Kenmore 25368882013 refrigerator Parts

On the Kenmore refrigerator model 25368882013, the upper section is typically called the freezer compartment (or simply the freezer). It’s the coldest area of the appliance and is designed to keep foods frozen and support proper temperature separation from the fresh food section; see the 25368882013 installation guide for door and cabinet setup basics.

In a top-mount refrigerator like the Kenmore 25368882013, the freezer compartment is built to:

• Maintain freezing temperatures for long-term food storage
• Help regulate overall cooling by separating freezer and fresh food airflow
• Support ice making (if your model is equipped with an ice maker)
• Keep frozen items organized with shelves, bins, and door storage

Different manuals and parts diagrams may use slightly different terms. Here’s a quick reference:

Knowing the correct name helps when you’re diagnosing cooling problems or ordering parts. For example, frost buildup in the freezer can point to a defrost system issue, while warm temperatures in the fresh food compartment can be caused by airflow restrictions from the freezer.

If you’re working on cooling or airflow concerns, these are common freezer-related parts and areas to check:

• Door seal and door alignment (air leaks cause frost and temperature swings)
• Toe grille area (blocked airflow can reduce cooling performance)
• Evaporator fan area (moves cold air from the freezer into the refrigerator section)
• Defrost system components (heater and thermostat help prevent ice buildup)

Last updated: January 2026

On Kenmore refrigerator model 25368882013, we clean the drip pan by safely unplugging the refrigerator, pulling it out far enough to access the lower rear area, removing the pan, washing and disinfecting it, then reinstalling it and restoring power. Use the 25368882013 installation guide for safe moving and positioning steps.

• Unplug the refrigerator before you reach behind or underneath it.
• Pull the refrigerator straight out; avoid side-to-side shifting to protect flooring.
• Locate the drip pan near the bottom rear (typically by the compressor area).
• Slide the pan out carefully; if it resists, check for a retaining clip or cover.
• Wash with hot water and dish soap; scrub residue with a soft brush.
• Disinfect, then rinse and dry completely before reinstalling.
• Slide the pan back in fully so it sits level and won’t rattle.

A dirty drip pan can cause persistent refrigerator odors and can attract pests. Keeping it clean also helps you spot issues early, such as a clogged defrost drain (excess water) or a leak.

• Keep enough slack in any water line so you can move the refrigerator out for cleaning.
• Do not block the toe grille; airflow is important for proper cooling.
• After moving it back, recheck for any water leaks within 24 hours if your unit is connected to a water supply.

Last updated: January 2026

For Kenmore refrigerator model 25368882013, the model number alone usually does not state the exact cubic-foot capacity. The most reliable way is to look up the capacity in the product specifications section of the 25368882013 owner's manual; if you need a quick estimate, you can calculate interior volume from measurements.

• Check the specifications section in the 25368882013 owner's manual for listed capacity.
• Look for a rating label inside the fresh food compartment (often on a side wall, ceiling, or behind a crisper drawer); it sometimes lists capacity.
• Search the full model number 25368882013 on the appliance ID label and match it to published specs.
• Estimate capacity by measuring the usable interior space and converting cubic inches to cubic feet.

1. Empty the compartment you are measuring (fresh food and freezer are often calculated separately).
2. Measure width x depth x height of the usable interior space in inches.
3. Multiply to get cubic inches.
4. Divide by 1,728 to convert to cubic feet.

Model numbers like 25368882013 are best for identifying the correct parts (door gasket, evaporator fan motor, defrost heater, shelves, drawers), but they are not a consistent “capacity code.” Some older series patterns can hint at size, but they are not accurate enough to rely on for ordering or comparing refrigerators.

Cubic-foot capacity affects food storage planning, energy use expectations, and whether replacement parts like bins and shelves fit your layout. Using the manual specs avoids guessing and prevents mismatches.

Last updated: January 2026