Kenmore 79096012400 electric range Parts

If your Kenmore electric range model 79096012400 is not working, start by confirming the range has power and the controls are not showing an F-code fault. Many “dead oven” complaints come from a tripped breaker, a loose power cord connection, or an electronic control fault that can be cleared.

Quick checks we recommend first

• Check the home breaker; many ranges use a double-pole breaker that can trip on one side.
• Confirm the power cord is fully seated in the outlet (if your installation uses a cord).
• If the display shows an F code (example shown in the guide: F11), press STOP/CLEAR to clear it and retry baking.
• If the clock reset after an outage, reset the clock and then set Bake again (some functions will not start until time is set).
• If surface elements work but the oven will not heat, focus on oven-heating components (bake element, broil element, wiring, control).

Most common causes (and what they look like)

Symptom	Most likely area	What to do next
Entire range dead (no display, no heat)	Power supply, cord block, house wiring	Verify breaker and outlet voltage; inspect connections per the installation guide.
Display beeps and shows F code	Electronic control detected a fault	Clear with STOP/CLEAR; if it returns, follow the 79096012400 owner's manual troubleshooting guidance.
Oven will not bake, broil may still work	Bake circuit	Inspect for visible damage; consider replacing the frigidaire range bake element 316075103 if it is blistered or broken.
Oven light out only	Bulb/socket	Replace the range oven light bulb 316538904 or inspect the socket if the new bulb does not work.

Why it matters

An electric range can appear “not working” even when only one leg of power is lost or the control has latched an error. Confirming power and clearing control faults prevents unnecessary part replacement and helps you target the correct circuit (bake, broil, or control).

Last updated: February 2026

For a Kenmore electric range like model 79096012400, we find the model number on the appliance’s rating label. On most ranges, that label is easiest to spot when you open the oven door or pull out the storage drawer and look along the frame.

Where to look on a Kenmore electric range

Check these common locations in this order:

• Oven door frame area (open the door and look around the front frame)
• Storage drawer opening (remove or fully extend the drawer and look on the frame)
• Lower side trim near the drawer opening
• Back panel (if you can safely access behind the range)

Use a flashlight; the label is often a silver or white sticker with MODEL and SERIAL.

What to write down (so parts match)

Record the information exactly as shown:

• Full model number (all digits and any suffix)
• Serial number
• Brand name (Kenmore)
• Power type (electric range)

Quick example of what you might see

Label field	What it’s used for
Model	Ensures diagrams and parts fit your exact range
Serial	Helps identify production version changes

Why it matters

Kenmore ranges can look identical but use different bake elements, control overlays, or switches. Using the exact model number helps us match the correct replacement part the first time.

For label location illustrations and formatting examples, use the 79096012400 owner's manual.

Last updated: March 2026

The average lifespan of a Kenmore electric range like model 79096012400 is 13 to 15 years with normal household use and basic maintenance. Keeping the oven door seal tight and heating elements in good condition helps the range heat evenly and last longer.

What affects lifespan most

These factors have the biggest impact on how long an electric range lasts:

• High-heat cooking frequency (broiling and self-clean cycles add stress)
• Power quality and tight electrical connections
• Condition of heating components (bake and broil elements)
• Door seal condition (heat loss makes components work harder)
• Spillovers and corrosion around surface controls

Parts that commonly drive “end of life” decisions

If performance drops, these are often the first items to inspect or replace:

• Frigidaire range bake element 316075103 (weak or no bake heat)
• Frigidaire range broil element 316203200 (poor broil performance)
• Frigidaire range oven door seal 316405000 (heat leaking, long preheat times)

Typical symptom-to-part check

Symptom	Common check	Why it matters
Oven won’t heat in bake	Bake element	Restores primary oven heat
Broil is weak or uneven	Broil element	Improves top heat and browning
Long preheat, hot kitchen	Door seal	Prevents heat loss and overwork

Why it matters

Knowing the expected lifespan helps you decide whether a repair is cost-effective. On a range in the 13 to 15 year window, replacing a heating element or door seal is often a practical way to restore performance.

For maintenance and operating tips that reduce wear, follow the guidance in the 79096012400 installation guide.

Last updated: March 2026