Frigidaire FEF365BGWC electric range Parts

On the Frigidaire FEF365BGWC electric range, most error codes clear with a power reset: turn the range off at the breaker (or unplug it) for 5 to 10 minutes, then restore power. If the code returns right away, the control is detecting an ongoing problem that needs troubleshooting.

Quick reset steps (safe and effective)

• Turn OFF the range circuit breaker (or unplug the cord if accessible).
• Wait 5 to 10 minutes to let the control fully reset.
• Restore power and set the clock.
• Try Bake and Broil to see if the code reappears.
• If the code comes back, stop using the oven until you identify the cause.

What to check if the code comes back

Many Frigidaire range codes are triggered by a few common issues:

• Stuck or shorted keypad (buttons not responding normally)
• Loose wiring connection at the control or sensor
• Failed oven temperature sensor (can cause temperature-related faults)
• Heating circuit problem (bake or broil element not heating correctly)

If you suspect a temperature-sensing issue, the oven temperature probe 5304497424 is the model-matched part to check or replace.

Common symptoms and likely direction

What you notice	What it usually points to	What to do next
Code appears immediately at power-up	Control/keypad or wiring issue	Inspect for stuck keys; check harness connections
Oven heats poorly, then code appears	Heating or temperature sensing issue	Check elements and sensor; verify connections
Broil works but bake does not	Bake circuit issue	Inspect/replace bake element 316075103

Why it matters

An error code is the range control telling you it is seeing an unsafe or out-of-range condition. Clearing the code without fixing the cause can lead to no-heat problems, overheating, or repeated shutdowns during cooking.

For code lookups by Frigidaire range type, use our Frigidaire manual clean range error codes reference.

Last updated: January 2026

A Frigidaire Gallery oven typically lasts 10 to 15 years. For a Frigidaire electric range like model FEF365BGWC, that same 10 to 15 year lifespan is the normal expectation; with steady cleaning and timely part replacement, many ranges run closer to 15 to 20 years.

What affects lifespan most

• Heat stress on components: frequent high-temp baking and broiling wears parts faster
• Power quality and wiring: loose connections can overheat terminals
• Cleaning habits: spills left to bake on can damage finishes and create hot spots
• Door seal condition: heat loss makes the oven work harder
• Repair history: replacing wear parts early prevents bigger failures

Common “wear parts” that may need replacement over time

If the oven stops heating evenly or takes much longer to preheat, these are the first items we check on an electric range:

• Bake element 316075103 (primary heat source for baking)
• Range broil element 5303051140 (top heat for broiling and some preheat cycles)
• Oven temperature probe 5304497424 (tells the control the actual oven temperature)
• Terminal block and power cord connections (signs of heat damage or arcing)

Quick “repair vs. replace” guide

If your range is…	Usually makes sense to…	Why
Under ~10 years old	Repair	Parts replacement is typically cost-effective
10 to 15 years old	Compare costs	Multiple repairs can add up
Over ~15 years old	Lean toward replace if major failure	Big-ticket parts and labor can exceed value

Why it matters

Knowing the typical lifespan helps you plan: if your FEF365BGWC is already in the 10 to 15 year range, a no-heat issue often points to a serviceable part (like a heating element or temperature sensor) rather than the entire range being “done.”

For display or fault messages, use our Frigidaire manual clean range error codes reference to narrow the problem before ordering parts.

Last updated: January 2026

The model number for your Frigidaire electric range is on the appliance’s rating label, not on the control panel. On ranges like the FEF365BGWC, the label is most often found around the oven door opening or on the storage drawer frame; match it exactly when ordering parts.

Where to look on a Frigidaire range

Check these common spots first:

• Along the oven frame behind the oven door (open the door and look around the front opening)
• On the drawer frame behind the storage drawer (pull the drawer out and look on the frame)
• On the lower front frame area near the drawer opening
• On the side trim just inside the door opening

What the label looks like

The rating label usually includes several identifiers. Use the model number for parts lookup.

Label item	What it’s used for	Example format
Model number	Finding the correct parts diagrams and parts list	FEF365BGWC
Serial number	Manufacturing date and production run info	Letters and numbers
Electrical rating	Confirms voltage and amperage requirements	240V, amps

Tips to avoid ordering the wrong part

Use these quick checks before you buy:

• Copy the model number exactly (letters and numbers, no spaces)
• If there’s a revision or suffix on the label, include it when searching
• Compare your part visually to the diagram before ordering
• If you are replacing a heating part, confirm whether it’s bake or broil (for example, bake element 316075103 vs range broil element 5303051140)

Why it matters

Frigidaire ranges often have similar-looking parts across model families, but mounting points, wiring terminals, and wattage can differ. Using the exact model number from the rating label helps ensure the replacement part fits and performs correctly.

Last updated: March 2026