Kenmore 10671292100 top-mount refrigerator Parts

For Kenmore top-mount refrigerator model 10671292100, we recommend 1/2 inch of clearance at the top (and 1/2 inch on each side) to maintain proper ventilation and cooling performance; allow more space when the refrigerator sits next to a fixed wall or has an ice maker. See the owner's manual for the ventilation diagram and placement notes.

• Top: 1/2 in. (1.25 cm)
• Each side: 1/2 in. (1.25 cm)
• Next to a fixed wall: 2 in. (5.08 cm) minimum on the wall side(s) so doors can swing open
• Back (typical): plan for about 1 in. (2.5 cm) so the cabinet can breathe and you can service/clean behind it
• With an ice maker: leave extra room at the back for the water line connection

Your refrigerator removes heat through airflow around the cabinet and condenser area. When the top or sides are too tight, heat cannot dissipate efficiently, which can lead to longer run times, warmer temperatures, and moisture issues.

• Keep vents inside the freezer and fresh-food sections clear of food packages.
• Avoid installing near ovens, radiators, or other heat sources.
• Pull the refrigerator straight out when moving it to protect floors.
• If you need to clean coils, leave enough room to pull the unit out safely.

Last updated: February 2026

In a Kenmore 10671292100 top-mount refrigerator, the top compartment is the freezer. It’s the section designed to keep foods frozen and it also supplies cold air that circulates down into the fresh-food (refrigerator) compartment.

The freezer is more than just storage for frozen food; it helps the whole refrigerator maintain stable temperatures.

• Keeps food at freezing temperatures for long-term storage
• Sends cold air through vents to help cool the refrigerator section
• Houses freezer features like shelves, door bins, and the freezer floor
• Often contains the ice maker area (if your model is equipped)

Your Kenmore 10671292100 relies on airflow between the freezer and refrigerator sections. Blocking vents can cause warm temperatures, frost, or moisture issues.

• Keep packages away from freezer vents and the top vent into the refrigerator section
• Avoid overpacking the freezer; leave space for air to circulate
• If you see icicles or frost patterns, check for blocked vents first

Here are typical terms used for the “top part” in manuals and parts diagrams.

If the freezer is cold but the refrigerator section is warm, airflow is usually the first thing to check (blocked vents, frost buildup, or a fan issue). For feature locations and care steps like light bulb access, use the owner's manual.

Last updated: February 2026

Kenmore model 10671292100 was manufactured by Whirlpool. The “106” prefix is the manufacturer code used on many Kenmore refrigerators to identify Whirlpool as the builder.

You can verify the manufacturer code directly from the model and serial tag on the cabinet (usually inside the fresh food section).

• Locate the model/serial label inside the refrigerator compartment
• Confirm the model number is 10671292100
• Note the first three digits (106) as the manufacturer code
• Use the code when looking up parts diagrams and compatible replacement parts
• Keep the full model number handy for ordering parts and checking specifications

Even though Whirlpool built the unit, you should still match parts by the full Kenmore model number to ensure fit.

These are examples of part types that often come up on Whirlpool-built Kenmore top-mount refrigerators:

• Ice maker components (example: ice maker assembly - refrigerator ice maker by whirlpool 4317943)
• Water inlet valve and water tubing
• Door gaskets and door alignment hardware
• Defrost system parts (timer, defrost thermostat)
• Light switch and refrigerator bulb

Knowing Whirlpool built Kenmore 10671292100 helps when you are comparing designs, troubleshooting patterns, and selecting the right replacement parts, but the full Kenmore model number remains the most accurate way to match parts and instructions.

Last updated: February 2026