Owner’s manual
Error Codes
What size is Kenmore refrigerator model 79578343802?
Kenmore Elite refrigerator model 79578343802 is a bottom-mount style refrigerator; most units in this Kenmore 795 series are about 33 inches wide, 30 to 34 inches deep, and 67 to 70 inches tall. For the exact cabinet and door-swing dimensions, use the 79578343802 owner's manual.
Measure in inches with the doors closed, then add clearance for airflow and door swing.
- Width: left cabinet side to right cabinet side (do not include the door handles unless you need total clearance)
- Height: floor to top of cabinet (include hinges if they sit above the cabinet)
- Depth: back of cabinet to front of doors (measure again to the front of handles if needed)
- Door swing clearance: space needed so doors open fully and bins slide out
- Ventilation clearance: space behind and above for proper cooling
These ranges help when you are planning a cabinet opening or moving the unit through a doorway.
| Measurement | Typical range | What to double-check |
|---|---|---|
| Width | ~32.5 to 33.5 in. | Handles and trim clearance |
| Height | ~67 to 70 in. | Hinge height and leveling legs |
| Depth | ~30 to 34 in. | Depth to handles and door swing |
Correct sizing prevents installation headaches and performance issues. Too-tight clearances can restrict airflow around the compressor and condenser area, and insufficient door-swing space can keep crisper drawers and freezer baskets from sliding out smoothly.
If your display shows an error while you are setting temperatures after moving or reinstalling, use Kenmore 795 model bottom freezer refrigerator error codes to identify the code and the most common fixes.
Last updated: January 2026
What are the common problems with Kenmore Elite refrigerators?
Common problems on the Kenmore Elite 79578343802 bottom-mount refrigerator include weak or no cooling, frost buildup, water leaks, dispenser issues, and unusual noises. These symptoms usually trace back to airflow restrictions, defrost/drain problems, door sealing issues, or a failing cooling-system component; use the 79578343802 owner's manual to match symptoms to checks.
- Not cooling or warm temps: dirty condenser area, failed fan, or a sealed-system issue
- Frost or ice buildup: defrost system problem or a door not sealing
- Water under the fridge or in the freezer: clogged/iced drain path or drain tube issue
- Door not closing or popping open: hinge/cam wear, door stop issues, or cabinet not level
- Buzzing/clicking/humming: compressor start components, fan noise, or compressor strain
- Confirm settings: refrigerator about 37°F and freezer about 0°F (typical targets).
- Make sure vents are not blocked by food packages.
- Check door seal contact all the way around; look for gaps and condensation.
- Listen for fans: evaporator fan (freezer area) and condenser fan (rear/bottom area).
- Inspect for water/ice at the drain area; clear visible ice and debris.
| Symptom | Likely area | Example part for this model |
|---|---|---|
| Interior lights act up, door alarm issues, fan behavior changes when door moves | Door switch circuit | Lg refrigerator door switch 6600JB1010A |
| Water pooling or recurring ice at the bottom of freezer | Defrost drain path | Refrigerator drain tube 5251JA3003D |
| Clicking at start, intermittent cooling | Compressor start components | (Start relay is a common suspect) |
Catching airflow, drain, and door-seal problems early helps prevent food spoilage, repeat icing, and compressor overwork. A small issue like a clogged drain tube or misaligned door can create bigger cooling and frost symptoms over time.
If you see an error code on the display, use Kenmore 795 model bottom freezer refrigerator error codes to narrow the failure to a system (defrost, fan, sensor, or control).
Last updated: January 2026
Why is my refrigerator not getting cold at the bottom?
If your Kenmore Elite refrigerator model 79578343802 is warm at the bottom, the most common causes are restricted airflow (blocked vents or an iced-up evaporator area) or a dirty condenser section that cannot shed heat. Start with airflow and cleaning checks before replacing parts.
- Set temperatures to typical targets: 37°F fresh food, 0°F freezer.
- Make sure food packages are not blocking interior air vents (cold air must circulate).
- Confirm the freezer is cooling well; weak freezer cooling often shows up as a warm refrigerator section.
- Clean dust and pet hair from the condenser area (heat removal problems reduce overall cooling).
- Check that doors close fully and seals are making contact all the way around.
A bottom-mount design relies on the freezer evaporator and fan to push cold air up into the refrigerator section. If the evaporator area is packed with frost, airflow drops and the refrigerator section can warm.
Signs: reduced airflow from vents, frost on freezer back panel, longer run times.
If the condenser fan is not running or the condenser is clogged, the sealed system runs hotter and cooling performance drops.
- Listen for the fan near the compressor area when the unit is running.
- If the fan is noisy, stalled, or intermittent, the motor can be the issue.
Helpful part to consider for this model: refrigerator condenser fan motor EAU61644105.
A door that is slightly open or a door switch that is not signaling correctly can affect fan operation and temperature stability.
Helpful part to consider for this model: lg refrigerator door switch 6600JB1010A.
| Symptom | Most likely cause | What we recommend first |
|---|---|---|
| Freezer OK, fridge warm | Airflow restriction or frost buildup | Clear vents, check for frost, verify fan airflow |
| Both sections warm | Dirty condenser, fan issue, or sealed system problem | Clean condenser area, check condenser fan |
| Warm bottom only after loading groceries | Blocked vents or overpacked shelves | Reorganize to restore airflow |
When the bottom section is warm, food safety and freshness can be affected quickly. Restoring airflow and proper heat removal usually brings temperatures back to normal without unnecessary part replacement.
For model-specific operating guidance and temperature settings, use the 79578343802 owner's manual.
Last updated: January 2026
What does DH mean on Kenmore Elite refrigerator?
On Kenmore Elite refrigerator model 79578343802, DH typically indicates a defrost heater (defrost) problem, meaning the refrigerator is not completing a normal defrost cycle and frost can build up on the evaporator. Use the 79578343802 owner's manual to confirm the exact display meaning and the recommended reset steps.
- Refrigerator section warming up while the freezer still seems cold
- Frost or ice buildup on the rear freezer panel
- Fan noise changes (fan hitting ice) or reduced airflow
- Water leaking or puddles from a clogged defrost drain
- Power reset: unplug the refrigerator (or turn off the breaker) for 5 minutes, then restore power.
- Door seal check: make sure doors close fully and gaskets are sealing; warm air leaks can worsen frost.
- Airflow check: confirm vents are not blocked by food packages.
- Drain check: if you see water under crispers or in the freezer, the drain may be restricted.
A DH/defrost-related issue is usually tied to one of these areas:
| Likely cause | What it affects | What you may see |
|---|---|---|
| Defrost sensor or wiring issue | Defrost timing and temperature feedback | Repeating DH, heavy frost |
| Defrost heater circuit problem | Melting frost off the evaporator | Frost buildup, warm fresh food |
| Control board issue | Sends power to defrost components | Intermittent or persistent DH |
| Drain restriction | Water removal after defrost | Leaks, ice at freezer bottom |
For this model, a common defrost-related replacement part is the refrigerator defrost sensor assembly 6615JB2005C. If you are also dealing with water pooling, the refrigerator drain tube 5251JA3003D is a frequent fix when the drain path is restricted.
When defrost does not run correctly, frost can block airflow across the evaporator. That forces longer run times, causes temperature swings, and can lead to warm food in the refrigerator section.
- You smell electrical burning, hear repeated clicking, or the unit will not cool
- DH returns quickly after a reset and temperatures keep rising
Last updated: January 2026
