Whirlpool W5CG3024XS01 30" gas cooktop Parts

Yes. Whirlpool sells replacement parts for the Whirlpool W5CG3024XS01 30-inch gas cooktop through authorized parts channels, including Sears PartsDirect, so you can match parts by model number and replace items like burner components, ignition parts, and gas-supply components with the correct fit.

Best way to get the right part for W5CG3024XS01

We recommend using the model number first, then confirming the part by name and diagram location.

• Find the model/serial rating plate on the underside of the cooktop base (this is where installation clearances are referenced).
• Use the exact model number W5CG3024XS01 when searching.
• Match the part name to the symptom (ignition, gas smell, weak flame, broken knob).
• Compare the part ID to your parts list before ordering.
• If you are converting gas type or touching the gas line, follow the steps and safety notes in the installation guide.

Common replacement parts customers order for this cooktop

These are examples of genuine-fit parts available for this model.

What it affects	Part example (model-matched)	When it’s commonly needed
Gas pressure control	Regulator W11087445	Flame issues, regulator failure, gas supply work
Ignition sparking	Spark module WPW10110491	No spark, constant clicking, weak/erratic spark
Burner hardware	Range burner head WPW10256027	Uneven flame, damaged burner head
User controls	Cooktop knob W10284886	Cracked, loose, or missing knob

Why it matters

Using model-matched Whirlpool parts helps the cooktop light reliably and burn cleanly. It also reduces installation problems caused by mismatched burner caps, orifices, or gas-supply components.

Safety note for gas cooktop parts

If a repair involves the gas supply connection, we follow the installation process: open the shutoff valve correctly and test connections with an approved noncorrosive leak-detection solution (bubbles indicate a leak). For any gas-line work, we recommend using the installation guide steps and having a qualified installer handle the connection.

Last updated: February 2026

Yes. Whirlpool is a solid, widely trusted brand for gas cooking, and the Whirlpool W5CG3024XS01 30" gas cooktop is built to meet established gas-safety and installation standards when installed correctly. For best performance and safe operation, follow the requirements in the W5CG3024XS01 installation guide.

What “good” means for a gas cooktop

A good gas cooktop consistently lights, holds a steady flame, and runs safely on the correct fuel type (Natural gas or LP after proper conversion). For W5CG3024XS01, the installation instructions specify that the unit is factory set for Natural gas and must be converted properly for LP use.

Practical signs you will notice day to day

• Burners ignite reliably without repeated clicking
• Flame is steady (not lifting, fluttering, or going out)
• Simmer stays low without frequent relighting
• Knobs turn smoothly and valves respond predictably
• No gas odor; shutoff valve is accessible and usable

Installation and fuel setup matter more than the logo

Even a great brand will perform poorly if gas pressure, regulator setup, or conversion is wrong. This model requires using the supplied gas pressure regulator and following leak-testing instructions.

Key setup checkpoints (W5CG3024XS01)

Item	What to verify	Why it matters
Gas type	Natural gas vs LP conversion	Wrong fuel setup causes poor flame and safety issues
Shutoff valve	Installed in same room, accessible	Lets you quickly turn gas off for service
Regulator	Correct orientation and used as specified	Stabilizes pressure for consistent burner performance
Leak test	Per manufacturer instructions	Confirms safe connections before use

When a “brand problem” is actually a part problem

If burners will not light, keep clicking, or spark randomly, the issue is often ignition-related rather than the cooktop itself. On this model, common ignition components include the spark module WPW10110491 and burner hardware.

Why it matters

Gas appliances are only as good as their installation and fuel setup. Correct gas type, proper conversion, correct pressure regulation, and leak testing protect your home and also deliver the steady heat and control you expect from a Whirlpool cooktop.

Last updated: February 2026

Whirlpool gas cooktops, including model W5CG3024XS01, are made by Whirlpool Corporation, the appliance manufacturer behind the Whirlpool brand. For model-specific details such as gas type, installation requirements, and rating plate location, use the W5CG3024XS01 installation guide.

What “Whirlpool” means for this cooktop

Whirlpool is the brand and the manufacturer for this cooktop line. That matters when you are matching parts (like burner components, valves, and ignition parts) because Whirlpool part IDs and fitment are model-specific.

Common items you may replace on a Whirlpool gas cooktop

• Gas pressure regulator
• Spark module (ignition)
• Burner head and burner cap
• Burner valve and manifold components
• Knobs and wiring harness

Where to confirm the exact configuration

The installation instructions for this cooktop family explain that it is design-certified for Natural gas and can be converted to LP gas using the provided conversion instructions; the model/serial rating plate on the underside of the cooktop base lists the approved gas types.

What you want to confirm	Where to check	Why it matters
Natural gas vs LP gas	Rating plate (underside)	Correct orifice sizing and safe operation
Regulator orientation and access	Installation instructions	Prevents leaks and service issues
Gas supply line and shutoff valve access	Installation requirements	Ensures proper flow and safe shutoff

Why it matters

Using the correct Whirlpool-made parts and following the correct Whirlpool installation requirements helps prevent ignition problems, poor flame quality, and gas leaks. If you are replacing the regulator, match it to the model and use the correct part ID, such as the regulator W11087445, to ensure proper inlet pressure control.

Last updated: February 2026