Kenmore 25370342210 refrigerator Parts

For Kenmore model 25370342210, the most accurate way to get cubic feet (capacity) is to look up the listed “capacity” specification in the 25370342210 owner's manual or on the serial/rating plate inside the fresh food compartment; that plate is the model-specific source.

Fast ways to find your capacity

Use these methods in this order for the best accuracy:

• Check the serial/rating plate inside the refrigerator compartment; it is where the model and serial number are recorded.
• Look in the specifications section of the 25370342210 owner's manual for “capacity” or “total capacity.”
• Use the Use and Care Guide index to jump to “Features at a glance” or “Specifications” (wording varies by revision).
• Do not rely on “model number math.” Some model families hint at size, but it is not consistent enough to be dependable.

Where to look inside the refrigerator

On this Kenmore bottom-mount style, the manual indicates the serial plate is located inside the refrigerator compartment. Typical locations include:

• Side wall near the crisper drawers
• Upper side wall near the top shelf
• Ceiling area near the light cover

What “cubic feet” means (and why it matters)

Cubic feet is the refrigerator’s interior storage volume. Knowing it helps you:

• Compare replacement units and storage needs
• Choose correctly sized organization parts (bins, baskets, shelves)
• Set realistic expectations for airflow and loading (overpacking reduces cooling performance)

Quick reference: common capacity ranges (for context)

These ranges help you sanity-check what you find on the plate or in the manual.

Refrigerator type	Typical capacity range
Bottom-mount (freezer drawer)	18 to 26 cu. ft.
Top-freezer	14 to 22 cu. ft.
Side-by-side	20 to 29 cu. ft.

Last updated: February 2026

Your Kenmore refrigerator’s model number is printed on the appliance ID label; on model 25370342210 it’s typically inside the fresh food compartment (often on a side wall or near the ceiling/crisper area), or on the door frame. Use that exact model number to match the correct parts and instructions in the owner's manual.

Where to look for the model number label

Check these common locations first (use a flashlight and look for a white or silver sticker):

• Inside the fresh food compartment on a side wall (often upper right)
• Inside the fresh food compartment near the crisper drawers
• On the door frame (open the fresh food door and look along the inner frame)
• Behind the toe grille or near the lower front area (less common, but worth checking)
• On the back of the cabinet near the power cord (if accessible)

What you should write down

The label usually includes more than one identifier. Record these exactly as shown:

• Model number (this is the key for parts lookup)
• Serial number (helps identify production run details)
• Electrical ratings (voltage/amps), if you are troubleshooting power issues

Model number vs. serial number (quick guide)

Item	What it’s used for	Example format
Model number	Finding the correct parts diagrams and replacement parts	25370342210
Serial number	Identifying the unit’s build information	Letters and numbers

Why it matters

Kenmore refrigerators can look similar across multiple model families, but parts like a water filter, door gasket, ice maker, or control board can vary by model. Using the exact model number prevents ordering the wrong component and helps you follow the right service steps.

Related parts you may match by model

If you are identifying the model to replace common maintenance items, these are frequently model-specific:

• Kenmore refrigerator water filter 9999
• Refrigerator door air filter EAFCBF
• Refrigerator ice maker 243297613

Last updated: February 2026

Most Kenmore refrigerators, including model 25370342210, last 10 to 15 years with normal use. Keeping airflow and seals in good shape, and staying on top of routine items like the water filter, helps your refrigerator cool consistently and avoid premature compressor or fan wear.

Typical lifespan and what affects it

A refrigerator’s life is mostly determined by heat management, door sealing, and how hard the sealed system has to work.

• Condenser cleanliness: dusty coils make the compressor run hotter and longer
• Door gasket condition: air leaks cause longer run times and frost issues
• Fan performance: weak evaporator or condenser airflow reduces cooling efficiency
• Water system maintenance: clogged filters can reduce water flow and strain the inlet valve
• Temperature settings and loading: overpacking blocks vents and creates warm spots

Maintenance schedule we recommend

Use this as a practical baseline for a Kenmore bottom-mount refrigerator.

Task	How often	Why it matters
Replace water filter	Every 6 months	Maintains water quality and normal flow
Check/clean door gaskets	Every 3 to 6 months	Prevents warm air leaks and frost
Clean condenser area	Every 6 to 12 months	Reduces compressor heat and run time
Verify temps (fresh food/freezer)	Monthly	Catches cooling drift early

For this model, the Use and Care Guide calls out changing the water filter about every six months; see the owner's manual.

Parts that commonly extend service life

If performance issues show up, these are common wear items we see on bottom-mount refrigerators.

• Kenmore refrigerator water filter 9999 for routine replacement
• Refrigerator door gasket 5304537408 if the door is not sealing tightly
• Refrigerator evaporator fan blade 5308000010 if airflow is weak or noisy
• Refrigerator water inlet valve assembly 242253002 if the ice maker or dispenser has low flow

Why it matters

A refrigerator that runs longer to hold temperature uses more energy and puts extra load on the compressor, fans, and defrost system. Simple upkeep (especially seals, airflow, and filter changes) is the most reliable way to reach the full 10 to 15 year lifespan.

Last updated: February 2026

A bad compressor on your Kenmore 25370342210 refrigerator usually shows up as poor cooling even though the unit is running, repeated clicking as it tries to start, or a compressor that runs hot and never stabilizes temperatures. Confirming the compressor itself requires electrical checks and sealed-system diagnosis.

Quick symptoms that point to a compressor problem

Look for a pattern of these issues (one symptom alone is not enough):

• Refrigerator and freezer both warm, even with controls set correctly
• Compressor clicks on and off every few minutes (start attempt, then shutdown)
• Compressor runs almost constantly but temperatures do not improve
• Little to no airflow inside the fresh food section (can also be an evaporator fan issue)
• Unusual heat at the compressor area after it has been trying to run

Rule out common look-alikes first

Many “no-cool” complaints are caused by airflow, defrost, or installation conditions, not the compressor.

• Air circulation: Do not block the toe grille; proper airflow is required for normal operation.
• Clearances: Typical guidance for this style is about 3/8 inch at the sides/top and 1 inch at the back.
• Room temperature: If the space is below 55°F or above 110°F, the compressor may not maintain proper internal temps.
• Fans and defrost: A failed evaporator fan, condenser fan, or defrost heater can mimic a bad compressor.

What a technician tests (and why)

These checks separate a failed compressor from a start-device, control, or airflow problem:

Test/check	What it helps confirm	Typical outcome if compressor is bad
Start attempt behavior	Hard-start vs. normal start	Repeated click, no sustained run
Amp draw while starting/running	Locked rotor or overload trip	High spike then trip, or abnormal draw
Winding continuity/short to ground	Internal electrical failure	Open winding or short to ground
Sealed-system performance	Refrigerant flow/compression	Poor pumping, no cooling despite run

Parts that are commonly involved

If diagnosis confirms a compressor failure, replacement is a sealed-system repair. For this model, the compressor is listed as refrigerator compressor 5304475104. If cooling issues are caused by airflow instead, common suspects include the evaporator fan blade or condenser fan blade.

Why it matters

Replacing a compressor is one of the most complex refrigerator repairs; accurate diagnosis prevents replacing an expensive sealed-system part when the real issue is a fan, defrost heater, control board, or installation airflow problem. For operating and installation basics, use the installation guide and owner's manual.

Last updated: February 2026

Kenmore model numbers tell us the appliance type and the manufacturing source, which helps us match the correct parts and documentation. For Kenmore refrigerator model 25370342210, the 253 prefix identifies the manufacturing source used for many Kenmore refrigerators; the remaining digits narrow down the exact design and feature set.

Where to find the model number on this refrigerator

For Kenmore 25370342210, we use the model and serial information from the serial plate inside the refrigerator compartment. The 25370342210 owner's manual explains where this information is recorded and why it matters for service and parts matching.

• Look inside the fresh food (refrigerator) compartment for the serial plate
• Write down the full model number and serial number exactly as shown
• Use only soap and water to clean the serial plate so the printing stays readable
• Keep the purchase date with your records for future reference

How to interpret a Kenmore model number (practical breakdown)

Kenmore model numbers are most useful when you read them in sections.

Section	Example (25370342210)	What it tells us	Why you care
Prefix	253	Manufacturing source code	Helps ensure parts diagrams and components match your build
Core digits	703422	Base platform and configuration	Points to the correct series and major design
Suffix digits	10	Revision/variation	Helps avoid ordering a similar looking but incompatible part

Why it matters when ordering parts

Even small model number differences can change fit, wiring, or water system connections. When you use the full model number, we can match parts like a water filter, ice maker, or door gasket correctly.

Common examples for this model include:

• Kenmore refrigerator water filter 9999 for the ice and water system
• Refrigerator ice maker 243297613 if the ice maker stops producing ice
• Refrigerator door gasket 5304537408 if warm air leaks cause frost or sweating

Quick tips to avoid mix-ups

• Use the full model number, not just the first three digits
• Match letters and numbers exactly (no spaces added or removed)
• If you are comparing parts, confirm the part ID and description match your model’s parts list

Last updated: February 2026