Kenmore 25326742103 freezer Parts

Kenmore upright freezer model 25326742103 has a capacity of 20.0 cubic feet. You can also confirm the capacity and other specifications by checking the model and serial tag inside the cabinet and the specs section of the 25326742103 owner's manual.

Where to confirm the capacity on the appliance

Use these common locations to verify you are reading the correct information for your exact unit:

• Serial plate on the upper left interior wall (upright models)
• Specifications section of the 25326742103 owner's manual
• Model and serial number label area near the top interior wall

Capacity vs. usable storage space

The official cubic feet rating is the interior volume; shelves, bins, and frost buildup affect how much you can practically store.

Measurement	What it represents	What can change it day to day
20.0 cu. ft. capacity	Total interior volume rating	Nothing (it is a fixed spec)
Usable space	How much food fits comfortably	Shelf/bin layout, packaging, frost buildup

Parts that help you use the space better

These parts do not change the 20.0 cu. ft. rating, but they improve organization and help prevent space loss from frost or poor sealing:

• Freezer shelf 216937701 for restoring shelf storage
• Freezer door bin 216951600 for organized door items
• Freezer door gasket 5304507200 to keep a tight seal and reduce frost buildup

Why it matters

Knowing the correct capacity helps with meal planning, bulk storage decisions, and choosing storage bins that keep airflow clear so the freezer maintains temperature evenly.

Last updated: January 2026

Most upright freezers, including Kenmore model 25326742103, typically last 10 to 20 years; 12 to 15 years is a common real-world range. Consistent maintenance (good airflow, a tight door seal, and proper defrosting/cleaning) is what most often determines whether you land on the low or high end.

What affects lifespan the most

• Air circulation and heat: Upright freezers can run hot on the outside as the compressor moves heat out; leaving space around the cabinet helps prevent overwork.
• Door sealing and alignment: If the freezer is not level, the door can misalign and leak air, which increases frost and run time.
• Frost and moisture control: Frequent door openings and poor food wrapping increase frost buildup and strain the cooling system.
• Cleaning habits: Regular interior cleaning and keeping airflow paths clear helps efficiency.
• Usage and environment: Hot garages, high humidity, and heavy daily use shorten life.

Maintenance checklist that helps you reach the 15 to 20 year range

• Level the cabinet so the door closes and seals easily (a slight “self-close” is ideal).
• Keep the door openings short; organize food to avoid long searches.
• Let hot foods cool before loading; overloading forces longer compressor run time.
• Wrap foods well and wipe containers dry to reduce frost buildup.
• Defrost and clean when frost reaches about 1/4 to 1/2 inch (for non-frost-free conditions).

Quick guide: “normal aging” vs “repair time”

What you notice	Often normal	Often needs repair
Longer run times in hot weather	Yes	No
Frost building up quickly	No	Yes (door seal, door alignment, defrost issue)
Temp alarm or error indications	No	Yes (control/sensor/cooling issue)
Warm cabinet sides	Yes	No

Why it matters

A freezer that runs longer than it should uses more electricity and can develop heavy frost, temperature swings, and premature compressor wear. Simple setup steps like leveling and allowing airflow can add years of service life.

For model-specific operating and care details, follow the 25326742103 owner's manual. For control-related alerts, use the Kenmore electronic control module freezer error codes reference.

Last updated: January 2026

On Kenmore upright freezer model 25326742103, the model and serial number label is typically on the upper left wall inside the freezer compartment. This is the most common location for upright models and is the first place we recommend checking using the 25326742103 owner's manual.

Common label locations to check

Look for a paper or metal rating label in these spots:

• Upper left interior wall (most common for upright models)
• Interior side wall near the top shelf area
• Ceiling area inside the cabinet (some upright designs)
• Behind the lower kick plate or base panel (if your unit has one)
• Rear exterior panel (less common, but worth a quick check)

Quick tips to find it faster

These steps help you spot the label without a full unload:

• Use a flashlight and look along the upper left interior wall first
• Check around the door opening and liner seams where labels are often placed
• Wipe frost or condensation off the wall so the print is readable
• Take a photo of the label so you can zoom in on the model and serial numbers
• Record both the model number and serial number for parts lookup and service

What the model number looks like

For this Kenmore freezer family, the model number format commonly starts with 253 (and some related models may start with 970). Your exact model is 25326742103.

What you need	Example	Why it’s used
Model number	25326742103	Identifies the exact design and parts list
Serial number	Varies	Helps match production changes and date codes

Why it matters

Using the correct model number prevents ordering the wrong door gasket, electronic control, or defrost parts. Even small design changes can affect fit and wiring connections.

Last updated: January 2026