Kenmore
Mechanical Sewing Machine

Model #6221 Kenmore sewing machine

Here are the diagrams and repair parts for Kenmore 6221 sewing machine, as well as links to manuals and error code tables, if available.


There are a couple of ways to find the part or diagram you need:

  • Click a diagram to see the parts shown on that diagram.
  • In the search box below, enter all or part of the part number or the part’s name.

Not all parts are shown on the diagrams—those parts are labeled NI, for “not illustrated”.

We encourage you to save the model to your profile, so it’s easy to access parts and manuals for your appliance whenever you log in.

For DIY troubleshooting advice and repair guides, visit our repair help section.

Save to my profileError Codes

    Showing 10 of 356 parts

    Spacer Spring

    #29

    Feed system Diagram

    Spacer spring

    Part #445768

    The manufacturer no longer makes this part, and there's no substitute part

    Clamp

    #1

    Feed system Diagram

    Clamp

    Part #446485

    The manufacturer no longer makes this part, and there's no substitute part

    Screw

    #25

    Disc selection assembly Diagram

    Screw

    Part #531703-451

    The manufacturer no longer makes this part, and there's no substitute part

    Lvr Brkt Cpl

    #11

    Needle position Diagram

    Lvr brkt cpl

    Part #531707

    The manufacturer no longer makes this part, and there's no substitute part

    Followr Stud

    #15

    Needle position Diagram

    Followr stud

    Part #531708

    The manufacturer no longer makes this part, and there's no substitute part

    Slide Arm

    #2

    Needle position Diagram

    Slide arm

    Part #531740

    The manufacturer no longer makes this part, and there's no substitute part

    Mounting Plate

    #6

    Cam stack Diagram

    Mounting plate

    Part #531742

    The manufacturer no longer makes this part, and there's no substitute part

    Washer

    #10

    Covers & add-ons Diagram

    Washer

    Part #408098

    The manufacturer no longer makes this part, and there's no substitute part

    Release Lever

    #58

    Needle bar, presser bar & take-up Diagram

    Release lever

    Part #445925

    The manufacturer no longer makes this part, and there's no substitute part

    Take-up Stud

    #2

    Needle bar, presser bar & take-up Diagram

    Take-up stud

    Part #446260

    The manufacturer no longer makes this part, and there's no substitute part

    Symptoms common to all sewing machines

    Choose a symptom to see related sewing machine repairs.

    Main causes: power supply failure, bad power cord, faulty On/Off switch
    Main causes: faulty foot pedal, locked drive gears, wiring failure, bad drive motor
    Main causes: dirty shuttle race, improper thread routing, incorrect thread tension
    Main causes: lack of lubrication, lint buildup, worn drive belt, faulty drive motor
    Main causes: dirty shuttle race, wrong thread tension, bad needle timing, damaged needle, using the wrong type of needle
    Main causes: machine needs lubrication, internal gear failure
    Main causes: problems with the feed dogs, setting stitch length to 0
    Main causes: disengaged clutch, broken drive belt, internal drive gear failure
    Main causes: thread bunched up in the shuttle race, bad needle timing, internal drive gear failures

    Repair guides common to all sewing machines

    These step-by-step repair guides will help you safely fix what’s broken on your sewing machine.

    April 1, 2015
    By Lyle Weischwill
    How to replace a sewing machine on/off switch

    If the sewing machine is completely dead, replace the On/Off switch using these 6 steps.

    Repair difficulty
    Time required
     30 minutes or less
    April 1, 2015
    By Lyle Weischwill
    How to replace a sewing machine drive belt

    You can replace a broken sewing machine drive belt in about 15 minutes.

    Repair difficulty
    Time required
     15 minutes or less
    April 1, 2015
    By Lyle Weischwill
    How to replace a sewing machine drive motor

    If the drive motor on your sewing machine runs roughly or doesn't run at all, you can replace it in about 30 minutes using these simple steps.

    Repair difficulty
    Time required
     15 minutes or less

    Articles and videos common to all sewing machines

    Use the advice and tips in these articles and videos to get the most out of your sewing machine.

    January 18, 2016

    How to use a multimeter to test electrical parts video

    By Sears PartsDirect staff

    Learn how to use a multimeter to check for wiring problems in an appliance that's not working

    April 1, 2015

    Sewing machine common questions

    By Sears PartsDirect staff

    These answers to common questions can help you make the most of your sewing machine.