$96.74 |
9% OFF Phone Price : $106.74
CONFIRM THE PART FITS
Dryer Drive Motor (replaces 134156500, S131560100) 131560100
Part #131560100
Online Only Price
$194.63 |
5% OFF Phone Price : $204.63
In Stock
For ZIP codes near Edit
This part fits
Part Information
Dryer drive motor 131560100 is an original equipment manufacturer (OEM) part that fits some gas and electric dryers in these series: Kenmore 417; Frigidaire AEQ, AGQ, CER, CGR, CRE, CRG, FDE, FDG, FER and FGR; and Crosley BEQ, CDE and CDG.
Dryer drive motor 131560100 rotates the drum belt and drum, as well as the blower wheel producing airflow through the drum.
This drive motor is rated at 1/4-horsepower and requires a 120-volt, 60-Hz power supply. Replaces original dryer drive motor part 134156500.
Frequently Used Together
- $14.76 |26% OFF MSRP : $20.00
- $47.89 |9% OFF Phone Price : $52.89
- $28.62 |16% OFF MSRP : $34.00
- $55.00
- $31.27 |14% OFF Phone Price : $36.27
- $7.54 |12% OFF Phone Price : $8.54
- $58.75 |8% OFF Phone Price : $63.75
- $25.22 |17% OFF Phone Price : $30.22
- $32.07 |13% OFF Phone Price : $37.07
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #LGQ2152EE2 Frigidaire dryer | LGQ2152EE2 | Motor |
| Model #FCGD3000ES1 Frigidaire dryer | FCGD3000ES1 | Motor |
| Model #41774182301 Kenmore dryer | 41774182301 | Motor |
| Model #GLGQ2152EE2 Frigidaire dryer | GLGQ2152EE2 | Motor |
| Model #LGQ2152EE3 Frigidaire dryer | LGQ2152EE3 | Motor |
| Model #AGQ6700FE2 Frigidaire dryer | AGQ6700FE2 | Motor |
| Model #FGQ1442FE2 Frigidaire dryer | FGQ1442FE2 | Motor |
| Model #CDEC400FW1 Crosley dryer | CDEC400FW1 | Motor |
| Model #AGQ8000FG2 Frigidaire dryer | AGQ8000FG2 | Motor |
| Model #AGQ8000FE1 Frigidaire dryer | AGQ8000FE1 | Motor |
Reviews
was easy to install
It took less than an hour. On line instructional videos were perfect.
Steve, Simi Valley, Ca
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Was noisey and out of balance
This was to be the third motor for this dryer (I'm a cheap DIY'er). I was replacing it because like the original motor, the second motor had started making a ton of bearing noise. The second motor quieted everything down and has been working fine for about two years. This one made just as much noise as the bad one as soon as we put it in. I returned it - cudos to Sears Parts Direct for easy, fast returns.
Mark, Montgomery, AL
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Dryer motor, exhaust fan housing install.
Fairly easy install once you pull the dryer out into an open workspace.
Gordon 6, Columbia, SC
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Fairly easy to install
I took time to do it right. Needed a good socket to unscrew the fan from the motor shaft. I spent a total of about 2 hours doing this including cleaning all the 14 years of lint dust from the dryer, but everything was straight forward to accomplish.
Johnak, Boulder, CO
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 1 - 2 hours
Quick and easy
Everything just went right into place. Took longer to pull out the dryer.
Bill31, Reedsburg,WI
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Easy to do
Four screws and one spring, easy, vacuum the lint from machine before reassembly
Beaver J, Caribou, me.
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
easy to install , and run like new again.
less then a half hour install time. great time to clean out the inside of the dryer.
Bowse, wi
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
R/R Dryer Drive Motor
Pretty straight forward. Never had to tackle a dryer repair before but I would consider myself above an every day diyer. Just remember when removing the fan that it is left hand threads. I also had to put some blue loctite on the fan when I reinstalled because it wanted to continuously spin off. After that all fine. Other recommendation is pull the drum out. It will save you a lot of frustration.
MrTravelDog, San Antonio, Tx
1 person thought this review was helpful.
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour