Kenmore 10658512800 side-by-side refrigerator Parts

Yes. On your Kenmore 10658512800 side-by-side refrigerator, we recommend DIY replacement for many non-sealed-system parts (bins, shelves, gaskets, ice maker, water filter) as long as you disconnect power first and reinstall all panels before running the refrigerator again; use the owner's manual for model-specific steps.

These repairs are typically straightforward with basic hand tools:

• Door bins and rails (lift out or snap in)
• Crisper and meat pans
• Water filter and filter cap
• Ice bin and many ice maker components
• Door gaskets and small door hardware

If you are ordering parts, start with the parts list for model 10658512800 on this page; for broader model searches and ordering, use Sears PartsDirect.

The manual for this model calls out key electrical and handling precautions. Use these every time:

• Unplug the refrigerator (or disconnect power) before servicing
• Do not use an extension cord when you restore power
• Replace all parts and panels before operating
• Use nonflammable cleaner when cleaning around parts and gaskets
• Use two or more people to move the refrigerator or remove doors

Most simple repairs on this style of Kenmore refrigerator use common tools:

Some repairs involve higher risk or specialized equipment. We treat these as pro-level:

• Sealed refrigeration system work (compressor, evaporator, condenser, capillary tube)
• Refrigerant handling or brazing/soldering
• Complex electrical diagnostics beyond basic checks

If your issue matches one of these symptoms, these model-listed parts are common starting points:

• Poor ice production or no ice: refrigerator ice maker WPW10190965
• No water at dispenser or ice maker: refrigerator inlet valve W10408179
• Bad taste/odor in water: genuine Kenmore refrigerator water filter EDR3RXD1

DIY repairs can restore cooling, water dispensing, and door sealing quickly, but skipping basic safety steps (power off, panels reinstalled) can create shock hazards and cause new problems like air leaks or frost buildup.

Last updated: February 2026

In a Kenmore 10658512800 side-by-side refrigerator, the most commonly replaced parts are the water filter, door gaskets, ice maker and dispenser-related parts, and defrost or temperature-control components. These items wear out first because they handle water flow, door sealing, and daily cycling; see the maintenance and care details in the 10658512800 owner's manual.

• Water filter: Improves taste and helps protect the water system from sediment buildup.
• Door gaskets and door-closing hardware: Helps prevent warm air leaks that cause frost and long run times.
• Ice maker and ice bin parts: Restores ice production and fixes jams or poor dispensing.
• Defrost parts: Prevents frost buildup that can block airflow and reduce cooling.
• Temperature control parts: Helps stabilize refrigerator and freezer temperatures.
• Water inlet valve: Fixes weak water flow to the dispenser or ice maker.

Here are several commonly replaced parts available for Kenmore 10658512800:

• Replace the water filter on schedule; a clogged filter can mimic valve or ice maker problems.
• Inspect door seals for gaps, tears, or areas that do not grip the cabinet evenly.
• If you see frost on the back freezer panel, focus on defrost components and airflow.
• Confirm the refrigerator is level; door alignment and closing can be affected by leveling (the manual describes leveling and door closing adjustments).
• For dispenser issues, check for kinked tubing and fully seated fittings (the manual notes pushing tubing into the fitting until it stops).

Most “refrigerator problems” are really airflow, sealing, or water-supply issues. Replacing the correct wear part first (filter, gasket, inlet valve, defrost component) restores performance faster and helps avoid unnecessary major repairs.

You can order replacement parts for your Kenmore 10658512800 from the parts list for this model, or search by model number on Sears PartsDirect.

Last updated: February 2026

Your Kenmore side-by-side refrigerator model 10658512800 has a total capacity of 21.9 cubic feet. For the exact breakdown between fresh food and freezer sections (and other specs like shelving and bin configuration), use the capacity and features details in the owner's manual.

We match capacity to the exact model number on the rating label so you do not accidentally use specs from a similar Kenmore 106-series unit.

• Check the model tag inside the fresh food compartment (usually on a side wall)
• Confirm the full model number is 10658512800 (all digits)
• Use the manual’s specifications section for the official capacity listing
• If you are comparing refrigerators, compare total capacity first, then layout

Capacity is the internal volume of both compartments combined. Usable space varies based on shelves, ice bin size, and door bin setup.

Knowing the correct cubic feet helps when you are planning kitchen fit, comparing replacement models, or estimating storage for groceries. It also helps when ordering organization parts like bins and pans that match your exact Kenmore model.

If you need replacement parts for your 10658512800 (for example, water filtration or storage bins), you can order from the parts list for this model or search by model number on Sears PartsDirect.

Last updated: February 2026

On Kenmore model 10658512800, the ice maker usually stops making ice because the water supply is restricted (shutoff valve not fully open or a kinked 1/4-inch water line), the wire shutoff arm is OFF (up), or the refrigerator is still in the 24 to 72 hour startup window. Use the owner's manual for the exact on/off and water hookup steps.

• Confirm the household water shutoff valve is fully open.
• Straighten any kinks in the 1/4-inch water source line behind the refrigerator.
• Make sure the ice maker wire shutoff arm is down (ON); do not force it.
• After turning the ice maker on, wait 24 hours for the first batch and up to 72 hours for full production.
• Empty the ice bin and keep items off the ice maker and out of the bin.

If the ice maker never refills, focus on water delivery and the fill system.

A common fix for a no-fill ice maker is replacing the refrigerator inlet valve W10408179.

A clogged filter can reduce water flow to the ice maker. Replace the cartridge on schedule; this model’s listed filter is the genuine Kenmore refrigerator water filter EDR3RXD1. For step-by-step help, use how to replace the water filter in a Kenmore refrigerator.

The ice maker depends on steady water flow and the correct shutoff arm position. Restoring proper flow prevents repeated no-ice cycles and slow production.

For replacement parts, order from the parts list for model 10658512800 or search by model number on Sears PartsDirect.

Last updated: February 2026