$19.56 |
9% OFF Phone Price : $21.56
CONFIRM THE PART FITS
Part Information
This carburetor (part number 753-05908) is for leaf blowers.
Carburetor 753-05908 mixes air and gas before the fuel mix goes to the engine.
Work in a well-ventilated area when installing this part. Drain the fuel tank and disconnect the spark plug wire before beginning the repair.
Frequently Used Together
- $21.16 |19% OFF Phone Price : $26.16
- $74.45 |17% OFF MSRP : $90.00
- $64.52 |10% OFF Was : $71.69
- $14.98 |12% OFF Phone Price : $16.98
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #316794831 Craftsman gas leaf blower | 316794831 | Short block/air cleaner/muffler |
| Model #41CS4ESG799 MTD gas leaf blower | 41CS4ESG799 | Short block/air cleaner/muffler |
| Model #41AS4SCG799 MTD gas leaf blower | 41AS4SCG799 | Muffler/carburetor/flywheel |
| Model #41BS4SCG799 MTD gas leaf blower | 41BS4SCG799 | Short block/air cleaner/muffler |
| Model #41AS4ESG099 MTD gas leaf blower | 41AS4ESG099 | Short block/carburetor |
| Model #316794711 Craftsman gas leaf blower | 316794711 | Short block/carburetor |
| Model #316794611 Craftsman gas leaf blower | 316794611 | Short block/air cleaner/muffler |
| Model #41AS4ESG799 MTD gas leaf blower | 41AS4ESG799 | Short block/air cleaner |
| Model #316794610 Craftsman gas leaf blower | 316794610 | Shortblock/air cleaner |
| Model #41BS4ESG799 MTD gas leaf blower | 41BS4ESG799 | Shortblock/air cleaner |
Reviews
needed craftsman part for blower
perfect fit, timely delivery , and purrs like a kitten now.
steve, waterford NJ
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Carburetor replacement
Order came in quickly, even though they forecasted a more later time. Easy to install.
Scot01, Hampton Rhodes VA
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Easy to Install
This carburetor is a direct replacement part and is fairly easy to install. It didn't include any instructions or precautions, but removal of the old carburetor and installation of the new one is pretty straightforward. The new carburetor did not include a new o-ring that fits over the barrel of the carburetor where it mates to the air cleaner, but the original carburetor o-ring was fine and I reused it. I primed the new carburetor and it fired right up and ran just fine. Total time for the installation and test run was about 20 minutes.
John M, Chicagoland
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Carburetor, Air Filter, Spark Plug
Carburetor and Air Filter easy to change in approximately 30 minutes, however Spark Plug did not fit. Needed a16mm nut and was sent a 3/4' nut Spark Plug. Larger size Spark Plug will not fit in cowling of Blower. Will not send Spark Plug back because of cost of shipping more than cost of Spark Plug.
Forfred41, San Antonio, Texas
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Leaf blower carburetor installation
This part was very easy to install. I did not refer to any service instructions as none were needed. I simply removed the air cleaner cover by unlatching it and opening it back as far as it would go, disengaging its hinges from the main body. Then I removed two screws (both the same size, which avoids incorrect reassembly) and the carburetor was free of the engine block. The throttle cable connection came free when the carb was removed. There were two fuel lines, a feed and a return, which needed a firm pull with needlenose pliers to disconnect. The lines are color-coded to assist with correct reassembly. The leaf blower manufacturer thoughtfully included some barb connectors at an easily accessed location in the lines - otherwise I would have had to further disassemble the unit to disconnect the old lines and reconnect the new ones. The new lines needed about an inch cut off so they would route neatly - a simple task for a pocketknife or scissors. The throttle cable connection was remade easily, and the parts bolted back together with no trouble. The leaf blower started up after about ten primer-bulb squeezes and four or five pulls on the starter rope. Another fine tool was saved from the landfill!
Seki, Palmdale, CA
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- Less than 30 minutes
easy to install
it was easier than i though to install.had to usr old gas lines.
jim c, valrico,fl
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour