Installation guide
Owner’s manual
Error Codes
Can I look up Frigidaire parts by model number?
Yes. For your Frigidaire electric range model LFEF3054TFN, looking up parts by the full model number is the most reliable way to get compatible replacement parts because it ties the part list to your exact configuration and serial plate information.
How to find the correct model number on the range
Frigidaire notes the serial plate is commonly located by opening the lower oven drawer or storage drawer (depending on the model). Use the complete model number exactly as shown.
- Open the lower drawer and look for the serial plate label
- Write down the full model number and serial number
- Match every character (letters and numbers) before ordering
- Use the model number to narrow to the correct diagrams and part list
For model-specific location details and product record info, use the LFEF3054TFN owner’s manual.
Why model-number lookup matters (and what it prevents)
Many Frigidaire ranges share similar-looking parts, but wiring, burner sizes, and control styles can differ. Model-number lookup helps prevent ordering a part that fits physically but does not connect or operate correctly.
Common issues it helps avoid:
- Wrong surface element switch style (single vs. dual)
- Wrong oven sensor or control compatibility
- Mismatched bake or broil element terminals
- Incorrect door seal profile
Examples of parts you can match to LFEF3054TFN
Once you search by model number, you can select the exact part by name and ID.
| What you’re fixing | Example matched part (name and ID) | Typical symptom |
|---|---|---|
| Surface burner won’t heat or won’t regulate | Range surface element control switch 316436001 | Burner stuck on high, won’t turn on, cycles incorrectly |
| Oven temperature seems inaccurate | Range oven temperature sensor 316490000 | Overbakes, underbakes, long preheat |
| Oven won’t bake | Range bake element 316413800 | No heat in bake, uneven baking |
Quick ordering checklist
- Confirm the model number is LFEF3054TFN (not a similar variant)
- Compare the part name and part ID to your symptom and location
- If you’re unsure, cross-check the diagrams and notes in the LFEF3054TFN installation guide
Why it matters: Using the exact model number reduces returns and gets your range back to safe, normal heating faster.
Last updated: February 2026
How do I tell what model my Frigidaire stove is?
Your Frigidaire electric range model number is printed on the serial plate; on model LFEF3054TFN, you’ll typically find it by opening the lower oven drawer or storage drawer and looking for the rating plate. Record both the model and serial number for parts and service.
Where to look on LFEF3054TFN
Check these common serial plate locations:
- Open the lower oven drawer (some models) and look along the frame area
- Open the storage drawer (some models) and look on the frame or side wall
- Look for a label that lists model and serial (letters and numbers)
- Use a flashlight; the plate is often low and partially shadowed
- Write the model number exactly as shown (including any suffix letters)
For a visual reference and model-specific documentation, use the LFEF3054TFN owner’s manual.
What to write down (and why)
When you find the plate, capture these details:
- Model number (example: LFEF3054TFN)
- Serial number
- Purchase date (helpful for service history)
| Item | What it’s used for | Tip |
|---|---|---|
| Model number | Matching parts diagrams and compatible parts | Copy it character-for-character |
| Serial number | Identifying production series and service info | Take a clear photo for backup |
| Purchase date | Warranty and maintenance records | Check receipt or delivery paperwork |
Why it matters
We use the model number to match the correct Frigidaire range parts (like a bake element, oven temperature sensor, or control board) because similar-looking ranges can use different wiring, controls, and surface elements.
Last updated: February 2026
What are the most common stove parts to replace?
On the Frigidaire LFEF3054TFN electric range, the most commonly replaced parts are the ones that take the most heat and daily wear: surface element switches and elements, oven heating parts (bake/broil), the oven temperature sensor, and small service items like the oven light bulb and door seal. See the LFEF3054TFN owner's manual for model-specific care and access steps.
Most common replacements for this model
- Surface element control switches (burner controls), especially if a burner will not regulate heat or stays on
- Radiant surface elements, if a burner will not heat or heats unevenly
- Oven temperature sensor, if baking temperatures are consistently off
- Bake element and broil element, if the oven will not heat in Bake or Broil
- Oven light bulb and light socket, if the interior light fails
- Oven door seal, if you notice heat loss, longer preheat, or poor baking results
Parts on this page that match those common failures
| Symptom | Likely part to check | Example part for LFEF3054TFN |
|---|---|---|
| Burner will not cycle or control is erratic | Surface element control switch | Range surface element control switch 316436001 |
| Oven temperature is inaccurate | Oven temperature sensor | Frigidaire range oven temperature sensor 316490000 |
| Oven light is out | Oven light bulb | Frigidaire range oven light bulb 316538904 |
| No heat in Bake | Bake element | Frigidaire range bake element 316413800 |
| No heat in Broil | Broil element | Frigidaire range broil element 316203301 |
| Heat leaking around door | Oven door seal | Range oven door seal 5304498835 |
Quick checks before you buy a part
- Confirm the problem is isolated (one burner vs. all burners; Bake vs. Broil).
- Inspect for visible damage: blisters, cracks, burn marks, or loose terminals.
- For oven issues, compare actual temperature to the set temperature after preheat (a consistent offset often points to the sensor).
- If the oven light is out, replace the bulb first; if it still will not work, check the socket.
- If controls are sticky or hard to turn, remove and clean knobs using mild detergent or a 50/50 vinegar and water mix (avoid excess water on the control area).
Why it matters
Replacing the right wear part restores safe, predictable heating and helps prevent secondary damage (for example, a failing switch that overheats a radiant element, or a leaking door seal that causes long preheat and uneven baking).
Last updated: February 2026
Where can I find my Frigidaire oven part number?
On your Frigidaire LFEF3054TFN electric range, the part you need is identified by the model and serial number on the appliance’s serial plate. For this model, the serial plate is typically found by opening the lower oven drawer or storage drawer.
Where to look on the range
Check these common serial plate locations first:
- Open the lower oven drawer (or storage drawer) and look along the frame area
- Look on the interior-side trim that’s visible when you open the oven door
- Check the left-side panel area that’s visible when the oven door is open
- If your range has a storage drawer, look on the frame just inside the drawer opening
For diagrams and model-specific location notes, use the LFEF3054TFN owner’s manual.
How to use the number to get the right part
Once you find the serial plate, record the information exactly as shown. We use it to match the correct Frigidaire parts list and ensure compatibility.
| What you’ll see | What it’s used for | Why it helps |
|---|---|---|
| Model number (LFEF3054TFN) | Finds the correct parts breakdown | Prevents ordering a similar-looking but different part |
| Serial number | Confirms production details | Helps narrow down version changes |
| Part ID / part number (from the parts list) | Orders the exact replacement | Ensures fit and electrical rating match |
Why it matters
Many range parts look alike but differ by wiring, mounting, or heat rating. Using the serial plate information helps us match the correct items, such as a surface element control switch, bake element, or oven temperature sensor.
Last updated: February 2026
Who makes Frigidaire electric ranges?
Frigidaire electric ranges (including model LFEF3054TFN) are made under the Frigidaire brand, which is part of Electrolux. In other words, Electrolux is the parent company behind Frigidaire-branded ranges sold in the U.S.
How to confirm the exact brand and model on your range
Your range’s identification label is the fastest way to confirm what you own and match parts correctly.
- Open the lower oven drawer or storage drawer and look for the serial plate
- Write down the full model number and serial number
- Match the model number exactly when ordering parts (letters and numbers matter)
- Keep the information with your paperwork for future service
For the official locations and recording fields, use the LFEF3054TFN owner's manual.
Why the manufacturer matters for parts and troubleshooting
Knowing the manufacturer helps us match the correct wiring, controls, and heating components for your Frigidaire electric range.
Common examples where it matters:
- Surface element control switch compatibility (infinite switch style)
- Oven temperature sensing and calibration
- Control board and error code interpretation
- Bake and broil element mounting and wattage class
Examples of model-matched parts you might see on LFEF3054TFN
| Part type | Example part name | Example part ID |
|---|---|---|
| Surface burner control | Range surface element control switch | 316436001 |
| Oven sensing | Range oven temperature sensor | 316490000 |
| Oven heating | Range bake element | 316413800 |
If you’re diagnosing a heating or control problem, we also recommend using the Frigidaire self-cleaning range error codes reference when an error code is displayed.
Why it matters
Frigidaire is the brand on the appliance, but the parent manufacturer (Electrolux) influences design families, service procedures, and which replacement parts fit safely and correctly.
Last updated: February 2026
