Kenmore 91193311010 30" electric freestanding range Parts

To reset your Kenmore 91193311010 electric range, turn the oven control knob to OFF, then disconnect power to the range for at least 30 seconds and restore power. This clears many control glitches and is the recommended reset step after an “F” function error code (or after a power interruption).

Reset steps (control reset)

• Turn the OVEN CONTROL knob to OFF.
• Unplug the range, or switch OFF the range breaker.
• Wait 30 seconds (minimum).
• Restore power.
• Retry the oven function you were using (Bake, Broil, Timer).
• If the display shows PF after power returns, reset the clock per the owner's manual.

If you see an “F” code or beeping

An “F” followed by a number indicates a function error. Resetting power is the first step.

What you notice	What to do next	Why it helps
Display flashes F + number and beeps	Power reset for 30 seconds	Clears a stuck control state
F code during self-clean	Check door latch is fully to the right, let oven cool 1 hour, retry	Latch position can trigger errors
Problem repeats after reset	Stop using self-clean and schedule service	Prevents repeated overheating or latch damage

Why it matters

A proper reset restores normal operation after a power failure (often shown as PF) and after many temporary electronic control faults. It also helps you avoid unnecessary part replacement when the issue is only a control lockup.

Last updated: February 2026

Your Kenmore range model number is printed on the appliance ID label; for Kenmore model 91193311010, the owner's manual confirms the model and serial tag is located on the front frame behind the storage drawer. Pull the drawer out and look for the model and serial number fields.

Where to look on a Kenmore freestanding electric range

On this 30-inch Kenmore freestanding range style, the most reliable locations are:

• Behind the storage drawer: look on the front frame (most common)
• Oven door frame area: check the front frame when the door is open
• Back panel: sometimes the rating plate is on the rear of the range
• Under the cooktop (lift-up top on some models): check the frame area under the top

What the model number looks like

Kenmore model numbers are typically a long numeric string. For parts lookup, copy it exactly as shown on the label.

What to record	Example format	Why we need it
Model number	911.93311010 or 91193311010	Matches the correct parts list and diagrams
Serial number	Letters and numbers	Helps identify production variation

Tips to avoid ordering the wrong part

Use these quick checks before you shop for parts like a bake element, drip pan, or oven light bulb:

• Write the model number exactly; do not add spaces
• Take a clear photo of the label for reference
• Match the appliance type: 30-inch electric freestanding range
• If you are replacing a common item, confirm the part by description and ID (for example, range oven light bulb 40A15)

Why it matters

Kenmore ranges often share similar-looking parts across multiple model series. Using the exact model number ensures the correct fit for electrical items (surface element switches, terminal block) and oven parts (broil element, door gasket).

Last updated: February 2026

On a Kenmore electric range, an F11 code means the oven control detected a function error (the display flashes “F” plus a number and the range may beep). On model 91193311010, the first fix is to reset power, then retry the oven operation using the steps in the owner's manual.

What to do right away (safe reset)

• Turn the oven control knob to OFF.
• Disconnect power to the range for at least 30 seconds (unplug or switch the breaker off).
• Restore power.
• Try a simple oven function (for example, Bake) and watch the display.
• If the code returns, stop using the oven until the cause is corrected.

If F11 happens during self-clean

If F11 shows up during a self-clean cycle, we treat it as a function error during clean mode.

• Turn the oven control knob to OFF.
• Check the oven door latch: make sure it is moved to the right as far as it will go.
• Let the oven cool for 1 hour, then retry the operation.

Common causes (what F11 usually points to)

F-codes are triggered when the control senses something out of range. The most common culprits are:

• A problem with the oven control or its internal circuitry
• A stuck or shorted keypad/control input (if your model uses a touch panel)
• A door latch switch/latch alignment issue during self-clean
• Loose, damaged, or overheated wiring connections at the control

Quick decision guide

Situation	Best next step
F11 appears once, then clears after reset	Keep using, monitor for repeat codes
F11 repeats after the 30-second power reset	Schedule a diagnosis; check wiring and control inputs
F11 appears during self-clean	Verify latch position, cool 1 hour, retry

Why it matters

When the range beeps with an F-code, the control is telling you it cannot reliably manage oven temperature, timing, or door-latch safety logic. Resetting and checking the latch prevents repeated faults and helps protect the control and wiring.

Last updated: February 2026

The Kenmore 91193311010 is a 30-inch electric freestanding range; that “30-inch” describes the standard range width, not the oven’s internal capacity. For the exact oven cavity size and rack positions for your specific model, use the specifications section in the owner's manual.

What “size” can mean for this model

When people ask for oven size, they usually mean one of these:

• Range width (the appliance size that fits the cabinet opening): typically 30 inches for this model type
• Oven capacity (cubic feet): the usable space inside the oven cavity
• Interior dimensions (width, height, depth): helpful for fitting large pans
• Rack configuration (number of rack positions and usable rack area)

How to find the exact oven cavity size

We use the manual because it lists the model’s official specifications and features.

1. Open the owner's manual.
2. Look for sections labeled Specifications, Features, or Oven racks.
3. If you are measuring for a roasting pan, measure the usable flat rack area (not the full cavity walls).

Quick measuring tips (most accurate)

• Measure interior width at the rack level you actually use.
• Measure depth from the back wall to the inside of the closed door (not the door glass).
• Measure height from the rack to the top of the cavity if you are fitting tall cookware.

Typical sizing guide (helps when planning cookware)

These are common expectations for a 30-inch freestanding electric range; use the manual for exact numbers.

Measurement type	What it tells you	Typical for 30-inch ranges
Range width	Fit in cabinet cutout	30 inches
Oven capacity	Overall cooking volume	About 4.0 to 5.3 cu. ft.
Usable rack area	Pan fit and spacing	Varies by rack position

Why it matters

Using the correct oven cavity size prevents problems like blocked airflow, uneven baking, and cookware that hits the oven walls or door. It also helps you choose the right oven rack and accessories for how you cook.

Last updated: February 2026