Kenmore 58712332F01B dishwasher Parts

Yes. We still support Kenmore dishwasher parts, and for Kenmore model 58712332F01B you can buy common replacement parts like a door latch, water inlet valve, drain pump, and detergent dispenser; match parts by the full model number shown in your 58712332F01B owner's manual.

How to make sure you get the right part

Use the model number 58712332F01B (not just “Kenmore 587”) and confirm the part’s name and identifiers before ordering.

• Match the full model number from the rating label to the parts list
• Compare the part name to the symptom (leak, no fill, no drain, won’t start)
• Check for included hardware (brackets, screws, seals) when applicable
• Replace any disturbed seals or O-rings during reassembly
• Follow shutoff and wiring steps in the 58712332F01B installation guide when removing the dishwasher

Popular parts customers replace on this model

These are examples of parts available for 58712332F01B that often solve common problems:

Symptom	Common fix	Example part for this model
Door won’t latch or unit won’t start	Replace door latch	Dishwasher door latch 5304535183
Dishwasher won’t fill	Replace inlet valve	Dishwasher water inlet valve (model-matched)
Dishwasher won’t drain	Replace drain pump	Dishwasher drain pump (model-matched)
Detergent door won’t open	Replace dispenser	Electrolux dishwasher detergent dispenser assembly (model-matched)

Why it matters

Kenmore dishwashers are built across multiple manufacturing platforms, so parts are model-specific. Using 58712332F01B ensures you get the correct fit, wiring connections, and mounting style for your dishwasher.

Last updated: February 2026

To tell which Kenmore dishwasher you have, we look up the model number and serial number on the rating label (serial plate) located inside the dishwasher, typically just inside the door. For your unit, the model number format matches the 587.1233* series shown in the 58712332F01B owner's manual.

Where to find the model and serial label

On Kenmore dishwashers like model 58712332F01B, the label is inside the tub area and is easiest to see with the door open.

• Open the dishwasher door fully.
• Look along the inner frame of the tub opening (often on the left side or near the door opening).
• Find the sticker or metal plate labeled Model and Serial.
• Write the numbers down exactly as shown (letters and numbers matter).
• Use that full model number when ordering parts such as a door latch, water inlet valve, or drain pump.

What the model number tells you

Your model number is the key to getting the right parts list, diagrams, and instructions.

What you see on the label	What it’s used for
Model number (example: 58712332F01B)	Matching the correct parts and diagrams
Serial number	Identifying production details for service and support
Series pattern (example: 587.1233*)	Confirming the family of Kenmore dishwasher designs

Why it matters

Kenmore dishwashers can look similar across different series, but parts like the dishwasher door latch, detergent dispenser assembly, and wire harness can vary by model. Using the exact model number helps prevent ordering a part that does not fit.

If the label is hard to read

• Wipe the label gently with a damp cloth to remove film.
• Use a flashlight and take a close-up photo to zoom in.
• If the door will not close or latch, inspect the dishwasher door latch 5304535183 because a misaligned or failing latch can make identification and operation harder.

Last updated: February 2026

On a Kenmore dishwasher, error code F2E2 means the user interface (keypad) is not communicating correctly with the main control, so button presses may not respond or the cycle may stop. For model 58712332F01B, we use the troubleshooting and reset steps in the 58712332F01B owner’s manual.

What you can do first (quick checks)

• Press Start/Cancel to turn the unit off, then wait about 1 minute and try a normal cycle again.
• Make sure no keys are stuck; wipe the console with a soft, slightly damp cloth and dry it.
• Turn off power at the breaker for 2 minutes, then restore power and retry.
• If the dishwasher was recently installed or moved, confirm the unit is fully secured and not flexing when you press keys (movement can stress wiring).
• If the code returns immediately, plan on inspecting the console and control connections.

Likely causes and what they mean

Likely cause	What you’ll notice	Typical fix
Loose or oxidized connector between UI and control	Code comes and goes, random beeps	Reseat connectors, check for corrosion
Damaged wire harness	Works until door moves, then fails	Repair/replace harness
Failed user interface (keypad/console)	Certain keys never work	Replace console/UI
Failed main control board	Multiple odd behaviors	Replace control board

When to check parts

If the dishwasher also will not start because the door is not registering as closed, check the latch first. A weak latch can cause intermittent operation that looks like an electronic problem.

• Consider inspecting the dishwasher door latch 5304535183 for wear, binding, or a loose mounting.

Why it matters

F2E2 is a control communication fault; continuing to run cycles can lead to mid-cycle stops, poor cleaning, and repeated resets. Fixing the connection or the failed control component restores reliable keypad response and normal cycle operation.

Last updated: February 2026