Lawn & Garden Equipment Engine Fuel Filter (replaces 2173206, 2173206SM, 394358, 692064, 7014359, 7014359YP, 75213, BS-394358S) 394358S

Eureka ...It fits! A rarity these days it seems.

Easy to install. Be ready with some type of small pan to catch the residual gas that will pour from the fuel lines once the filter is removed. Then loosen the two clips at either end of the filter and pull the fuel line off the two filter nipples. This may take some effort as they don't remove easily. Be gentile but firm, and that will loosen them without loosening or breaking anything else. When you take the fuel line off from the filter which goes to the gas tank (the other side goes to the carburetor) just point the line up, so that the gas tank will not empty from the removed fuel line. When installing the new filter just pay attention to the direction of the filter when you remove it. The position of the filter should be the same installing it as when you removed it. DO NOT INSTALL IT BACKWARDS!! The rounded portion of the filter should point in the direction of the engine. Reposition your clips and you are locked and loaded. Happy Mowing!!

Ease of Installation

Easy

Duration of Installation

Less than 30 minutes

Yes, I would recommend this to a friend

I would buy this part again.

As soon as I get it I it should work great.

Ease of Installation

Moderate

Duration of Installation

30 minutes - 1 hour

Yes, I would recommend this to a friend

Fuel filter replacement.

Exact replacement, Squeeze the hose clamps with a pair of pliers and the old one came right off. the new one slipped right on in its place. Easy-peasy!

Ease of Installation

Very Easy

Duration of Installation

Less than 30 minutes

Yes, I would recommend this to a friend

Direct Repacement

Direct replace of OEM filter. Loosen the fuel hose clamps and just swap out the old filter for the new. Keep in mind the fuel flow direction on the old filter. A little messy, have some paper towels handy, but easy.

Ease of Installation

Easy

Duration of Installation

Less than 30 minutes

Yes, I would recommend this to a friend

Parts Direct delivers

Part was an exact match with original. Ordering was easy, and part arrived quickly.

Ease of Installation

Very Easy

Duration of Installation

Less than 30 minutes

Yes, I would recommend this to a friend

Easy to Install

The filter was easy to install. You do need to make sure that you have a container to pour the gas into when you disconnect the old filter from the tubing.

Ease of Installation

Very Easy

Duration of Installation

Less than 30 minutes

fits Perfect

Filter was correct. Fuel lines were of a thicker gauge then the ones I was replacing, so the clamps sold were too small for the fuel lines purchased. Had to use small hose clamps.

Ease of Installation

Very Difficult

Duration of Installation

More than 2 hours

Easy to install

only took 5 minutes to install. Little hard to get to fuel tank.

Ease of Installation

Very Easy

Duration of Installation

Less than 30 minutes