Kenmore Elite 66513323K605 drawer dishwasher Parts

Yes. We still carry replacement parts for Kenmore dishwashers, including the Kenmore Elite 66513323K605 drawer dishwasher, as long as the specific part is available for your exact model. The fastest way to match the right part is to use your model number and the diagrams and part lists in the 66513323K605 owner's manual.

We recommend confirming the model number and then matching the part by location in the diagram (not just by description).

• Verify the full model number on the rating label: 66513323K605
• Use the exploded-view diagrams to identify the exact component
• Match by part ID and part number when both are shown
• Compare your symptom to the part’s function (fill, drain, wash, dry)
• If your dishwasher is a drawer style, confirm whether the part is for the drawer/lid area or the base

For this model, some commonly ordered items include components tied to filling, washing, drying, and safety.

Kenmore parts availability is model-specific. Using the exact model number (66513323K605) and the correct part ID prevents ordering a look-alike part that will not fit, especially on Elite drawer dishwasher designs.

You can order parts shown for Kenmore Elite 66513323K605 directly from the parts list for this model, or search by model number on Sears PartsDirect if you are shopping for additional Kenmore dishwasher parts.

Last updated: February 2026

For your Kenmore Elite drawer dishwasher, the model number is printed on the appliance’s rating label; on model 66513323K605, it’s typically located around the drawer opening area (along the inner frame or side wall) where it’s visible when you pull the drawer out. Use the exact model number to match the correct parts list and diagrams.

Check these common label locations (in this order):

• Along the inner side wall of the drawer opening (left or right)
• On the front frame lip that the drawer closes against
• On the inside edge of the drawer front (visible with the drawer open)
• Behind the toe kick or lower access panel area
• On the cabinet frame near the latch area

For model-specific label illustrations and wording, use the 66513323K605 owner's manual.

Record the full model number exactly as shown on the label.

Kenmore Elite dishwashers can use different components across close model variations. Using the exact model number helps us match the right items such as a dishwasher water inlet valve, thermal fuse, thermostat, or wash arm without guesswork.

Once you have the model number, order from the parts list for this model, or search by model number on Sears PartsDirect.

Last updated: February 2026

Yes, repairing a Kenmore Elite drawer dishwasher like model 66513323K605 is worth it when the fix is a common wear part or a single failed component and the total repair cost stays well below the price of replacement. It is usually not worth it when multiple major electrical or water-handling parts fail at the same time.

Use this quick rule for dishwashers:

• Worth repairing: repair cost is under 50% of replacement cost
• Borderline: 50% to 70% (repair only if the unit is in great condition)
• Not worth repairing: over 70%, or repeated breakdowns

We recommend doing these checks first because they prevent unnecessary part replacement:

• Confirm the home breaker is not tripped and the dishwasher has power.
• Check for obvious leaks, standing water, or a burning smell (stop and disconnect power if present).
• Inspect the wiring and connectors for corrosion or loose terminals.
• Clean filters and check for clogs that can mimic pump or fill problems.
• Review diagnostic and operating guidance in the owner's manual.

A drawer dishwasher has more seals, lid components, and control-driven functions than many standard tub models, so one failed part can cause multiple symptoms. A structured diagnosis helps you avoid replacing high-cost parts when the real cause is a fuse, connection, or airflow issue.

For model 66513323K605, we recommend matching parts by model number first, then confirming the part name and ID from the parts list. You can order from the parts list for this model, or search by model number on Sears PartsDirect.

Last updated: February 2026

Common Kenmore dishwasher problems include not draining, not filling, poor cleaning, leaks, and no heat or no power. On the Kenmore Elite drawer dishwasher model 66513323K605, these symptoms often trace back to water-inlet issues, wash circulation problems, airflow and drying faults, or an electrical safety device opening; use the 66513323K605 owner's manual to match symptoms to the correct checks.

• Won’t start or seems dead: blown thermal fuse, control issue, or a lid/door not sealing correctly
• Won’t fill or fills slowly: water supply problem or a failing inlet valve
• Won’t drain or leaves water behind: restricted filter path or drain restriction
• Dishes come out dirty: wash arm blockage, manifold restriction, or low water fill
• Poor drying or moisture left inside: venting or fan airflow problem
• Stops mid-cycle or overheats: thermostat or fuse reacting to abnormal temperature

These are examples of parts on this 66513323K605 parts list that often relate to the symptoms above:

• Confirm the dishwasher has power at the outlet and the breaker is on.
• Verify the water shutoff valve is fully open and the supply line is not kinked.
• Clean the filter area and remove debris that can restrict draining.
• Check the wash arm for clogged spray holes and free movement.
• If the unit is completely dead, test the thermal fuse with a meter before replacing other components.

Dishwasher symptoms overlap; for example, a low-fill condition can look like a wash problem, and a venting failure can look like a heating problem. Narrowing the symptom first helps you avoid replacing the wrong part and gets your Kenmore Elite 66513323K605 back to normal cleaning and drying faster.

If you need to purchase replacement parts, we recommend ordering directly from the parts list for model 66513323K605, or searching by model number on Sears PartsDirect.

Last updated: February 2026