Kenmore 58765630 600 dishwasher Parts

Yes. We still carry replacement parts for many Kenmore dishwashers, including model 58765630. The key is matching parts by the full model number so you get the correct fit for your dishwasher’s pump, heating, and rack hardware.

How to make sure you order the right part

Use your dishwasher’s model number (58765630) and then match the part by name and ID.

• Confirm the model number from the rating label (usually on the tub frame near the door).
• Compare the part name and part ID, not just a generic description.
• Replace seals and fasteners when you open a water path to prevent leaks.
• If you are troubleshooting heat or drying issues, check the heating circuit components.
• If you are unsure which assembly you need, start with the symptom (leak, no heat, poor wash).

Common Kenmore dishwasher parts we stock for model 58765630

Here are examples of parts available for this model that customers commonly replace:

Symptom or job	Example part for this model	What it does
Water leak at heater area	Heater gasket 5300806109	Seals the heater connection to help prevent leaks
Poor temperature control	Thermostat 5300807464	Helps regulate water temperature for washing and drying
Rack rolling issues	Caster 5300808972	Helps the rack roll smoothly on the rails
Pump or wash circulation service	Upper ump 5300809005	Part of the upper pump/wash water path assembly

Why it matters

Kenmore dishwashers are built with model-specific variations (mounting points, seals, electrical connectors). Ordering by model 58765630 reduces returns and helps ensure the replacement part restores proper washing, heating, and leak protection.

Last updated: February 2026

For a Kenmore dishwasher, we find the model number on the identification label inside the door area. Open the door and look around the inner door frame, the top edge of the door, or the tub rim; match what you see to your parts listing (for example, model 58765630).

Where to look on the dishwasher

Check these common label locations first:

• Left or right inner door frame (around the opening)
• Top edge of the door (visible when the door is open)
• Tub rim or tub wall near the door opening
• Along the side of the inner door panel
• Lower kickplate area (sometimes the tag is tucked behind it)

What the model number looks like (and what to write down)

Kenmore dishwasher model numbers are typically a long number string, sometimes with dots or prefixes on other Kenmore models. For 58765630, record:

• Model number (example: 58765630)
• Serial number (helps confirm production run and correct fit)
• Any revision or suffix characters if shown

Quick check table

What you see on the tag	What it means	Why we need it
Model number	Identifies the exact dishwasher design	Ensures diagrams and parts match
Serial number	Identifies the unit’s build sequence	Helps avoid wrong-version parts
Brand (Kenmore)	Confirms manufacturer family	Helps narrow compatible parts

Why it matters for parts and troubleshooting

Even small model differences can change the pump, heater circuit, racks, or door latch style. Using the exact model number helps us match the correct dishwasher parts and avoid returns.

If the label is hard to read

Use these practical steps:

• Wipe the tag gently with a damp cloth to remove film
• Use your phone camera and zoom in for clearer text
• Look for a second tag near the kickplate if the door tag is damaged
• Compare the number you find to your parts list for model 58765630

If you are ordering a small hardware item and want to confirm fit, match the model first, then verify the part ID on the listing (for example, lock washer 5300804526).

Last updated: February 2026

Yes, repairing a Kenmore dishwasher model 58765630 is usually worth it when the problem is a leak, loose hardware, or a single failed component and the total repair cost stays well below the price of a comparable new dishwasher. Replacement makes more sense when multiple major systems are failing (wash, heat, and drain) or when repairs stack up.

Quick decision checklist

• If the dishwasher is under ~10 years old, repairs are typically the better value.
• If the repair is simple and localized (seal, gasket, fastener, thermostat), repair it.
• If you have standing water, no wash action, and no heat together, expect a larger repair.
• If the tub is rusted, cracked, or badly leaking from the body, replacement is the practical choice.
• If the estimate is over ~50% of a new unit’s cost, replacement is usually the smarter spend.

Common “worth it” repairs on this model

These are the types of fixes that often restore normal operation without a major teardown:

• Fixing seepage at the heater area with a new heater gasket 5300806109
• Addressing heating issues by testing and replacing the thermostat 5300807464
• Correcting rack or alignment problems by replacing a worn caster 5300808972
• Re-securing components using the correct lock washer 5300804526

Cost and complexity guide

Repair type	Typical effort	Typical value outcome
Gasket/seal leak (heater area)	Low	Usually worth repairing
Thermostat or basic electrical part	Medium	Often worth repairing
Multiple symptoms across wash, drain, and heat	High	Often leans toward replacement

Why it matters

A targeted repair can stop leaks, restore proper water temperature, and improve cleaning performance, which also helps prevent repeat issues like poor drying or detergent residue. Replacing only the failed part keeps your Kenmore 58765630 running reliably without paying for a full new installation.

Last updated: February 2026

The Kenmore dishwasher model 58765630 is a standard built-in size; most installations fit a 24-inch-wide opening with an overall height around 35 inches and depth around 24 to 26 inches (depending on door and handle). Verify your cabinet cutout before ordering parts.

Typical dimensions you should plan around

Because cabinetry and leveling legs affect fit, we recommend measuring your actual opening and the dishwasher frame.

• Width (opening): 24 inches (most common built-in)
• Height (adjustable): typically about 33 1/2 to 35 7/8 inches
• Depth: typically about 24 to 26 inches (door closed)
• Toe-kick clearance: varies by cabinet and leveling
• Side clearance: allow a little room for insulation and routing hoses

How to measure your dishwasher space

Measure in three spots (front, middle, back) to catch out-of-square cabinets.

1. Width: inside-to-inside of the cabinet opening.
2. Height: floor to underside of countertop at left and right.
3. Depth: from back wall to front of cabinet face (then confirm door clearance).

Quick fit checklist (what to confirm)

What you’re checking	What “good” looks like	Why it matters
Cabinet opening width	About 24 inches	Prevents binding during install/removal
Countertop height	Within the dishwasher’s adjustable range	Ensures the unit can level and seal
Depth to cabinet face	Enough for door to close flush	Avoids protruding door and leaks
Hose and cord routing	No kinks, no pinches	Prevents drain and fill problems

Why it matters

Correct sizing helps you avoid installation headaches and prevents issues like door interference, poor leveling (which can affect washing and draining), and pinched water or drain lines.

If you’re replacing a mounting or leveling-related fastener during a reinstall, match the original hardware style and location; a common example is a securing fastener like the screw 5300807501.

Last updated: February 2026