$19.56 |
9% OFF Phone Price : $21.56
CONFIRM THE PART FITS
Part Information
This carburetor (part number 753-05133) is for line trimmers.
Carburetor 753-05133 mixes air and gas before the fuel mix goes to the engine.
Wear work gloves to protect your hands and work in a well-ventilated area during this repair.
Frequently Used Together
- $15.56 |18% OFF MSRP : $19.00
- $69.13 |23% OFF MSRP : $90.00
- $64.52 |10% OFF Was : $71.69
- $14.98 |12% OFF Phone Price : $16.98
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #41BDT20C711 Troybilt gas line trimmer | 41BDT20C711 | Engine |
| Model #31679112-2008 Craftsman gas line trimmer | 31679112-2008 | Cylinder/flywheel/fuel tank |
| Model #YM70SS MTD gas line trimmer | YM70SS | Cylinder/flywheel/fuel tank |
| Model #31679111-2008 Craftsman gas line trimmer | 31679111-2008 | Cylinder/flywheel/fuel tank |
| Model #YM20CS MTD gas line trimmer | YM20CS | Cylinder/flywheel/fuel tank |
| Model #41ADY20C901 MTD gas line trimmer | 41ADY20C901 | Cylinder/flywheel/fuel tank |
| Model #41ADY70C901 MTD gas line trimmer | 41ADY70C901 | Cylinder/flywheel/fuel tank |
| Model #7106438 Ace gas line trimmer | 7106438 | Cylinder/fuel tank |
| Model #7115603 Ace gas line trimmer | 7115603 | Muffler/cylinder/flywheel |
| Model #41ADZ21C799 MTD gas line trimmer | 41ADZ21C799 | Cylinder/flywheel/fuel tank |
Reviews
Takes time but cheaper than a new weedeater
This started because the priming bulb wouldnt draw suction anymore. Couldn't tell if it was a clogged carb or fuel filter assembly. Vacuum was drawn without fuel, but with fuel it wouldnt work. Ordered the replacement because I couldn't get either a filter or carb rebuild kit individually so it was a new carb assembly. Install of the carb is straight forward. Getting the fuel line in the tank and threaded in the hole was not. Had to pull the barbed filter off and pull the gas tank off. A little grease on the hose and pushing it in from outside the tank worked well. I pulled the fuel line out through the top of the gas tank and reinstalled the filter/pickup assembly and reassembled the entire thing. It started right up and worked fine. All in all, about 40 minutes start to finish to do this job and I kept a weedeater that I like.
Kitsap J, Bremerton, WA
2 people thought this review was helpful.
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour