White-Westinghouse Generator Parts — Browse All Models

Troubleshooting your White-Westinghouse generator when no AC output current is available while the generator is running

Check the circuit breakers on the generator to see if a breaker tripped. Reset any tripped circuit breakers.

The device that you're trying to power up may be bad. Try plugging a different device into the generator.

Check the power cord for the device that you're trying to power. Replace the power cord or extension cord if it's frayed or damaged.

Shut off the generator and check wiring connections in the generator. Reconnect any loose wires and repair any broken wires.

Replacing the spark plug in your White-Westinghouse generator's engine

• When the engine is cool, disconnect the spark plug wire from the spark plug.
• Use a spark plug wrench to loosen and remove the spark plug.
• Use a spark plug gap tool to set the gap between the center electrode and the ground electrode. The gap specifications for your model are in the owners manual.
• Thread the spark plug into the engine. Then tighten the spark plug with a spark plug wrench. Reconnect the spark plug wire.