Kenmore 66595014102 electric range Parts

Kenmore model numbers are structured so the first 3 digits identify the manufacturer behind the Kenmore brand, and the remaining digits narrow down the exact product family and feature variations. For your Kenmore electric range model 66595014102, the 665 prefix is the key manufacturer identifier.

Most Kenmore model numbers follow this pattern:

• Prefix (first 3 digits): manufacturer code (example: 665)
• Middle digits: base design or series (helps group similar ranges)
• Ending digits: feature, color, or production variation (helps match the exact parts list)

To see how your full model number is presented and where the model/serial label is located on the appliance, use the 66595014102 owner's manual.

The prefix helps us match you to the correct parts diagrams and compatible components (like a bake element, oven sensor, or surface element switch). Even small digit changes after the prefix can point to different wiring, controls, or cooktop configurations.

• Copy the model number exactly as shown on the model and serial number label
• Include every digit (and any letters, if present)
• Use the full model number when searching parts, not just the 665 prefix
• Compare your label to the format shown in the 66595014102 installation guide

Using the complete model number prevents ordering the wrong Kenmore range parts, especially for high-variation items like heating elements, door latches, and electronic oven controls.

Last updated: January 2026

On the Kenmore electric range model 66595014102, the model number is on the model and serial rating plate located on the oven frame behind the storage drawer panel. Pull the storage drawer out to see the label; write down both the model and serial number for parts and service.

• Turn the range off and let it cool completely.
• Pull the storage drawer straight out; lift slightly if it stops on the drawer stops.
• Look at the oven frame behind the drawer opening for the model/serial rating plate.
• Record the model number and serial number exactly as shown.
• Use that full model number when ordering parts like a bake element or oven sensor.

If the rating plate is damaged or unreadable, these are other common places Kenmore ranges may have an ID label:

• Door jamb area (along the oven frame when the door is open)
• Back panel near the power cord entry
• Side frame behind the lower access area

Kenmore 665-series ranges often share similar designs, but parts can vary by revision. Using the exact model number from the rating plate helps us match the correct components and avoid returns.

For additional identification details and appliance features, check the 66595014102 owner's manual.

Last updated: January 2026

For Kenmore electric range model 66595014102, the most reliable “reset” for the oven control board is a full power cycle: turn the range off, shut off the circuit breaker (or unplug), wait 5 to 10 minutes, then restore power and clear the display. See the 66595014102 owner's manual.

• Turn the oven off using OFF/CANCEL.
• Switch the range breaker OFF (or unplug the cord).
• Wait 5 to 10 minutes to let the electronic oven control fully discharge.
• Restore power.
• If the display is flashing or shows a power failure message, clear the display and reset the clock as needed.
• If an error code returns after the reset, stop using the oven and schedule service.

This model can lock out the control panel. If you see “Loc” and a lock icon, unlock it:

• Press and hold OVEN for 5 seconds.

A power cycle clears many temporary electronic oven control glitches caused by a power failure or a stuck keypad signal. If the same error code reappears, the issue is usually a failing sensor circuit, wiring, or the control itself.

If the oven won’t regulate temperature or repeatedly throws temperature-related faults, a common repair path is checking the oven temperature sensor and its wiring.

• Oven sensor WPW10181986

Last updated: January 2026

On the Kenmore 66595014102 electric range, removing the “top” depends on whether you mean the cooktop surface or the whole range top panel. We start by shutting off power, then releasing the fasteners or retaining brackets that hold the cooktop in place, and lifting it safely.

• Turn off the range at the breaker; do not rely on the control knobs.
• Let all surface elements cool completely.
• Pull the range forward carefully to protect the floor.
• Confirm the anti-tip bracket is engaged when you move the range back.
• Use gloves; sheet metal edges can be sharp.

For moving and leveling guidance (including anti-tip details), follow the 66595014102 installation guide.

Most Kenmore electric ranges use one of these setups:

• Disconnect power.
• Remove burner knobs (if they block access to trim or screws).
• If you have coil elements, pull the element straight out of the receptacle; release any retaining brackets.
• Remove the screws along the underside of the front edge (often accessed by opening the oven door).
• Lift the cooktop from the front and prop it securely (do not strain wiring).

A non-heating oven or uneven baking is often tied to a failed bake circuit or temperature sensing issue. These model-matched parts are common fixes:

• Bake element WPW10308477 (if the oven will not heat or heats weakly)
• Oven sensor WPW10181986 (if temperatures are inaccurate or you see temp-related faults)

Removing the top correctly prevents broken glass, pinched wires, and anti-tip hazards. It also gives you safe access to surface element wiring, switches, and mounting hardware.

Last updated: January 2026