Kenmore Elite 79075503202 range Parts

Yes. We still support Kenmore appliances with replacement parts, and for Kenmore Elite range model 79075503202 you can order common service items like oven light components, burner parts, and heating parts by matching your exact model number and the part ID/part number.

How to make sure you get the right part

Using the full model number is the fastest way to avoid ordering the wrong item. On 79075503202, the model and serial tag is typically on the front frame (visible when the oven door is open) or inside the drawer along the side of the frame; confirm it before you shop.

• Use the complete model number: 79075503202
• Match the part by part name + part ID (best) and confirm the part number
• Compare your old part to photos and mounting style (tabs, terminals, screw holes)
• If your range has multiple ovens or burners, verify which section the part fits
• Keep your purchase date and serial number recorded for reference

Parts you can commonly replace on this model

These are examples of parts available for Kenmore Elite range 79075503202:

What you are fixing	Example part (ID)	What it affects
Oven light not working	Range oven light bulb 316538904	Interior oven lighting
Light still out after bulb	Range oven light socket 316116400	Power connection to bulb
Oven not baking evenly or not heating	Bake element 318255201	Main bake heat source
Burner flame issues	Range surface burner head 316212400	Flame pattern and ignition

Why it matters

Kenmore appliances were produced across multiple manufacturing platforms over the years, so the same-looking range can use different components. Matching 79075503202 to the correct part ID helps ensure proper fit, safe wiring connections, and correct heating performance.

Where to confirm specs and part callouts

For model-specific diagrams, part locations, and service notes, use the 79075503202 owner's manual and the 79075503202 installation guide.

Last updated: February 2026

To reset your Kenmore Elite range model 79075503202, we recommend doing a simple power reset first: turn the range off, shut off power at the breaker for 1 to 5 minutes, then restore power and reset the clock. This clears many control glitches after a power interruption.

Quick reset options (most common)

• Power reset (recommended): breaker OFF 1 to 5 minutes, then ON
• Cancel a running function: press CLEAR/OFF to stop Bake, Broil, Timer, or a delayed cycle
• After restoring power: set the clock again (the control typically requires it after power is restored)

Step-by-step: power reset (safe, no tools)

1. Make sure the oven is not in a self-clean cycle and the oven cavity is cool.
2. Turn the range OFF.
3. Switch the range circuit breaker OFF (or unplug if accessible).
4. Wait 1 to 5 minutes.
5. Restore power.
6. Set the clock using the steps in the 79075503202 owner's manual.

If you were trying to “reset” because the oven will not stop beeping

On this model, the control can beep at the end of a timed bake until you press CLEAR/OFF. If the beeping continues, cancel the active cooking mode first, then do the power reset.

Symptom	What to do	What it affects
Oven is running a mode you want to stop	Press CLEAR/OFF	Cancels the active cycle
Display acting odd after outage	Do a power reset	Reboots the electronic control
Clock is wrong after reset	Set the clock	Restores normal time functions

Why it matters

A power reset reboots the electronic oven control and often clears stuck keypads, odd displays, and post-outage glitches without replacing parts.

Last updated: February 2026

On the Kenmore Elite range model 79075503202, PF means power failure. It shows up when the oven’s control detects that electrical power was interrupted (even briefly), and it’s a reminder to reset the clock and confirm the oven is operating normally.

What to do when PF appears

• Press CLEAR/OFF to clear the display.
• Reset the clock and re-enter any cooking settings.
• If the oven was running, check food safety and restart cooking as needed.
• Confirm the range is plugged in firmly and the cord is not loose.
• Check your home breaker for a tripped circuit.

If PF keeps coming back

Repeated PF messages usually point to an intermittent power issue (outlet, breaker, cord connection, or wiring at the range).

Quick checks

• Try a different high-load appliance on the same circuit to see if power is unstable.
• Look for flickering lights or other signs of voltage drop.
• If the range was recently installed or moved, verify the power connection is secure (see the installation guide).

Why it matters

A power interruption can stop a bake or broil cycle and may reset electronic settings. Clearing PF and confirming stable power helps prevent uneven cooking and nuisance shutdowns.

PF troubleshooting at a glance

PF behavior	Most likely cause	Best next step
PF after a storm/outage	Utility power interruption	Clear PF, reset clock
PF after using another appliance	Circuit overload or weak connection	Check breaker and outlet
PF randomly, often	Loose terminal/outlet connection	Review install wiring; service if needed

Last updated: February 2026

We list parts and documentation for the Kenmore Elite range model 79075503202, not a Kenmore Elite dryer; dryer capacity is measured in cubic feet, while this range is sized by cutout width and overall dimensions shown in the 79075503202 installation guide.

How to identify the correct appliance before looking up capacity

Dryer capacity depends on the exact dryer model number. For Kenmore appliances, we use the model number to match the right specs and parts.

• Check the model tag location described in the 79075503202 owner’s manual (oven door open, or inside the drawer along the side frame)
• If your tag says 790.75503202, you have a Kenmore Elite range, not a dryer
• If your tag is on a dryer door opening or rear panel, use that dryer model number instead
• Use the full model number, including any prefix/suffix digits

What we can confirm for model 79075503202 (range sizing)

From the installation information for this Kenmore Elite range, these are the key fit dimensions you will use for planning and installation.

Measurement (range)	Typical use	Value shown in guide
Cutout width	Cabinet opening	30 in
Height (standard)	Counter alignment	36 in
Height (minimum)	Leveling feet range	35 3/8 in
Depth to front of range	Fit against cabinets	25 7/8 in

If you meant “Kenmore Elite dryer capacity”

Most Kenmore Elite full-size dryers are commonly in the 7.0 to 9.2 cu. ft. range, depending on the exact model and whether it is a compact or full-size unit.

• Compact dryers: often around 3.5 to 4.5 cu. ft.
• Standard full-size dryers: often around 7.0 to 8.0 cu. ft.
• Extra-large dryers: often around 8.8 to 9.2 cu. ft.

Why it matters

Capacity is only meaningful when it matches the correct product type and model number; using a range model (79075503202) to look up dryer capacity leads to the wrong specifications and the wrong replacement parts.

Last updated: February 2026

For Kenmore Elite range model 79075503202, we list the model and serial number on the identification plate (serial plate). You can see it with the oven door open on the front frame of the range, or inside the drawer along the side of the frame; the installation instructions also note it on the drawer side frame.

Common places to check on model 79075503202

• Open the oven door and look along the front frame (around the door opening).
• Pull out the storage/warming drawer and check inside the drawer opening.
• Look on the drawer side frame (the side rail/frame area the drawer slides against).
• Wipe grease or cleaner residue off the label so the numbers are readable.
• Use a flashlight; the plate is often low and easy to miss.

What you should write down (and why)

Having the full ID helps us match the correct Kenmore parts, wiring, and hardware for your exact build.

Item to record	What it’s used for	Example format
Model number	Correct parts lookup	79075503202
Serial number	Production run details	Letters and numbers
Lot number/letter (if shown)	Extra build identification	Single letter/number

Tips if the label is hard to read

• Take a close-up photo and zoom in.
• Copy the number exactly, including leading zeros.
• If the drawer is stuck, follow the drawer removal steps in the 79075503202 installation guide.

Why it matters

Kenmore Elite ranges can look similar across model series, but parts like a bake element, probe, or control panel can vary by model and serial range. Using the exact model number prevents ordering the wrong replacement part.

Last updated: February 2026

Kenmore model 790.75503202 is a Kenmore Elite dual fuel range built on a Frigidaire (Electrolux/Frigidaire) platform; the 790 model prefix is the key identifier used to tie Kenmore ranges like this one back to Frigidaire manufacturing. For confirmation details, check the identification plate location shown in the 79075503202 owner’s manual.

How to confirm on the appliance ID plate

The model and serial tag on this range is typically found in one of these spots:

• On the front frame of the range, visible when the oven door is open
• On the inside of the drawer, along the side of the frame
• On the frame area near the drawer opening

What you are looking for

• A model number that begins with 790 (often shown as 790.75503 on some documents)
• A serial number on the same plate (useful for service and parts matching)

Why the “790” prefix matters

Kenmore is a brand name used on appliances made by several manufacturers. The prefix in the model number indicates the manufacturing source used for parts design and service information.

What you see on the tag	What it indicates	Why it helps
790.75503202 (or 790.75503)	Frigidaire-built Kenmore Elite range	Helps you match the correct wiring, controls, and replacement parts

Parts and service tip for this model

When ordering parts or troubleshooting, always match the full model number 79075503202 (not just 790.75503). That prevents mix-ups with similar Kenmore Elite ranges.

• Use the full model number when selecting oven controls, burner parts, and electrical components
• If you are replacing a common wear item, match by model first, then by part ID
• Example wear item: the range oven light bulb 316538904 fits this model’s parts catalog and is treated as an expendable item in the manual

Why it matters

Knowing Frigidaire is the manufacturing platform for Kenmore Elite 79075503202 helps you use the right technical information (wiring diagrams, control logic, and parts breakdowns) so repairs go faster and parts fit correctly.

Last updated: February 2026

Kenmore is a brand name, so replacement parts for your Kenmore Elite range model 79075503202 are typically manufactured by the original equipment manufacturer (OEM) that built the range and its components. The most reliable way to match the correct OEM part is to use the model number and the parts list in the 79075503202 owner's manual.

What this means when you shop for parts

Kenmore parts commonly come from major OEM suppliers that build appliances for multiple brands. For a range like 79075503202, you will often see parts labeled with another manufacturer name on the packaging even though they are correct for Kenmore.

Common examples you may run into:

• Parts packaged as Frigidaire/Electrolux-family components
• Parts packaged under other OEM supply chains (varies by component)
• Parts that list a manufacturer part number and a Sears PartsDirect part ID
• “Expendable” items (like light bulbs) that are replaced routinely

How we recommend confirming the right replacement part

Use the model number 79075503202 and match by part ID, part name, and where it installs on the range.

Checklist:

• Confirm the full model number from the ID plate (often visible with the oven door open)
• Match the part by description and location (oven cavity, cooktop, control area)
• Compare the part number and the Sears PartsDirect part ID
• If the symptom is electrical (no heat, no lights), shut off power at the breaker before checking parts

Example: a common Kenmore range replacement part

What you need	Example part for this model	What it fixes
Oven light	Range oven light bulb 316538904 (part number 5303013071)	Burned-out oven light

Why it matters

Kenmore branding can make parts sourcing confusing, but the correct part is determined by the model number and parts breakdown, not the name printed on the box. Matching by model 79075503202 helps ensure proper fit, safe operation, and correct electrical ratings.

Last updated: February 2026

If your Kenmore Elite range model 79075503202 oven is not working, the most common causes are a power supply problem, a control fault (beeping with an F-code), or a failed heating component such as the bake element. Start with the quick power and control checks in the 79075503202 owner's manual.

Quick checks first (no disassembly)

• Confirm the range cord is fully seated in the outlet.
• Check the home breaker(s) for a tripped condition (ranges often use a 2-pole breaker).
• If there was a power outage, turn the oven controls OFF, then retry.
• If the control is beeping and shows F1, F3, or F9, press CLEAR to stop the beeping and reprogram.
• Verify you are using the correct oven mode (Bake vs Broil) and temperature setting.

What the display and beeping mean

The manual notes that if the oven control beeps and displays F1, F3, or F9, the electronic control detected a fault. Clear it, try again, and if it returns, record the code and proceed with service-level troubleshooting. Use the wiring and access guidance in the 79075503202 installation guide before removing panels.

Symptom	Most likely area	What to do next
Entire range or oven dead	Power supply, cord, house wiring	Check outlet seating and breaker; restore power
Beeping with F1/F3/F9	Electronic control fault	Press CLEAR; if it recurs, record code
Oven runs but does not heat	Heating circuit (bake/broil), sensor/probe	Inspect elements; test components with a meter

Parts that commonly fix “oven not heating”

If the oven powers on but will not heat, these model-compatible parts are common suspects:

• Bake element 318255201 (primary heat source in Bake)
• Probe 316217002 (temperature sensing; can cause poor or no heat if failed)
• Terminal block 5304409888 (power connection point; heat damage can interrupt power)

Why it matters

An oven that is completely dead points to power delivery or control issues, while an oven that powers up but will not heat points to the heating circuit. Separating those two symptoms prevents unnecessary part replacement and speeds up the repair.

Last updated: February 2026