Kenmore Elite 79573133411 bottom-mount refrigerator Parts

For Kenmore Elite refrigerator model 79573133411, we raise the cabinet by adjusting the two front leveling legs. Turn a leveling leg counterclockwise to raise that side, then adjust both legs evenly so the refrigerator sits level and the doors close properly (see the 79573133411 owner's manual).

Safest way to raise it (leveling legs)

Use the built-in leveling legs for small height changes and proper door closing.

• Pull the refrigerator forward enough to reach the front leveling legs
• Use the tool listed for this model in the manual (commonly a wrench or flat-blade screwdriver)
• Turn counterclockwise to raise that side; turn clockwise to lower
• Turn both legs the same amount to avoid twisting the cabinet
• Recheck door closing after each adjustment; a slight rear tilt helps doors close

Quick direction guide

Adjustment goal	What to turn	What happens
Raise left or right front	Leveling leg counterclockwise	That side goes up
Lower left or right front	Leveling leg clockwise	That side goes down
Improve door closing	Both legs counterclockwise (equal turns)	Slight rear tilt

If you need more height than the legs provide

If you need to lift the refrigerator more than the leveling legs allow, use a solid, fully supported platform under the entire footprint.

• Use a rigid base that supports the full bottom (not corner blocks)
• Keep the refrigerator level side-to-side to prevent door misalignment
• Maintain airflow clearance around the cabinet and grille area

Why it matters

Correct height and leveling protect door seals, reduce vibration, and help the doors self-close. On model 79573133411, the manual specifically calls out adjusting tilt and using equal turns on both leveling legs for best door operation.

Last updated: February 2026

For Kenmore Elite model 79573133411, the most accurate way to get cubic feet is to look up the capacity in the specifications section of the 79573133411 owner's manual. Model numbers can hint at a series, but they do not reliably encode the exact cubic-foot capacity.

Best ways to find cubic feet (capacity)

• Check the specs in the manual: Look for “Capacity” or “Total capacity” (refrigerator + freezer). Use the 79573133411 owner's manual.
• Read the rating label: Many refrigerators list capacity on the model and serial tag inside the fresh food compartment (often on a side wall) or near a crisper area.
• Measure and estimate (backup method): If the label is missing, you can estimate interior volume by measuring usable interior space, then converting cubic inches to cubic feet.

Quick estimate method (when you cannot find the spec)

1. Measure usable interior width, height, and depth (in inches) for:
   • Fresh food compartment
   • Freezer compartment
2. Multiply each section: W x H x D = cubic inches
3. Convert: cubic inches ÷ 1,728 = cubic feet

What you’re measuring	Include	Exclude
Fresh food section	main open cavity	door bins, thick insulation walls
Freezer section	drawer cavity space	ice bin volume, unusable corners

Why it matters

Cubic feet helps you compare refrigerators, choose replacement shelves and bins, and set realistic expectations for storage. For parts ordering on Kenmore Elite 79573133411, the model number is still the key identifier even when capacity is unknown.

Last updated: February 2026

Kenmore refrigerators like model 79573133411 typically do not have one single, dedicated “reset” button. For most control glitches, we reset the refrigerator by power-cycling it (unplugging briefly, then restoring power) and then re-setting the temperature controls as needed; see the 79573133411 owner's manual for model-specific control details.

Quick ways we reset a Kenmore refrigerator

• Hard reset (power-cycle): Unplug the refrigerator, wait about 5 minutes, then plug it back in.
• Breaker reset: If you cannot reach the plug, turn the circuit breaker OFF, wait about 5 minutes, then turn it ON.
• Control reset: After power is restored, reset the refrigerator and freezer controls to your preferred settings.
• Display lock check: If buttons do not respond, the display may be locked; some models use a button-hold to lock/unlock.

What to do after a reset

A reset clears minor electronic hiccups, but cooling and ice production still take time to stabilize.

What you’re checking	What’s normal after reset	What to do
Interior lights and display	Come back on quickly	Confirm controls are not set to OFF
Cooling	Temperatures drift, then recover	Allow 24 hours for temps to fully stabilize
Ice maker	May pause before cycling	Allow 24 to 48 hours for full ice production

If the display is unresponsive

On some Kenmore Elite models, the control panel can be locked. The manual for this series also describes locking the display by pressing and holding a button (commonly Door Alarm) for about 3 seconds as part of Kenmore Connect setup steps.

• Try holding Door Alarm for 3 seconds to toggle lock/unlock.
• If the refrigerator is in a “locked” state, unlock it before trying other buttons.
• If the unit will not power on at all, troubleshoot power first (outlet, breaker, cord).

Why it matters

A true “reset” is usually just restoring power and re-establishing correct control settings. That helps the control board recover from a power interruption and prevents issues like warm temperatures, no ice, or a dispenser that seems to stop responding.

Last updated: February 2026

Common problems on the Kenmore Elite 79573133411 bottom-mount refrigerator include warm temperatures from airflow restrictions (dirty coils, blocked vents), defrost-related frost buildup, water leaks from a clogged drain, and ice or water dispenser issues. We use the 79573133411 owner's manual troubleshooting guide to pinpoint the symptom and the most likely part.

Most common symptoms and what usually causes them

• Not cooling or weak cooling: dirty condenser coils, failed condenser/evaporator fan, or a sealed-system/compressor problem
• Frost buildup or warm fridge with cold freezer: defrost system issue (sensor/heater/control) or blocked air passages
• Water leaking inside or under the unit: clogged/iced drain system (often the drain tube)
• Ice maker not making ice: water supply issue, inlet valve problem, or ice maker failure
• Dispenser issues (ice door not opening/closing): chute door motor or ice door mechanism problem

Quick checks we recommend before replacing parts

1. Confirm temperature settings and give the unit 24 hours to stabilize after changes.
2. Make sure food packages are not blocking return vents and air towers.
3. Clean condenser coils and verify the condenser fan is running when the compressor runs.
4. Look for heavy frost on the freezer back panel (a strong clue of a defrost problem).
5. Check for slow drainage or ice at the bottom of the freezer (points to a drain restriction).

Parts that commonly solve these problems on model 79573133411

Symptom	Common fix	Example part for this model
Leaking water, ice buildup near drain	Clear/replace drain path	Refrigerator drain tube 5251JA3003D
No ice or slow ice production	Restore water flow to ice maker	Lg refrigerator water inlet valve AJU72992601
Ice dispenser door not operating right	Replace chute door motor	Refrigerator dispenser ice chute door motor EAU59551204
Bad taste/odor, slow water flow	Replace water filter	Genuine Kenmore refrigerator water filter 9690 AGF80300801

Why it matters

These issues often start small (restricted airflow, a partially clogged drain, a weakening valve) but can lead to food spoilage, recurring ice buildup, or dispenser failures. Catching the root cause early helps protect the compressor and keeps temperatures stable.

Last updated: February 2026

A Kenmore Elite refrigerator like model 79573133411 typically lasts 10 to 15 years under normal household use. Consistent maintenance (cleaning condenser coils, keeping door seals tight, and changing the water filter on schedule) helps you reach the high end of that range.

Typical lifespan and what affects it

Most refrigerators fall into a fairly predictable service-life window, but real-world lifespan depends on heat, airflow, and how hard the sealed system has to work.

• 10 to 15 years is the typical average for modern refrigerators
• Heavy use (large families, frequent door openings) can shorten lifespan
• Poor airflow (dusty coils, tight cabinet clearance) increases compressor run time
• Worn door gaskets cause warm air leaks and frost, raising energy use
• Water and ice system upkeep (filter changes, leak prevention) reduces secondary failures

Maintenance checklist that extends life

We recommend using the care and maintenance schedule in the 79573133411 owner's manual and sticking to these basics:

• Vacuum condenser area and remove dust buildup regularly
• Keep door gaskets clean; replace if torn, warped, or not sealing
• Maintain stable temperatures (avoid frequent warm-up from propped doors)
• Replace the water filter on schedule; a clogged filter can reduce flow and strain the water system
• Address unusual noises, warm temps, or repeated frost early to prevent bigger failures

Common “repair or replace” decision guide

Use age plus symptom severity to decide your next step.

Refrigerator age	Typical recommendation	Why
0 to 5 years	Repair is usually worth it	Parts are commonly available; lower wear overall
6 to 10 years	Compare repair cost vs. condition	Mid-life; multiple small issues can add up
11 to 15+ years	Replace if major sealed-system or compressor issue	High-cost repairs often exceed value

If you are maintaining the water system on this model, the genuine Kenmore refrigerator water filter 9690 AGF80300801 is the correct filter listing for this page.

Why it matters

Knowing the expected lifespan helps you plan for major components like the compressor, evaporator, and control board. Preventive maintenance reduces run time, improves cooling consistency, and helps avoid food spoilage and unexpected downtime.

Last updated: February 2026

Kenmore Elite model 79573133411 is a bottom-mount refrigerator in the 795.7313 series. For fit planning, use a width around 32 to 32 7/8 inches, height around 68 3/8 to 69 3/4 inches, and depth up to about 35 3/8 inches with handles; confirm your exact configuration in the 79573133411 use and care guide.

Dimensions to plan around

Use these planning numbers when checking a cabinet opening, doorway, or delivery path; then measure your unit to confirm.

• Width: about 32 to 32 7/8 in.
• Height: about 68 3/8 in. to top of case, up to about 69 3/4 in. to top hinge
• Depth: about 32 7/8 in. without handles, up to about 35 3/8 in. with handles
• Door swing clearance: allow at least 24 in. in front to open the doors (noted in the manual)

Quick measuring checklist (so you do not get surprised)

Measure at the widest and deepest points that matter for your space.

• Measure width at doors and hinges (often the widest point)
• Measure depth two ways: without handles and with handles
• Measure height to the hinge area, not just the cabinet top
• Confirm front clearance for door swing and drawer pull-out
• If moving through a tight opening, follow the manual steps for handle or door removal

Common “size” confusion points

What you are checking	Use this measurement	Why it matters
Cabinet opening width	Width at doors/hinges	Prevents rubbing and alignment issues
Counter depth fit	Depth without handles	Helps estimate how far the box will stick out
Overall projection	Depth with handles	Handles often add 2+ inches
Overhead cabinet clearance	Height to top hinge	Hinge cover can be the tallest point

Why it matters

Being off by even 1 inch can block door swing, prevent the freezer drawer from opening fully, or reduce airflow around the refrigerator.

Last updated: February 2026

On a Kenmore Elite refrigerator like model 79573133411, the model and serial tag is typically inside the fresh food (refrigerator) compartment on a side wall near the crisper drawers, or on the cabinet frame behind the lower kickplate (toe grille). Confirm the exact label location in the 79573133411 owner's manual.

Common places to check first

Look in these spots in order; they are the most common on bottom-mount refrigerators:

• Inside the refrigerator section on the left or right interior wall, near the crisper drawers
• On the ceiling of the fresh food compartment (near the light cover)
• On the cabinet frame behind the lower kickplate (toe grille) at the front
• Along the door jamb (the frame area the door seals against)
• On the back exterior panel (less common, but possible)

Quick steps to find it fast

1. Open the refrigerator door and pull out the crisper drawers.
2. Shine a flashlight along the side walls and the frame just above the crispers.
3. If you do not see it, remove the lower kickplate and check the cabinet frame area.

What the label looks like (so you do not miss it)

The tag is usually a white or silver sticker or plate that includes:

• Model number (example: 79573133411)
• Serial number
• Electrical rating information (volts/amps)

Why it matters

We use the full model number to match the correct Kenmore Elite parts and diagrams for your exact refrigerator version. That prevents ordering look-alike parts that do not fit, such as a door gasket or water filter.

Examples of parts that depend on the exact model

Part type	Example from this model	Why the model number matters
Water filter	Refrigerator water filter 9690 AGF80300801	Filter head and bypass style can vary
Door seal	Refrigerator door gasket, right (noble gray) ADX73350633	Door size and color must match
Water valve	Lg refrigerator water inlet valve AJU72992601	Line fittings and coil specs can differ

Last updated: February 2026