Maytag MFX2571XEM3 refrigerator Parts

Bottom-freezer refrigerators like the Maytag MFX2571XEM3 put fresh food at eye level, but the tradeoffs are higher purchase cost, more bending to reach frozen items, and deep freezer drawers that can be harder to keep organized. For model-specific features and care tips, use the MFX2571XEM3 manual.

• More bending and lifting: You reach down for frozen foods, and heavy items (meat, bulk bags) often sit in the bottom basket.
• Freezer organization can be tougher: Deep drawers can hide smaller items unless you use bins or dividers.
• Freezer access can feel slower: Pull-out drawers take more steps than a swing door for quick grabs.
• Often higher upfront cost: Bottom-freezer designs typically cost more than comparable top-freezer models.
• More parts involved in the freezer section: Drawer rails, baskets, and door seals add wear points over time.

• Keep “daily-use” frozen items in the upper basket; store bulk items below.
• Use 2 to 4 small bins to group foods (breakfast, veggies, proteins, snacks).
• Check door sealing and alignment if you see frost or temperature swings; worn gaskets can waste energy.
• If you’re troubleshooting cooling or airflow, start with basic maintenance and then follow the diagnostic steps in the MFX2571XEM3 manual.

The “best” layout depends on how you cook and shop. If you use the refrigerator section far more than the freezer, a bottom-freezer model can feel more convenient day to day. If you access frozen foods constantly, the extra bending and drawer organization can become the main drawback.

If you’re maintaining or repairing your MFX2571XEM3, you can find model-matched replacement parts and diagrams on this page, or search by model number on Sears PartsDirect.

Last updated: February 2026

On a Maytag MFX2571XEM3 refrigerator, the “bottom part” most people mean is the compressor area (the sealed-system compartment) located at the lower rear of the cabinet; it houses the compressor and related cooling components. For your model’s component locations and access panels, use the MFX2571XEM3 owner's manual.

Depending on what you’re looking at, the bottom section can refer to different parts:

• Compressor compartment (lower back): compressor, condenser fan, condenser coil
• Machine compartment cover (rear lower panel): the access cover you remove for service
• Freezer compartment (bottom drawer on bottom-mount units): slides, rails, baskets
• Toe grille (front bottom trim on many refrigerators): air intake and cosmetic cover

If you’re troubleshooting noise, heat, or poor cooling, these are the usual suspects in the lower rear area:

• Compressor (runs the refrigeration cycle)
• Condenser fan motor (moves air across the condenser)
• Condenser coil (releases heat)
• Run capacitor and start components (help the compressor start and run)

Calling the correct “bottom part” helps you diagnose faster. A warm lower rear area is normal during operation, but loud buzzing, clicking, or no cooling often points to the compressor compartment components.

If you’re ordering a replacement, we list model-matched parts for Maytag MFX2571XEM3 on the parts list for this model, and you can also search by model number on Sears PartsDirect.

Last updated: February 2026

Ice on the bottom of your Maytag MFX2571XEM3 bottom-mount freezer happens when the defrost drain clogs; defrost water cannot flow to the drain pan, so it refreezes on the freezer floor. Use the MFX2571XEM3 owner's manual for access and safety steps.

During defrost, frost melts off the evaporator and should run through a drain trough and tube to the pan underneath the refrigerator. When that drain path is blocked by ice or debris, water backs up and freezes into a sheet at the bottom.

• Look for a solid ice slab on the freezer floor under the drawer.
• Check the drain area behind the rear freezer panel for an ice plug.
• Confirm the freezer door closes fully and the gasket seals all the way around.
• Make sure food packages are not blocking air vents (restricted airflow increases frost).
• Verify temperature settings are normal (overly cold settings can worsen refreezing).

1. Unplug the refrigerator.
2. Remove food and the freezer drawer; place towels to catch meltwater.
3. Melt the ice with warm (not boiling) water; a turkey baster works well.
4. Flush warm water into the drain until it runs freely to the drain pan.
5. Recheck in 24 hours; repeat flushing if slow drainage returns.

Use this symptom guide to narrow the cause:

If airflow is weak or the fan is noisy, a common repair is replacing the evaporator fan motor; see refrigerator evaporator motor W11529245.

A clogged drain can lead to water leaks, a sticking freezer drawer, and temperature swings that affect food quality.

For broader parts searching beyond this model’s parts list, use Sears PartsDirect.

Last updated: February 2026