Jenn-Air D120 electric freestanding range Parts

Most electric ranges, including the Jenn-Air D120 electric freestanding range, do not run on 120 volts alone. They typically use a 120/240-volt (or 120/208-volt) supply so the oven and surface elements can heat on 240 volts while lights, clock, and controls use 120 volts.

What voltage should you expect for an electric range?

In most homes, an electric range is supplied by a dedicated circuit that provides two “hot” legs plus neutral and ground.

• 240 volts powers high-heat loads (bake element, broil, many surface elements)
• 120 volts powers lower-heat loads (oven light, clock/timer, some electronics)
• The range usually plugs into a 3-prong or 4-prong range receptacle (depending on your home wiring)
• The breaker is commonly 40 to 50 amps for full-size ranges

Quick check: what you will see at the outlet

If you are comfortable using a meter, you can confirm what is present at the receptacle.

What you measure	Typical reading	What it means
Hot to hot	~240V (or ~208V)	Heating power available
Hot to neutral	~120V	Control and accessory power
Neutral to ground	~0V	Grounding reference (should be near zero)

For safe testing technique, use our how to use a multimeter to test electrical parts video.

Why it matters

If the range only has 120V available (or one hot leg is missing), you can see symptoms like weak heating, an oven that will not heat, or surface elements that do not get hot. In those cases, the issue is often the supply circuit, receptacle, cord, or a failed heating component.

Parts that commonly relate to heating or control issues

If power is correct and a burner or the oven still will not heat, these model-related parts are often involved:

• Oven bake element WP715269 (no bake heat)
• Infinite switch 700855K (surface element not regulating)
• Receptacle 715120 (burner connection problems)
• Switch knob WPY700854 (knob cracked or slipping)

You can order replacement parts for your Jenn-Air D120 from the parts list for this model, or search by model number on Sears PartsDirect.

Last updated: February 2026

To reset your Jenn-Air D120 electric freestanding range, we recommend doing a full power reset at the breaker for 1 to 5 minutes, then restoring power and resetting the clock. This clears many control glitches after a power surge or error.

Quick reset steps (most common)

• Turn the oven controls to OFF.
• Switch OFF the range circuit breaker (or unplug the range if it uses a cord).
• Wait 1 to 5 minutes.
• Restore power.
• Set the clock, then test Bake at 350°F.

If the oven still will not heat after a reset

A reset fixes software or control lockups; it does not fix a failed heating circuit. On the Jenn-Air D120, these checks narrow it down fast:

• Bake does not heat but broil works: the bake heater is often the issue; see oven bake element WP715269.
• Neither bake nor broil heats: check house power (a range can light up on 120V but not heat without full 240V).
• One surface burner will not regulate heat: the control may be failing; see infinite switch 700855K.
• Knob is cracked or slipping: replace the knob so the switch shaft turns correctly; see switch knob WPY700854.

What “reset” actually does (and does not do)

Reset method	What it fixes	What it will not fix
Breaker power reset	Frozen control, minor error state, clock issues	Burned-out element, broken wire, failed switch
Turning knobs to OFF	Cancels a cooking cycle	Electrical faults

Why it matters

A proper power reset is the safest first step because it restores the control to a known state. If heat still fails afterward, focusing on the bake element, infinite switch, or wiring prevents guesswork and repeat shutdowns.

Ordering the right parts

We list model-matched replacement parts for the Jenn-Air D120 on this page. For additional part searches by model number, use Sears PartsDirect.

Last updated: February 2026

An electric stove (range) like the Jenn-Air D120 is made up of the cooktop heating elements and controls on top, plus the oven and its heating system below; all of these parts work together to heat, bake, and broil safely and consistently.

Main parts you will typically find on an electric range

• Cooktop surface elements (burners): provide heat for pots and pans
• Surface element controls: knobs and switches that regulate heat level
• Oven cavity and racks: where baking and roasting happen
• Bake system: the lower oven heating element used for most baking
• Broil system: the upper heating element used for broiling and browning
• Vent and grease management (on some models): helps manage cooking vapors

Common D120 replacement parts we see customers need

These are examples of parts available for the Jenn-Air D120 that match common “what’s on my stove?” questions:

Stove area	What it does	Example part on this model
Cooktop controls	Lets you set burner heat	Switch knob WPY700854
Cooktop heating control	Cycles power to a surface element	Infinite switch 700855K
Oven heating	Provides bake heat in the oven	Oven bake element WP715269
Venting/filtration (if equipped)	Captures grease from cooking vapors	Grease filter WP71002111

Why it matters

Knowing the correct part name helps you match symptoms to the right repair. For example, a burner that will not regulate heat usually points to a knob or infinite switch, while an oven that will not bake often points to the bake element.

Ordering the right part

• Match the model number D120 on your range to the parts list for this model
• Compare the part ID (for example, WP715269) to your old part when possible
• Replace damaged wiring or terminals at the same time if they are overheated
• Use a multimeter test when diagnosing heating and electrical parts

For additional parts searches by model number, we also offer model lookup and ordering through Sears PartsDirect.

Last updated: February 2026