Open the oven door and look on the front frame near the top corners.
• Pull out the storage drawer or warming drawer and check the frame on either side.
• If the drawer is hard to remove, follow the steps in the WFE510S0AW0 installation guide.

What the label looks like (and what to write down)

The rating plate usually includes:

• Model number (example format: WFE510S0AW0)
• Serial number
• Electrical rating (volts/amps/kW), which helps match power cords and wiring

Write the model number exactly as shown; one missing character can lead to the wrong Whirlpool parts.

Quick comparison: oven door vs drawer location

Location	How to access	Best for
Oven door frame	Open the oven door	Fastest check for most ranges
Drawer frame sides	Pull out storage or warming drawer	Common on freestanding ranges

Why it matters

We use the exact model number to match the correct range parts and diagrams for your appliance, including items like a bake element, oven temperature sensor, surface element, or control board.

Last updated: January 2026

On the Whirlpool WFE510S0AW0 electric range, PSH typically indicates the control lock feature is turned on, so the keypad will not accept bake or broil commands. Unlock the controls, then retry your cooking cycle; a quick power reset can clear a stuck lock state.

How to unlock the control panel

Try these steps in order:

• Press and hold CANCEL/OFF (or CLEAR/OFF) for 3 to 5 seconds.
• Watch for LOC to disappear or for a confirmation tone.
• If PSH returns, turn off the range breaker (or unplug if accessible) for 1 minute, then restore power.
• Confirm the oven is in Bake mode and not in a timed or special function.
• If the keypad still will not respond, check for a stuck key (grease or moisture can cause false presses).

For the exact key sequence and indicator behavior for your console, follow the WFE510S0AW0 owner's manual.

Quick checks that help pinpoint the cause

What you see	What it usually means	What to do next
PSH or LOC and keys do nothing	Control lock is enabled	Hold CANCEL/OFF 3 to 5 seconds
PSH comes back after unlocking	Keypad is sensing a press or control is confused	Power reset for 1 minute, clean/dry keypad
Oven heats but display acts odd	Intermittent control issue	Reset power, then test several keys

When a part is likely involved

If the lock will not clear after unlocking and a power reset, the issue is often in the control circuit (keypad/control board) or a temperature-sensing fault that confuses operation.

Common parts we check on this model:

• Range oven temperature sensor WPW10181986 (sensor out of range can cause erratic operation)
• Control board and wiring connections (inspect for loose plugs or heat damage)

Why it matters

Control lock prevents accidental oven operation and unintended temperature changes. When it is stuck on, it can look like the oven has failed even though the heating system is fine.

Last updated: January 2026

A Whirlpool electric range like model WFE510S0AW0 typically lasts 13 to 15 years with normal household use. Keeping the cooktop and oven clean, avoiding frequent high-heat self-clean cycles, and fixing heating or wiring issues early helps you reach (and often exceed) that lifespan.

What affects lifespan the most

• Heat stress: frequent broiling, long bakes, and repeated self-clean cycles accelerate wear on elements and controls.
• Electrical health: loose or overheated connections at the terminal block can shorten component life.
• Door and gasket condition: heat leaks make the oven work harder and can affect temperature stability.
• Spills and boilovers: sugary spills can damage radiant elements and switches if not cleaned promptly.
• Ventilation and leveling: a properly installed, level range runs more consistently (see the installation guide).

Common “end-of-life” symptoms (and the usual fix)

Symptom	Most common cause	Typical repair path
Oven won’t heat or heats unevenly	Failed bake element	Replace the range bake element WPW10308477
Oven temperature is inaccurate	Bad sensor or calibration needed	Test/replace the range oven temperature sensor WPW10181986
Burner won’t regulate heat	Worn infinite switch	Replace the range dual surface element control switch WPW10434452
Range is completely dead or power cord area smells hot	Loose/burned power connection	Inspect/replace the range terminal block WPW10245259

Maintenance that helps you get the full 13 to 15 years

• Wipe up spills after the surface cools; use a scraper designed for glass tops.
• Keep oven racks clean and sliding smoothly to prevent door slams and hinge strain.
• Use self-clean sparingly; choose shorter cycles when you do use it.
• If a burner cycles erratically or the oven struggles to preheat, address it early.
• Review operating and care recommendations in the WFE510S0AW0 owner’s manual.

Why it matters

A range that is heating correctly and holding temperature uses less energy, cooks more evenly, and puts less strain on high-cost parts like control boards, elements, and wiring connections.

Last updated: January 2026