Owner’s manual
Error Codes
How many cubic feet is my Kenmore Coldspot refrigerator model 10663982301?
The exact cubic-foot capacity for Kenmore model 10663982301 is listed on the model’s rating information in the owner's manual. If you are comparing sizes for replacement or kitchen fit, most Kenmore 106 top-mount refrigerators commonly fall in the 18 to 22 cu. ft. range.
We recommend checking these places first because they tie directly to your specific model configuration.
- Look in the specifications section of the owner's manual
- Check the model and serial label inside the fresh food compartment (often on an interior side wall)
- If your manual lists total volume and freezer volume separately, add them for total cubic feet
- Use the capacity when ordering shelves, bins, or door parts so you match the correct interior layout
Capacity affects how the refrigerator is set up inside (shelf spacing, crisper size, door bin layout) and can also help you compare cooling performance expectations for a top-mount design.
| What the spec may be called | What it means | How to use it |
|---|---|---|
| Total capacity | Combined refrigerator + freezer volume | Best number for “how many cubic feet” |
| Refrigerator capacity | Fresh food section only | Helps compare usable fridge space |
| Freezer capacity | Freezer section only | Helps compare frozen storage |
If you are troubleshooting cooling or airflow issues while evaluating whether the unit is “the right size,” the evaporator fan is a common airflow component in Kenmore 106 designs. If you hear squealing, rattling, or the fridge warms while the freezer stays cold, the evaporator motor WP2315539 is one of the parts we commonly see involved.
Last updated: February 2026
What causes a Coldspot 10663982301 to stop cooling?
A Kenmore 10663982301 (Coldspot) typically stops cooling because cold air is not circulating correctly, the temperature control is set to OFF, or a key cooling component (fan, defrost system, or compressor) is failing. Start with airflow and control settings, then move to fans and frost buildup using the owner's manual.
- Confirm the refrigerator control is not set to OFF; set both controls back to the factory mid-setting and wait for temperatures to stabilize.
- Wait a full 24 hours after any major adjustment or after plugging in before judging cooling performance.
- Make sure freezer and fresh food air vents are not blocked by packages (blocked vents stop cold air movement).
- Limit door openings and avoid loading large amounts of warm food all at once.
- Listen for normal operation sounds: evaporator fan circulating air and condenser fan moving air over the condenser.
| Likely cause | What you’ll see/hear | What to do next |
|---|---|---|
| Controls set wrong or set to OFF | Unit runs little or not at all | Reset to mid-settings; allow 24 hours |
| Blocked vents or poor airflow | Freezer cold but fridge warm | Clear vents; reorganize food |
| Evaporator fan problem | Weak airflow from vents; warmer temps | Check fan operation; consider evaporator motor WP2315539 |
| Defrost system issue (frosted evaporator) | Frost/ice buildup; airflow drops | Defrost and diagnose; consider defrost bi-metal WP4387503 |
| Condenser fan or sealed system/compressor issue | Warm cabinet, poor cooling, unusual cycling | Inspect condenser area; sealed system service may be needed |
On the 10663982301, cold air enters through the bottom of the freezer section and moves upward; most recirculates in the freezer and the rest feeds the refrigerator through the top vent. When vents are blocked, temperatures rise and moisture problems follow.
If basic settings and vent checks do not restore cooling, these model-matched parts are common next steps:
- Evaporator motor WP2315539 (moves cold air through both compartments)
- Defrost bi-metal WP4387503 (helps control defrost heating and prevents heavy frost)
- Refrigerator compressor W10309988 (core cooling component; replacement is an advanced repair)
Last updated: February 2026
How to read Kenmore model numbers?
Kenmore model numbers are read left to right: the first 3 digits identify the original manufacturer, and the remaining digits identify the specific product design and feature set. For your Kenmore top-mount refrigerator model 10663982301, the 106 prefix points to a Whirlpool-built design; the rest narrows down the exact configuration for parts matching.
We recommend using the full model number exactly as shown on the rating label, because a single digit can change which shelves, valves, or ice maker fit.
- Look inside the fresh food compartment on the side wall
- Check the ceiling area near the light housing
- Look behind the crisper drawers near the bottom
- Check the back exterior panel if you do not see it inside
- Write down the full number, including any suffixes
Here is the practical way to interpret most Kenmore model numbers.
| Section | Example from your model | What it tells you |
|---|---|---|
| Manufacturer prefix | 106 | Who built the unit (Whirlpool-built Kenmore) |
| Product identifier | 63982301 | The exact design series and option set used to match parts |
The model prefix helps identify the design family, but the full model number is what ensures correct fit for common repairs.
- Ice maker and water system parts vary by series
- Door gaskets and shelves are size-specific
- Fan motors and defrost parts can differ by wiring and mounting
- Some parts look identical but have different electrical ratings
If you are troubleshooting a cooling or ice issue, the model-specific diagrams and procedures in the 10663982301 owner's manual help confirm what your refrigerator is equipped with and how it is supposed to operate.
If your refrigerator has an ice maker installed, matching by model helps you choose the correct assembly such as the ice maker assembly - refrigerator ice maker by whirlpool 4317943.
Using the full Kenmore model number prevents wrong-part returns and speeds up repairs because it ties your refrigerator to the correct parts list, wiring layout, and feature package.
Last updated: February 2026
