Kenmore Elite 10651719411 refrigerator Parts

The cubic-foot capacity for Kenmore Elite model 10651719411 is shown in the specifications section of the owner's manual and on the model and serial tag inside the refrigerator. Most Kenmore 106 side-by-side refrigerators are in the 22 to 26 cu. ft. range.

Look in these places; manufacturers often list total capacity and sometimes split fresh food vs. freezer:

• The model and serial tag inside the fresh food compartment (side wall near crispers is common)
• The specifications section of the owner's manual
• A product data/spec page included in the manual packet (if your manual includes one)

Use this to sanity-check what you find on the label or in the manual.

Capacity helps when comparing refrigerators, but it also affects usable space. If bins or drawers are missing or broken, replacing them restores the storage layout the refrigerator was designed for.

These common fit parts for this model can help you get back lost shelf and door space:

• Refrigerator door bin WPW10160952
• Refrigerator crisper drawer WPW10508336
• Refrigerator snack pan drawer WPW10508335

Last updated: February 2026

Kenmore Elite first launched as a premium Kenmore line in 1999. Your specific Kenmore Elite side-by-side refrigerator model 10651719411 was produced later than that; the exact build year is determined from the refrigerator’s serial number and the date-code format shown in the owner's manual.

We use the serial number (not the model number) to pinpoint the manufacturing date.

• Look for the serial tag inside the fresh food compartment (often on a side wall near the crisper drawers).
• Also check the cabinet frame behind the door, or the back of the unit near the lower access area.
• Write down the full serial number exactly as shown.
• Use the manual’s serial/date-code section to translate the digits into a month and year.
• If the label is worn, take a clear photo and zoom in to capture every character.

Knowing the build year helps us match the correct parts and revisions for your Kenmore Elite refrigerator, especially for common maintenance and repair items like the Kenmore refrigerator water filter 9081, the refrigerator ice maker assembly WPW10251076, and the refrigerator electronic control board W10898445. It also helps when troubleshooting symptoms that vary by production run.

If your display is showing an error or the dispenser is acting up, we use model-family troubleshooting steps to narrow it down quickly; see Kenmore 106 model refrigerator error codes.

Last updated: February 2026

The most common issues we see on the Kenmore Elite 10651719411 side-by-side refrigerator involve ice and water problems, warm temperatures from airflow/defrost trouble, and door sealing or light-switch complaints. Use the 10651719411 owner's manual to confirm control settings and the recommended checks for your exact configuration.

• Ice maker not making ice: clogged water filter, low water pressure, failed inlet valve, ice maker module issue
• Water dispenser slow or not dispensing: restricted filter, frozen reservoir/line, inlet valve problem
• Refrigerator or freezer not cold enough: blocked vents, dirty condenser area, evaporator fan airflow issue, defrost system problem
• Frost buildup on freezer back wall: defrost failure or airflow restriction at the evaporator cover
• Door not closing or warm spots: worn/warped door gasket, bins/shelves interfering, door alignment
• Interior lights not working or staying on: door switch or light switch issue

1. Verify temperature settings and that vents are not blocked by food packages.
2. Replace the water filter if flow is weak or the filter is overdue; use the correct Kenmore refrigerator water filter 9081.
3. Confirm the doors seal tightly all the way around; look for gaps, tears, or areas that feel loose.
4. Listen for the evaporator fan in the freezer (a steady fan sound when the door switch is pressed).
5. Check for heavy frost behind the freezer’s rear panel, which points to a defrost/airflow issue.

Ice, water, and airflow issues can cascade: a restricted filter or weak inlet valve can stop ice production, while poor airflow or a leaking gasket forces longer run times and can cause temperature swings and frost.

Last updated: March 2026